Sort by: Relevance
Cnc usb controller keygen in Title/Summary
CNC motion controller is a link between personal computer and drivers for stepper or servo motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).
CNC Studio USB is a program that connects a PC, notebook or netbook with the USB Port of a CNC machine with a parallel port. The application can be used to control any CNC machine which has a parallel port and which uses clocking / direction signals as actuation.
- Publisher: GoCNC
- Home page: gocnc.de
- Last updated: January 21st, 2014
USB 16 Servo Controller is ideal for making PC based systems which run over Hobby Servo motors. The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system. The compact module measures just 80 mm X 47 mm, and it offers both USB and asynchronous serial (UART) connectivity.
- Publisher: Robokits
- Home page: robokits.co.in
- Last updated: April 27th, 2012
Cnc usb controller keygen in Description
North American Tool has created Thread Mill Application Software that works in conjunction with your CNC machine controller. This software generates the helical interpolation for the CNC program (in G-code) necessary to run your thread mills. Just enter the basic thread parameters, then follow the computer instructions.
- Publisher: North American Tool
- Home page: www.natool.com
- Last updated: April 17th, 2010
ATC Lite is a software interface for the ATC200-LITE-USB antenna controller. The program helps you configure and and set parameters for the antenna. The ATC200-LITE-USB controller serves as an interface between a local PC and remote electrical downtilt (RET) devices installed at a base station site.
- Publisher: Andrew Corporation
- Last updated: March 26th, 2013
ZylSerialPortAX is a thread based asynchronous serial port ActiveX control.
Use ZylSerialPortAX control to easily communicate with external devices on serial port connection, such as modems, bar code readers, GSM modules and others.
You can use it also with USB, IrDA and Bluetooth devices, because these devices have a driver that redirects the input from the USB, IrDA or Bluetooth port.
- Publisher: Zyl Soft
- Home page: www.zylsoft.com
- Last updated: November 30th, 2011
V-CNC system (cnc simulator) analyses a NC code programmed and transmits machine-commands to the virtual controller. The Virtual CNC machine simulates the NC code in the 3-dimentional environments.
V-CNC(cnc simulator)is educational software for machining part based on PC environment. Trainer can achieve high efficiency in CNC education with lowbudget.
USB Drivers Download Utility will walk you through updating, backing-up, restoring and deleting drivers. When your drivers are managed properly your PC and hardware can show increased speed, stability, performance and new features. Hardware manufacturers are constantly improving their products and often release several driver updates a year.
- Publisher: LionSea.com
- Home page: www.lionsea.com
- Last updated: October 15th, 2013
Additional Cnc usb controller keygen selection
The Advanced USB Port Monitor design enables users to use it with any USB device, extending beyond the lab environment to the personal workstations of USB developers and advanced USB device users.
Most users - USB hardware and software developers, advanced users - will appreciate the value and benefit of having a personal USB monitor and analyzer tool to fit their individual needs..
- Publisher: AGG Software
- Home page: www.aggsoft.com
- Last updated: September 21st, 2011
Hi-Speed USB Flash Disk Utility Prolific Edition. The USB Flash Disk Utility developed by Prolific Technology Inc. for PL-2515PRO / PL-2518 Controllers is a free and very easy to use and install software.The utility is also backward compatible with PL-2515 Controllers
- Publisher: Prolific Technology Inc.
- Home page: www.prolific.com.tw
- Last updated: March 10th, 2008
Solo Performer Show Controller supports a variety of audio formats including mp3, midi, wave, and aiff.
The software plays background audio, displays lyrics, controls MIDI effects, and controls light shows.
MIDI effects can be changed automatically during song playback.
Use Z-Tool with your laptop and any popular
Z-Wave USB interface to quickly and easily set up your Z-Wave home network.
Then, attach the Z-Wave interface to any Z-Wave enabled software or hardware control system for total Z-Wave control of your home!
- Publisher: HomeSeer Technologies
- Home page: www.homeseer.com
- Last updated: April 7th, 2012
AVM ISDN-Controller FRITZ!Card USB is the compact communication center for your ISDN line. Simply connect FRITZ!Card to your PC's USB port, and you can surf the Internet, transfer files, send and receive faxes even while you're on the phone. Lightweight and compact, FRITZ!Card USB is easy to take along with you and comes in handy when you travel.
XU is an universal input transmitters programming software.
The XU Universal Input Transmitters Programming software has the following necessary features like :
-Easy user programming using USB connection.
-No power required while programming.
-No calibration required after range has been programmed.
- Publisher: Intech Instruments Ltd
- Home page: www.intech.co.nz
- Last updated: October 31st, 2011
In your aircraft you must install a communication software which realizes the data transfer between the USB-Controller and flight simulator. For FS2004 these communication software are the ActivePanel-Gauges. In FSX you can also use the ActivePanel-Gauges or the new by Microsoft developed software interface SimConnect. Both systems are descibed detailed in a separate document.
USB Disk Security is a program that allows you to block threats that can damage your PC or compromise your personal information via USB storage. It can prevent unauthorized persons from stealing your data and it has support for USB drives, flash disks, secure digital cards, thumb drives, pen drives, removable storage and iPods.
PTZ Controller is PTZ keyboard simulator. It controls high speed Pan Tilt Zoom cameras through standard computer keyboard and mouse. It is more powerful than traditional PTZ keyboard hardware.
PTZ Controller controls PTZ camera through RS232 port directly, or through RS485, RS422, USB port with a converter.
VMLite Android App Controller is a free program that enables you to support VMLite VNC Server on non rooted Android devices. The program allows you to connect your Android device to the desktop computer and start the VMLite VNC Server in order to enable the USB debugging.
- Publisher: VMLite Corporation
- Home page: www.vmlite.com
- Last updated: September 16th, 2013