Cnc usb controller serial in Title/Summary
CNC motion controller is a link between personal computer and drivers for stepper or servo motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).
USB to Serial Adapter 2.0
- Publisher: Sitecom UK Ltd
- Last updated: March 12th, 2008
CNC Studio USB is a program that connects a PC, notebook or netbook with the USB Port of a CNC machine with a parallel port. The application can be used to control any CNC machine which has a parallel port and which uses clocking / direction signals as actuation.
- Publisher: GoCNC
- Home page: gocnc.de
- Last updated: January 21st, 2014
Cnc usb controller serial in Description
ZylSerialPortAX is a thread based asynchronous serial port ActiveX control.
Use ZylSerialPortAX control to easily communicate with external devices on serial port connection, such as modems, bar code readers, GSM modules and others.
You can use it also with USB, IrDA and Bluetooth devices, because these devices have a driver that redirects the input from the USB, IrDA or Bluetooth port.
- Publisher: Zyl Soft
- Home page: www.zylsoft.com
- Last updated: November 30th, 2011
Sun's Amplifier Set Up Software was developed to simplify system configuration using a PC. Instead of tuning small potentiometers and switches, Sun's Amplifier Set Up Software allows you to set and monitor parameters with common terms and standard units.
- Publisher: Sun Hydraulics Corporation
- Last updated: January 16th, 2012
North American Tool has created Thread Mill Application Software that works in conjunction with your CNC machine controller. This software generates the helical interpolation for the CNC program (in G-code) necessary to run your thread mills. Just enter the basic thread parameters, then follow the computer instructions.
- Publisher: North American Tool
- Home page: www.natool.com
- Last updated: April 17th, 2010
BDLCAM allows you to control various video conferencing cameras and other USB/serial devices either locally or via the web. The current public version (3.4.0) does not stream the video, but there several programs available that take care of that. All the cameras/devices supported are controlled via serial/rs232.
- Publisher: BDLHOME
- Home page: www.bdlcam.com
- Last updated: January 16th, 2010
Krinnicam is a remote shutter controller for Nikon Coolpixes (885, 995, 4300, 4500, 5000, 5400, 5600, 5700, 7600, 8400, 8700, 8800). Supports USB and serial cables.
Easy to use interface , just select your Camera model and then choose the location of the camera on your hardware.
- Publisher: aristarco
- Home page: sourceforge.net
- Last updated: March 25th, 2010
Additional Cnc usb controller serial selection
The Advanced USB Port Monitor design enables users to use it with any USB device, extending beyond the lab environment to the personal workstations of USB developers and advanced USB device users.
Most users - USB hardware and software developers, advanced users - will appreciate the value and benefit of having a personal USB monitor and analyzer tool to fit their individual needs..
- Publisher: AGG Software
- Home page: www.aggsoft.com
- Last updated: September 21st, 2011
PTZ Controller is a program that allows you to control PTZ cameras. It works like PTZ keyboard or PTZ joystick on PC. It controls high speed Pan Tilt Zoom cameras with computer keyboard, mouse or joystick. It provides auxiliary panel and customized panel for sending specified Hex data to PTZ camera.
Hi-Speed USB Flash Disk Utility Prolific Edition. The USB Flash Disk Utility developed by Prolific Technology Inc. for PL-2515PRO / PL-2518 Controllers is a free and very easy to use and install software. The utility is also backward compatible with PL-2515 Controllers
- Publisher: Prolific Technology Inc.
- Home page: www.prolific.com.tw
- Last updated: March 10th, 2008
Connect any USB device over a local area network or the Internet with USB to Ethernet Connector. It lets you share any USB device that is located on a remote PC over a LAN/WAN/VLAN/VPN or Internet and use it as if it was plugged into your own PC.
- Publisher: Eltima Software
- Home page: www.eltima.com
- Last updated: March 23rd, 2008
Free Serial Port Terminal provides you with a visual means of sending and receiving data through your serial ports. The program lets you choose what port you want to monitor, allowing you to open and close it manually. It also includes a big box where all the transmit/receive data and all the messages are displayed with the same look and feel of Microsoft Windows HyperTerminal utility.
- Publisher: joku.lt
- Last updated: December 6th, 2009
USB 16 Servo Controller is ideal for making PC based systems which run over Hobby Servo motors. The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system. The compact module measures just 80 mm X 47 mm, and it offers both USB and asynchronous serial (UART) connectivity.
- Publisher: Robokits
- Home page: robokits.co.in
- Last updated: April 27th, 2012
Laplink Gold 22.214.171.124 (Laplink 2008) is a program that allows remote control and file transfer between PCs.
The program allows you to connect with a remote computer using any available connection: a modem, dial-up networking, a Local Area Network, Internet, or an USB or Serial Cable.
- Publisher: Laplink Software, Inc.
- Home page: www.laplink.com
- Last updated: September 19th, 2010
N1MM Logger is a contest logging application. For CW, phone and digital modes, its combination of contest-optimized features is unmatched.
- SO2R/SO2V support
- Telnet and packet support - spots from both automatically update the bandmaps.
- Winkeyer support
- Automatic beam heading and sunrise/sunset calculations.
- Publisher: N1MM Logger
- Home page: www.n1mm.com
- Last updated: January 29th, 2013
LanSafe is power protection software that provides UPS monitoring, control and preventive measures against power problems that affect computer networks and equipment. Together with Eaton UPS products, computer network systems protected by LanSafe software are more reliable and less prone to downtime and data corruption.
- Publisher: Eaton Corporation
- Last updated: September 4th, 2010
USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. The program displays the device name/description, device type, serial number (for mass storage devices), the date/time that device was added, VendorID and ProductID.
- Publisher: NirSoft Freeware
- Last updated: December 16th, 2014