Sort by: Relevance
Cor repeater controller circuits in Title/Summary
This interactive computer program consists of several circuit analysis activities. Realistic troubleshooting activities are also included involving resistors, capacitors, inductors and transformers.
AC Circuits Challenge consists of a set of fourteen activities to assist instruction of AC circuit analysis and troubleshooting.
- Publisher: ETCAI Products
- Home page: www.etcai.com
- Last updated: April 5th, 2011
This is the demo of a detailed troubleshooting training program. It lets you give a glance to the wealth of information contained in the full version of the program. You will get familiarized with the tools and troubleshooting mechanisms, and even be able to try to troubleshoot a circuit. A good learning tool.
- Publisher: Simutech Multimedia Inc.
- Last updated: June 5th, 2011
Time Circuits is a little desktop utility to show the calendar appointments. Graphical Style is a tribute to "Back to The Future" trilogy. Time Circuits is easy to use and has a friendly interface and also is free to download and use. Time Circuits is a nice tool to help you remind your appointments.
- Publisher: by Giorgio Ennas
- Home page: rotor.di.unipi.it
- Last updated: November 23rd, 2011
Cor repeater controller circuits in Description
AnadigmDesigner® take the design process to an even higher level of abstraction, fully automating the construction of common filter types and "proportional, integral, derivative" controller circuits.
AnadigmDesigner® includes a time domain functional simulator which provides a convenient way to assess your circuit's behavior without the need for a lab set-up.
- Publisher: Anadigm
- Home page: www.anadigm.com
- Last updated: November 23rd, 2011
The RLC-5 communications controller supports 2 radio ports which can each control a repeater or a link. The radio ports can be configured to require one of several combinations of COR and PL inputs for access. The RLC-5 has a DTMF decoder per radio port and one for the autopatch, thereby supporting DTMF control from all ports of the controller.
- Publisher: Repeater Controller
- Last updated: May 22nd, 2012
PicoSoft was especially created to help hardware developers build circuits diagrams for Pico controllers. The program is also able to simulate these diagrams in order to find possible errors and calculate controller output. It includes a quite large library of Pico controllers and additional expansion circuits which you can afterward connect to your computer through a COM port.
- Publisher: Moeller GmbH, Rockwell Automation Inc.
- Last updated: May 11th, 2008
EchoStation is a repeater-control program for Windows which makes it easy to set up a complete, fully-functional repeater or "announcement machine" using a personal computer.
EchoStation is perfect for portable and emergency use, or for clubs wishing to use a PC instead of specialized hardware to control a repeater.
The Multiple Link Controller is programmed using GUI based screen menus. By clicking on the connection point, links can be established based on either NAC code, CTCSS, DTMF or COR steering. For each transmitter column a priority can be set based on the received signal to give high priority to a single receiver. Channel selection may be set for any link using NAC or CTCSS tones.
- Publisher: Daniels Electronics Ltd.
- Home page: www.danelec.com
- Last updated: November 22nd, 2011
Additional Cor repeater controller circuits selection
Demo Programming Software for the RI-1 and RI-300/310. The demo allows you to work every aspect of the program but will not allow communication with the controller or saving of data files. The RI-1 is a full featured repeater controller that can be customized for your application. Hang time, time out timer, courtesy tones and CW ID interval are all programmable.
Native Instruments Controller Editor turns your Native Instruments hardware controller into a versatile and efficient MIDI remote control for your studio and live setup. The application allows you to precisely define and customize which MIDI message to send when using your NI controller.
Vidalia lets you start and stop Tor, see how much bandwidth you are consuming, see how many circuits you currently have active, see where these circuits are connected on a global map, view messages from Tor about its progress and current state, and let you configure your Tor client, bridge, or relay with a simple interface.
- Publisher: Tor Project
- Last updated: July 21st, 2011
PSIM is a power electronics circuit simulation package. It is ideal for simulating motor drives with digital control, renewable energy conversion, etc. You can use simple blocks such as PID Controller, Low Pass Filter, ABC to DQ0 transformation, Logical AND/OR/NOT, etc. to design the control system.
Tina is a program for circuit simulation and PCB design. You can use it for analyzing, designing, and real time testing of analog, digital, HDL, MCU, and mixed electronic circuits and their PCB layouts. You can also analyze SMPS, RF, communication, and optoelectronic circuits; generate and debug microcontroller code.
- Publisher: DesignSoft Inc.
- Home page: www.tina.com
- Last updated: November 11th, 2015
The Cutting Plotter Controller is a software program that lets you perform settings at your computer instead of having to make them at the plotter's control panel. In particular, frequently-used cutting condition settings and complicated registration mark reading procedures can be easily performed. Using the Controller together with the driver further improves overall operating efficiency.
Using Pocket Controller Pro V6, you can connect to any Windows Mobile device and control it from your desktop computer. Once you're controlling your mobile device from your desktop or laptop, projection equipment can be used to present your mobile device to a large group of people.
- Publisher: SOTI Inc.
- Last updated: June 17th, 2008
CNC motion controller is a link between personal computer and drivers for stepper or servo motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).
Grbl Controller is designed to send GCode to CNC machines, such as 3D milling machines. It isn’t super smart, it just needs to give the user a nice way to get commands down to whatever controller they are using. Qt is pretty cool because you can create a nice GUI application for Windows, Mac and Linux.
- Publisher: Zapmaker
- Home page: zapmaker.org
- Last updated: June 27th, 2014
Pocket Controller Pro allows you to operate and control a Pocket PC, Smartphone or any other Windows CE based mobile device from your computer, using your computer's keyboard and mouse to control the device and interact with programs running on it.
- Publisher: SOTI Inc.
- Home page: www.soti.net
- Last updated: July 25th, 2008