Design of t beam using concise beam in Title/Summary
Concise Beam is an easy to use program for the design of precast concrete beams. Concise Beam will perform a load analysis and design checks in accordance with the latest edition of ACI 318, CSA A23.3 & S6, AS3600, or NZ3101.1. Key code parameters can be customized to simulate other design codes.
- Publisher: Black Mint Software, Inc.
- Home page: www.blackmint.com
- Last updated: January 25th, 2012
LRFD Prestressed Beam is a program that designs simple span prestressed beams such as Florida-I, AASHTO, Florida Bulb-T, Florida-U, Florida Double-T, Flat Slab, Inverted-T) in accordance with the AASHTO LRFD Bridge Specification that you use for your project
This software program provides complete analysis of deflection and stresses caused by direct forces on simply supported beams. Its intuitive interface enables immediate productivity, while more advanced features allow great flexibility in problem definition.
- Publisher: IMSI/Design LLC
- Home page: www.idx-design.com
- Last updated: February 21st, 2012
Design of t beam using concise beam in Description
ProSteel 5's options include design and checking of simply supported beams, column design and checking, analysis of openings in beam webs and simple connection design.
- Steel beam design and checking to BS5950-1:2000
- Column design and checking to BS5950-1:2000
- Publisher: Greentram Software Pty Ltd
- Home page: www.superbeam.co.uk
- Last updated: November 23rd, 2011
RISAMasonry offers a complete answer for analysis and design of masonry construction. RISAMasonry designs masonry walls, columns and beams (lintels) to the latest codes and includes a library of masonry units. The program addresses the working stress design of beams, columns and both in-plane and out-of-plane walls. The program designs slender walls using the iterative strength design method.
- Publisher: RISA Technologies
- Home page: www.risatech.com
- Last updated: November 29th, 2009
StruCalc is the next generation of structural analysis software. The intuitive interface combined with the power to design multiple span members using steel, wood, flitch beams or manufactured lumber propels StruCalc ahead of the competition. It has a fully customizable database.
- Publisher: StruCalc, Inc.
- Home page: www.strucalc.com
- Last updated: May 21st, 2012
With SuperBeam you can check or design steel and timber beams in minutes, saving you time and money.
Key features :
- Steel beam design and checking to BS449 Part 2
- Timber and flitch beam design and checking to BS5268 Part 2
- Column design and checking to BS449, with simple base plate sizing
- Checking of timber posts and studs to BS5268 Part 2
- Publisher: Survey Design Associates Limited
- Home page: www.superbeam.co.uk
- Last updated: August 27th, 2011
ShapeDesigner is a useful tool for structural engineers, for the design or analysis of steel, aluminum, and polymeric or composite materials sections. ShapeDesigner calculates the stress distribution including normal, warping and shear stresses, the equivalent Von-Mise, principal and residual stresses.
- Publisher: MechaTools Technologies Inc
- Home page: www.mechatools.com
- Last updated: December 1st, 2010
Additional Design of t beam using concise beam selection
Concrete Beam Design designs one-way flexural members, including beams, one-way slabs and joists. This concrete design software goes beyond typical concrete beam design programs and includes beam dimensions, bar sizes, quantities, development lengths, cut off locations, stirrup spacing, deflection checks, capacity diagrams and more.
- Publisher: Digital Canal Corporation
- Home page: www.digitalcanal.com
- Last updated: December 18th, 2009
QRod's helps the beam pumping system designer to implement state-of-the-art design technology without getting buried with details. The program uses a wave equation solution to accurately predict the surface dynamometer loads, gearbox torque and pump capacity, with a minimum amount of input.
- Publisher: Echometer Company
- Last updated: December 4th, 2010
The IDX Beam Analysis Tool supplies a comprehensive analysis of the deflection and stresses caused by forces on direct single beam devices. The intuitive user interface allows an immediate increase in productivity and the same advanced features for great flexibility in defining the problem.
Wood Beam Sizing is a computer program, designed to handle the basic mathematics for calculating the load, length and positioning of wood beams in wooden houses. You can see all results and calculations and save multiple load combinations for each project.
For advanced system optimization rezonator can compute cavity stability maps versus values of one or two (contour maps) any parameters of any element. It is possible to specify arbitrary contour lines for contour stability map. Also automatical computation of stability boundaries is provided.
The purpose of this program is to support users of data of the CHRIS sensor onboard of the ESA Proba platform. It provides extensions for BEAM, which allow accomplishing the following tasks: Noise reduction: Removes the vertical striping in CHRIS response-corrected images caused by the slit effect and a superposition of high-frequency noise. Cloud screening and more.
T-Beam now integrates the latest Active-X technology in its new release.
The use of floating palettes inside AutoCAD enables the designer to have all the tools needed to create quick and accurate T-Beam layouts at the touch of the mouse. New features have also been added to enable existing architectural layouts to be quickly and easily converted into T-Beam format.
Mixte is an advanced software application for the analysis and design according το Eurocode 4 of composite road and railway bridges. It is distributed to the European market since 1997 (initial version had French design code) and has been used for the design of hundreds of road and rail bridges.
- Publisher: Computer Control Systems
- Home page: eng.ccs.gr
Beam 2D offers a much wider range of formatting options than those available in Beam II. While all Beam II text output was displayed and printed in scientific notation, Beam 2D provides choice between scientific and standard notation with various degrees of user-selected precision.
EngiLab Beam.2D ML 1.20.1104
- Publisher: EngiLab
- Last updated: April 9th, 2008