Building hvac heat load calculation in Title/Summary

BTU Analysis Plus - Demo - 32 Bit

The PLUS and REG programs are commercially distributed program and is marketed through professional organizations, trade advertisements, and word of mouth. They are designed to make difficult heating, air-conditioning, heat pump (PLUS only), and commerical studies are easy to do and understand.

• Publisher: Enchanted Tree Software

HVAC Tools

The HVAC Tools program allows the quick calculation of HVAC design tasks. These tasks include duct sizing, wire sizing, three way coil interpolation, mixed air and state point psychrometrics, fan curve and cost analysis, U-Factor calculations, natural gas pipe sizing, refrigeration line sizing and others.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: December 16th, 2014

Design Master HVAC

Design Master HVAC is an integrated HVAC building design and drafting program for AutoCAD. Features include 2D and 3D ductwork drafting, ductwork sizing, pressure drop calculations, and building load calculations.

• Publisher: Design Master Software, Inc.
• Last updated: May 26th, 2020

Building hvac heat load calculation in Description

HeatLoadCalculation

The Heat Load Calculator Program not only facilitates the process of calculating a precise heat load requirement, but also provides a recommendation for the optimal system to meet your particular needs. Tailored specifically to the market in China, the program also has the weather data of 193 major cities in Mainland China.

• Publisher: Emerson
• Home page: www.emersonclimate.com
• Last updated: November 2nd, 2010

Block Load

Carrier's Block Load program is a powerful, fully featured HVAC load estimating program suitable for commercial buildings of any size. Block Load is a tool for consulting engineers, design/build contractors, HVAC contractors, facility engineers and other professionals involved in the design, analysis or installation of commercial building HVAC systems.

• Publisher: Carrier Corporation
• Home page: www.commercial.carrier.com
• Last updated: April 19th, 2008

WUFI®

WUFI® is a software based on the newest findings regarding vapour diffusion and liquid transport in building materials. Allows realistic calculation of the transient coupled one- and twodimensional heat and moisture transport in multi-layer building components exposed to natural weather.

• Publisher: Fraunhofer-Gesellschaft
• Home page: www.WUFI-Pro.com
• Last updated: April 19th, 2011

RadiantWorks PRO

Features:-Works in Windows XP Service Pack 2, Vista (32 and 64 bit), and Windows 7 (32 and 64 bit). -Calculate heat loss for each individual room -Calculate the required water temperature needed to provide enough heat for each room in a zone -Give you a detailed heat loss report for each room and zone -Flag possible design flaws

• Publisher: Watts Radiant
• Home page: www.wattsradiant.com
• Last updated: March 27th, 2012

RoomHeat

The RoomHeat program has been developed by TechniSolve Software with the design/supply contractor in mind. We aim for easy input and a clear step by step process to the final result, plant selection. You can work with average rates or go into design fundamentals when it is warranted. All inputs have reasonable starting defaults and guide you to a good solution.

• Publisher: TechniSolve Software cc
• Home page: www.coolit.co.za
• Last updated: June 23rd, 2010

Additional Building hvac heat load calculation selection

Chvac

Chvac is a program that quickly and accurately calculates the maximum heating and cooling loads for commercial buildings. The program allows an unlimited number of rooms which can be grouped into as many as 100 air handling systems. Chvac automatically looks up all cooling load and correction factors necessary for computing loads.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: October 22nd, 2017

HAP System Design Load

In System Design Load, general load estimating and system-based design start with the basics. Access to design weather data for hundreds of cities is at your fingertips. The ability to define specific wall, roof, and window constructions. Features for defining building design, layout, and operation in as much or as little detail as necessary.

• Publisher: Carrier Corporation
• Last updated: January 27th, 2012

Daikin Altherma Simulator

The Daikin Altherma simulation software is a static calculation tool, which can be used as an indication for dimensioning Daikin Altherma heat pump systems. The software works with following assumptions. - A detailed study to calculate the heat load should be made. - The simulation is based on the assumption that heating is required 24h/24h.

• Publisher: Daikin Altherma
• Home page: www.daikinaltherma.eu
• Last updated: July 13th, 2012

DanCap

DanCap (or Danfoss Capillary Tube Selector) is a utility designed to make calculations related to a capillary tube throttling device for a refrigeration system, with empirical formulas being used for this purpose. According to the developers, the results returned by the utility are start values for optimization, values that are appropriate for the system to function.

• Publisher: Danfoss Compressors GmbH
• Last updated: June 1st, 2008

eSan Photo2PDF

Do you want to create a quick photo or image display without the complexity of a photo program? eSan Photo2PDF provides you an easy solution for creating a PDF photo album. You can print and distribute them, burn them on a CD, send them with email or publish them on Internet!

• Publisher: eSanSoft Computing Inc.
• Last updated: August 5th, 2008

BuildDesk U

Professional software for U-value calculations In just minutes BuildDesk U can help you calculate accurate U-values for a wide range of building constructions. It also provides you with specific information regarding key aspects of building physics, such as calculation of surface temperatures and a Condensation Risk Analysis.

• Publisher: BuildDesk Ltd.
• Last updated: March 27th, 2013

PeakLoad

The calculation of heat load is a complicated problem. This is partly due to the delay of the various room peak load calculatorinstantaneous heat loads on the plant but also because of the variations in loads during the 24-hour period.A solution that has been proposed to deal with the problem of a sun lit wall is to introduce a cooling load factor (CLF).

• Publisher: TechniSolve Software cc
• Last updated: December 20th, 2009

Foundation3D

Foundation3D is a spread and combined footing analysis/design tool that completes soil or pile supported foundation with minimal input. This tool is perfect for designing foundations for industrial equipment such as horizontal exchangers and vessels, vertical vessels or towers, pipe racks and other plant supports.

• Publisher: Dimensional Solutions
• Last updated: July 13th, 2012

PAROC TOP

The products are used for thermal, fire, sound, and condensation insulation, in applications within the process industry, house building (HVAC), shipbuilding industry and manufacturing machinery and equipments (OEM). The PAROC Technical insulation product range incorporates pipe sections, wire net mats, lamella mats,

• Publisher: Progman Oy
• Last updated: February 29th, 2012

Kemper Dendrit Classic

Main features: - Drinking water pipeline network calculation according to DIN 1988-3, DVGW W 551 a. W 553 incl. Simulation for circulation and KHS - Wastewater pipeline network calculation acc DIN-EN 12056 a. DIN 1986-100 - Heating: Heating load acc DIN-EN 12831, heating surface design with BDH - Cooling load calculation acc VDI 2078 with inclusion of the EN 1264 Draft

• Publisher: Dendrit Haustechnik-Software GmbH
• Last updated: September 22nd, 2011