Labview rs232 terminal program in Title/Summary

ShamCom Terminal

ShamCom is a terminal program for Telnet (TCP/IP), ISDN (CAPI 2.0) and modems (RS232). It implements scripts for automation, file transfers with Xmodem, Ymodem, Zmodem, and all common terminal emulations like TTY, VT52, VT100, ANSI. ShamCom is often used for RS232 or modem tests and mailbox communication but also as a terminal for embedded systems.

• Publisher: Shamrock Software GmbH
• Home page: www.shamrock.de
• Last updated: July 13th, 2012

BSP Terminal

You can use it for direct com port terminal connection in manual or batch modes. Configarion options supported:COM1-COM12, baudrate (9600-38400), bits (5-8), parity (none, odd, even), stop bits (1,2), flow control (none, software, hardware). It is extremely usefull for programming network devices that support serial connection.

• Publisher: Olexiy Merenkov
• Last updated: February 5th, 2010

Q Serial Terminal

Q Serial Terminal is an open source QT-based serial terminal program. The program can be used with embedded systems. It implements a terminal program using QT and the QExtSerialPort library. It also mixes the input and output into one terminal window.

• Publisher: Blake Leverett
• Home page: sourceforge.net
• Last updated: January 23rd, 2014

Labview rs232 terminal program in Description

RS232 Hex Com Tool

Hex Com Tool is a serial software terminal program that can be used to communicate with just about any rs232 peripheral. This reliable serial software program is great for embedded developers and it can transmit and receive serial data in Hex or ASCII. RS232 Hex Com Tool is a rs232 setup data can be saved for multiple peripherals and later retrieved for easy setup of each individual device.

• Publisher: Virtual Integrated Design
• Last updated: May 7th, 2008

Docklight Scripting

Docklight Scripting IoT terminal is an extended edition of the Docklight RS232 Terminal / RS232 Monitor. It can establish TCP connections (TCP client mode), accept a TCP connection on a local port (TCP server mode), or act as a UDP peer IoT terminal.

• Publisher: Flachmann & Heggelbacher
• Last updated: January 27th, 2018

EzCom2Web

Lightweight HTTP server and a script engine (like PHP or ASP) in one application . It is a very good tool to control a device connected on a remote PC serial port with a web browser. You can build a complete web interface for your RS232 device.

• Publisher: Cosmin Buhu
• Home page: TheByteWorks.com
• Last updated: December 20th, 2009

Docklight

Docklight is a program that allows users to manage the communication between serial devices, which is quite useful when having to generate test conditions that are very hard to reproduce with the original device. It has the capacity to perform serial port tests, automate sequences, and diagnose problems.

• Publisher: Flachmann und Heggelbacher GbR
• Home page: docklight.de
• Last updated: April 5th, 2023

Digiquartz® Terminal

Digiquartz® Terminal (DQT) is a Windows®-based terminal program, designed to communicate with the Digiquartz® Intelligent Instruments via the existing command set. Any terminal program can be used to communicate with Digiquartz® Intelligent Instruments. Some of these terminal programs may require detailed configuration to be able to communicate with Paroscientific Intelligent Instruments.

• Publisher: Paroscientific, Inc.
• Last updated: October 18th, 2011

Additional Labview rs232 terminal program selection

Realterm

Realterm is a terminal program specially designed for capturing, controlling and debugging binary and other difficult data streams.Main Features:- Serial Ports, USB Serial and TCP/IP & Telnet - I2C, SPI, 1Wire chip control via BL233 / I2C2PC - Binary viewed as hex, 8 bit, 16 bit, little/big ndian, signed, unsigned, float, special fonts - Fullscreen,MiniTerminal, Screen Scaling, Global Hotkeys

• Publisher: Simon Bridger
• Last updated: September 16th, 2016

Termite

Termite is a simple RS232 terminal, which uses an interface similar to that of "messenger" or "chat" programs. It comes with a large window that displays all received data and an edit line for typing in strings to transmit. Unlike other tools, it uses a heuristic search for selecting an appropriate COM port.

• Publisher: CompuPhase
• Home page: www.compuphase.com
• Last updated: October 5th, 2015

CwType

The terminal program for CW-operators. You can transmit both from the keyboard and from a paddle connected to serial, game or LPT port. You can also operate in paddle iambic mode. Control of the transceiver (PTT and CW keying) is made through one of the COM or LPT ports. CwType can integrate with AALog software.

• Publisher: Max Zuber
• Home page: www.dxsoft.com
• Last updated: September 7th, 2017

LCARS Terminal

It will change your Windows computer into a LCARS Terminal like on the U.S.S. Enterprise E. With this program you can give your windows computer the look and feel of a LCARS Terminal screen and it is possible to copy files, explore your harddisks, browse the internet, use the control panel, configure your soundcard.

• Publisher: Piet van Stralen
• Home page: www.lcars-terminal.net
• Last updated: October 15th, 2012

AALog

It has convenient interface, a good set of tools, and is fast and very easy to use. It looks like your good old paper logbook and the has benefits of a computer logger. It can be integrated with the CW terminal program CwType, morse decoder CwGet and RTTY/PSK31 software TrueTT

• Publisher: Alexander Anipkin
• Home page: www.dxsoft.com
• Last updated: May 27th, 2020

SmartMotor Interface

SmartMotor Interface (SMI) Software for programming all SmartMotorsAnimatics’ SMI software provides an easy-to-use Microsoft Windows-compatible interface to your Animatics SmartMotor. Using SMI, you can define multi-axis motion control for 1 to 100 SmartMotors. SMI includes a terminal program, program editor, and source level debugger.

• Publisher: Animatics Corporation
• Last updated: March 24th, 2010

DeTransfer

DeTransfer is a free-to-use text based terminal program for programming and viewing data from any dataTaker data logger. Note that DeTransfer connections and other configurations will be managed separately for each user. Pre-requisite: Knowledge of dataTaker programming language.

• Publisher: dataTaker
• Last updated: March 22nd, 2010

STP

STP is the tool for configuring and monitoring the Lukas, SIR and SAS220 products. Streamit’s device portal makes it possible to configure the presets of a Lukas II remotely. Programming the Lukas II is done via a USB cable and the Streamit Terminal Program.

• Publisher: Streamit
• Last updated: March 31st, 2015

ComTool

The COMTool is an easy to use serial communication terminal program that transmits and receives bytes to practically any device connected to a PC's COM port. Some of the COMTool features include: - Transmits and receives data in either HEX or ASCII format.

• Publisher: U.S. Digital
• Last updated: March 19th, 2012

APRS Messenger

The APRS Messenger program provides a simple way to send and receive APRS messages from an APRS TNC Digi Tracker on VHF and by APRS over PSK, QPSK and GMSK modes on HF.Main features: -Serial terminal program to setup APRS TNC Digi Tracker -APRS over PSK, QPSK and GMSK modes for high performance HF APRS using the PC soundcard.

• Publisher: Cross Country Wireless (2009) Ltd
• Home page: www.crosscountrywireless.net
• Last updated: April 6th, 2012