Riff box firmware version 1.35 in Title/Summary
RIFF Box JTAG Manager is a free program that enables you to configure the RIFF JTAG Box. The program has firmware support for devices such as ARM7/ARM9/ARM11 PXA3xx, PXA270, Cortex-A8, OMAP850 and Cortex-A9 Dual cores. You can program code breakpoints and customize voltage levels.
- Publisher: RIFF JTAG
- Home page: www.riffbox.org
- Last updated: July 6th, 2014
Riff Workspace: a free application used to download, categorize, organize and view the interactive lessons. See the installation directions below.
After it is installed, start the Riff Workspace application by double-clicking the icon. You can then download lessons for an order placed using this button:
Medusa Box Flasher is an utility that allows users to re-write the firmware on their mobile device or perform phone repair operations. With this program you can repair IMEI, unlock, read Boot/Flash, write Boot/Flash, erase Boot/Flash, repair Boot/Flash, and more.
- Publisher: Medusa team
- Home page: medusabox.com
- Last updated: March 31st, 2015
Riff box firmware version 1.35 in Description
AVM FRITZ!Box Child Protection is a service on your computer. The service informs the FRITZ!box of the name of the Windows user currently accessing the Internet.
All of FRITZ!Box Child Protection's settings are made in the user interface of your FRITZ!Box (http://fritz.box).The online help provides a detailed description of the functionality.
- Publisher: AVM Berlin
- Last updated: April 26th, 2012
Service Tool is a simple and handy tool used to service, diagnose, tune and activate different features on MSS Box II.
This software comes free with any MSS Box II.
It features the universal box mode - virtual com port emulation with configurable parameters.
- Publisher: MSSBox.com
- Home page: www.mssbox.com
- Last updated: March 17th, 2010
EOSInfo is the successor to the 40DShutterCount utility. It is called EOSInfo since it provides more information about the camera that might be handy, including firmware version, date/time, and owner/artist/copyright strings and works on a wider variety of cameras than just the 40D*.
- Publisher: astrojargon.net
- Home page: astrojargon.net
- Last updated: August 4th, 2009
RegDllView is a small utility that displays the list of all registered dll/ocx/exe files (COM registration). For each registered file, you can view the last date/time that it was registered, and the list of all registration entries (CLSID/ProgID).
RegDllView also allows you to unregister dll/ocx files that you don't need on your system anymore.
- Publisher: NirSoft
- Last updated: October 16th, 2011
The Download Firmware Upgrade Utility (DLF3000) is a tool used to install the latest firmware version for your POWERLOGIC or POWERLINK device. This free software application is easy to install, easy to use and has a friendly user interface. You just need to upload the latest version and this tool will make the upgrade.
- Publisher: Schneider Electric
- Home page: www.powerlogic.com
- Last updated: April 16th, 2012
Additional Riff box firmware version 1.35 selection
HD Tune 2.54 is a utility to measure your hard disks´ performance.
It shows detailed information about the health status, errors and temperature of your hard disks.
It also works with other storage devices such as memory cards, USB sticks, iPods, etc.
- Publisher: EFD Software
- Home page: www.hdtune.com
- Last updated: September 8th, 2011
Logitech Unifying software lets you manage the devices that use a Unifying receiver. The advanced mode displays the status of your paired devices, battery level and firmware version. You can add or remove devices using the program wizard or the advanced mode.
- Publisher: Logitech
- Home page: www.logitech.com
- Last updated: October 20th, 2012
HDD Health is a system utility that monitors your hard disk health status constantly. The program reads the S.M.A.R.T. information available in all modern hard disks to determine their health status. Thanks to this information, HDD Health can foresee any upcoming disk failure and warn you about it, so that you can back up your critical information and avoid any data loss.
- Publisher: PANTERASoft
- Home page: panterasoft.com
- Last updated: June 10th, 2012
This tool allows users to secure Logix5000 controllers. This enhanced version allows for Logix5000 the secured state to be saved in the controller's Nonvolatile Storage (NVS) memory. This functionality requires Logix5000 firmware version 15 or later.
PlexUTILITIES is an advanced application and diagnostic tool provides an extra support for your drive. This intuitive tool is easy enough for newcomers, yet powerful enough for professional users. Viewing Basic and Advanced Drive Information which lists the drive’s hardware, including serial number, firmware version and jumper settings, and shows the capabilities of the drive.
- Publisher: Plextor
- Last updated: January 16th, 2013
SUT LR is a free program that enables you to update your Android phone to the latest firmware version. You can connect your Android device to your computer, select the image file that contains the update and the application will run and install the components.
The SSD Toolkit helps SanDisk SSD users maintain peak performance of their SanDisk SSD(s) under various Windows® operating systems with an easy-to-use graphical user interface. The SSD Toolkit includes tools for analysis of the drive (including drive model, capacity, firmware version, and SMART attributes) and firmware updates.
- Publisher: SanDisk Corporation
- Home page: kb.sandisk.com
- Last updated: May 27th, 2012
SanDisk SSD Dashboard is a program that helps SanDisk SSD users maintain peak performance of their SanDisk SSD(s) under various Windows operating systems. The SanDisk SSD Dashboard includes tools for analysis of the drive (including drive model, capacity, firmware version and SMART attributes) and firmware updates.
- Publisher: SanDisk Corporation
- Home page: kb.sandisk.com
- Last updated: August 10th, 2015
CorobSHOP is one of the operator interface application programs for managing a Corob automatic dispenser.
CorobSHOP not only manages the dispenser, but offers the user with a series of services and features that make it a complete, flexible tool.
CorobSHOP also offers all functions necessary for daily maintenance of the dispenser and to manage the level of colorants in the canisters.
- Publisher: Corob S.p.A. Via dell'Agricoltura 103, S. Felice S.P. Modena, Italy
- Last updated: September 11th, 2012
SuperDrive G2 is an app designed for parameter setup, command and monitoring of WEG drives. The program features command operations like motor start/stop, jog forward/reverse, local/remote, etc and supports multiple databases for standard and special firmware version. Also, it supports configuration, importing and viewing of variables stored through trace function on CTW900, CFW11 and SCA06.
- Publisher: WEG
- Home page: www.weg.net
- Last updated: January 23rd, 2016