License: All

Sort by: Relevance

Bridging usb over ethernet in Title/Summary

USB Over Ethernet

New software solution allowing you to use remote USB devices as if they are plugged into your own PC. Share your USB devices and access remote devices without leaving your place!

Publisher: KernelPro Software
Home page: www.usb-over-ethernet.com
Last updated: July 29th, 2020

When attached to a device with USB over Ethernet Connector, it's like you were working with equipment plugged into your local PC. The software lets you work with a USB device over Ethernet and get the same functionality as a direct connection.

Publisher: Electronic Team, Inc.
Home page: www.usb-over-ethernet.org
Last updated: May 3rd, 2020

USB to Ethernet Connector

Connect any USB device over a local area network or the Internet with USB to Ethernet Connector. It lets you share any USB device that is located on a remote PC over a LAN/WAN/VLAN/VPN or Internet and use it as if it was plugged into your own PC.

Publisher: Eltima Software
Home page: www.eltima.com
Last updated: March 23rd, 2008

Bridging usb over ethernet in Description

Celsius 2007

CELSIUS is a computer program for the programming, control and logging of MEMMERT ovens with an RS-232, or alternatively RS-485, USB or Ethernet interface. With CELSIUS, you can create, change and save tempering profiles on your computer in graphical or tabular form.

Publisher: Memmert GmbH + Co. KG
Last updated: October 27th, 2011

KernelPro USB Over Ethernet

USB over Ethernet is a professional tool that allows users to work with USB devices remotely over IP. You can connect to a shared USB device and use it just like it is plugged in your machine. Server and Client parts are installed on the same computer.

Publisher: KernelPro Software
Home page: www.kernelpro.com
Last updated: December 10th, 2014

SRP-350II POS Software Package

SRP-350II POS Software Package is a powerful tool which integrates the most important options to configure your printer options. First of all, you can manage your communication settings by choose the printer, printer interface such as Serial, Parallel, USB or Ethernet, communication speed if the interface is serial or IP address and port number if the interface is Ethernet.

Publisher: BIXOLON
Last updated: May 14th, 2011

LadderComOp

This application is required for PLC ladder transfer via USB or Ethernet. When a V8 series is connected to the CPU port of a PLC, debugging has to be carried out by disconnecting and reconnecting two cables alternately: the cable that connects the PC to the PLC and the cable that connects the V8 series and the PLC.

Publisher: Hakko Electronics Co., Ltd.
Last updated: December 20th, 2019

USW30 Light Edition

The USW 30 Light Edition software is a PC program for (remote) configuration of one or more UFO®compact headend systems. For this purpose, a UFO®compact system is a unit comprising one UFO®compact controller, a demultiplexer and the channel units controlled by it. The software is implemented in JAVA and therefore is available on many different operating systems.

Publisher: Kathrein-Werke KG, Rosenheim
Home page: www.kathrein.de
Last updated: November 16th, 2011

Additional Bridging usb over ethernet selection

NovAtel Connect

NovAtel Connect is a windows-based GUI that allows you to access your receiver’s many features without the need to use a terminal emulator or to write special apps. It lets you easily communicate and configure your receiver via serial port, USB or ethernet connection using a PC.

Publisher: NovAtel Inc.
Last updated: May 18th, 2020

TiF454

TiF454 is configuration software for Web Server F45 through USB or Ethernet ports. Web Server F454 is home automation controller hardware from the developer. It can be used to configure various components like lighting, alarm, CCTV, etc. Energy management settings are also available in the application.

Publisher: BTicino
Last updated: August 1st, 2013

Comfigurator

Comfigurator is designed to allow the installer to program the Comfort Security and Home Automation system. It provides an easy to use interface for configuring all aspects of the system, and includes a Response Wizard to enable Responses to be programmed without the need for low level programming knowledge.

Publisher: Cytech Technology Pte
Home page: www.cytech.biz
Last updated: November 23rd, 2012

Cleverscope

Cleverscope is a PC based mixed signal oscilloscope, spectrum analyzer and signal generator. The signal is captured by the Cleverscope Acquisition Unit that connects via USB or Ethernet connection to a local PC. The Scope contains the normal waveform display with an information panel, plus the option for displaying up 8 to digital inputs.

Publisher: Cleverscope Ltd.
Home page: www.cleverscope.com
Last updated: May 3rd, 2023

Daslight DVC1

Daslight DVC1 is a DMX (Digital Multiplex) lighting software. It requires a Daslight USB or Ethernet interface to be connected to convert the control data from the software to DMX which the lights can understand. This package works with DVC controllers; they come with standalone memory, which can be programmed by Daslight.

Publisher: Daslight
Home page: www.daslight.com
Last updated: May 3rd, 2016

PCView

PCView is a windows application for controlling radio navigation receivers. PCView provides way to connect a JNS receiver and a computer via serial, parallel, USB or Ethernet ports for tracking of the total number and the status of all visible satellites or displaying the receiver’s current position and time in real time.

Publisher: Javad Navigation Systems
Last updated: April 3rd, 2010

RiyaShowToSD

RiyaShowToSD is a program which allows you to: - load ILDA files (with palette choice); - preview ILDA files on screen; - translation ILDA files to laser projector; - upload laser shows to SD card (with scanrate choice) (64 banks*64 shows) These operations can be done by USB or Ethernet interfaces

Publisher: Riya
Last updated: January 26th, 2012

Siprom GA

SIPROM GA is a program that allows communication between a PC or a laptop and compatible analyzers. A maximum of twelve devices (electronics module) of the following type can be connected: - OXYMAT 6 / 61 / 64 - ULTRAMAT 6 / 23 - CALOMAT 6 / 62 - FIDAMAT 6 The coupling between the PC/laptop and the analyzers is made by an interface converter from RS 485 to RS 232, USB or Ethernet adapter.

Publisher: Siemens AG
Last updated: March 9th, 2016

DatabICS

Easily set up and manage your article database on your computer instead of manually entering all the data on the scale. To configure multiple scales, set the scale settings (user rights, soft keys, user prompting, etc.) on your computer and apply them via USB or Ethernet. Continuously monitor your processes by easily downloading weighing and counting data for statistical analysis.

Publisher: Mettler-Toledo International Inc.
Home page: sg.mt.com
Last updated: January 23rd, 2015

Wizcomfort

WizComfort User Interface for Comfort. Requires a UCM/USB, UCM/Ethernet or UCM/232. In Setup > Options > Files tab the Config file location should be the location of your ccl file which has been downloaded to your system. This allows WiZcomfort to extract all the information about inputs, outputs, ucms etc that is set up in Comfort

Publisher: Cytech Technology Pte Ltd
Home page: www.cytech.biz