8051 low cost usb programmer in Title/Summary
The KDI Universal Programmer 3.0 is a professional low cost parallel programmer, covering most of the classic and mega AVR 8-bit RISC microcontrollers, both I2C and Microwire serial EEPROMs and also MCS-51 family of Atmel corporation. The programmer connects to the PC through a standard parallel port and programs the supported chips via a very user friendly software.
- Publisher: KDI
Use the USB Programmer Module to quickly setup thermostats using your computer or by transferring another thermostat's settings. This unique accessory allows the installer to copy stored information from a thermostat, which can then be loaded into other thermostats without the need to manually configure each setting.
- Publisher: source1thermostats
- Last updated: July 17th, 2018
GQ USB Programmer is an application that lets you burn HEX files to microcontrollers using GQ programming devices. The microcontroller can be automatically determined by the program. The devices supported depend on the programmer hardware connected to PC.
- Publisher: MCUmall Electronics Inc.
- Home page: www.mcumall.com
- Last updated: June 28th, 2015
8051 low cost usb programmer in Description
eXtreme Burner PIC is a high quality but low cost USB port based programmer for the popular PIC18F and PIC16F series MCUs. Main features: - In Circuit Serial Programming (ICSP) support. - Supports All PIC18F ( and PIC18LF) chips - More than 45 devices. - Supports Selected PIC16F (and PIC16LF). - High Voltage Programming Support.
- Publisher: eXtreme Electronics, India
- Last updated: September 1st, 2014
Ember’s InSight USB Link is a low-cost FLASH programming device used with the EM250 and EM260 family of RF transceivers. The programmer connects to any PC via USB and to Ember’s Radio Control Module (RCM) via a 10-pin cable with keyed connector.USB Link kit includes the plug-and-play USB programmer hardware and easy to use software tools that read and write customer applications.
- Publisher: Ember Inc.
- Last updated: December 3rd, 2010
The Enhanced BDM Programmer provides a fast, efficient, low-cost method of programming the on-chip Flash and EEPROM memory of our 68HC12 and HCS12 Families utilizing the BDM interface. The programmer can be used standalone with a simple pushbutton and LED interface. Direct replacement for the SCBDMPGMR12 BDM programmer.
- Publisher: Freescale Semiconductor
- Home page: www.freescale.com
- Last updated: December 28th, 2011
The PIC18 Starter Kit functions as a USB mouse, joystick or mass storage device all using the on-board capacitive touch sense pads. It includes a MicroSD™ memory card, potentiometer, acceleration sensor, and OLED display. With on-board debugger and programming, and USB power, the starter kit is a low-cost way to get started with the PIC18 family.
- Publisher: Microchip Technology Inc.
- Home page: www.microchip.com
- Last updated: October 21st, 2011
With Microchip’s powerful MPLAB Integrated Development Environment (IDE) the PICkit™ 2 enables in-circuit debugging on most PIC® microcontrollers. In-Circuit-Debugging runs, halts and single steps the program while the PIC microcontroller is embedded in the application. When halted at a breakpoint, the file registers can be examined and modified.
- Publisher: Microchip
- Home page: www.microchip.com
- Last updated: January 31st, 2012
Additional 8051 low cost usb programmer selection
Robokits AVR USB Programmer is an application that can program AVR devices in the STK500V2(HID Mode) and STK500(CDC Mode) modes. It provides all the necessary functions like read, write, lock, and fuse settings. It is compatible with AVR Studio, AVRDUDE, and compilers that support STK500 or STK500V2 protocols.
- Publisher: ROBOKITS INDIA
- Last updated: April 29th, 2012
The user can add new devices and actions using pascal scripts Over write or insert mode; Support hexadecimal, decimal, octal and binary systems; File size up to 2GB (depends on the virtual memory of the computer); Print the whole file or selected part of it
- Publisher: ELRASOFT
- Home page: www.elrasoft.com
- Last updated: August 8th, 2012
FreeCall is a client for making VoIP calls. The term VoIP (voice over IP) makes reference to communication protocols and technologies involved in supporting voice communications that are performed over IP (Internet Protocol) networks, like the Internet. In order to install the utility, you need to make a user account first. A bandwidth test will then be performed, as well as sound device tests.
- Publisher: Dellmont Sarl
- Home page: www.freecall.com
- Last updated: March 31st, 2015
BASCOM AVR is a very powerful and easy-to-use compiler for the AVR series of micro controllers developed by Atmel. The program comes with a very user-friendly interface and a set of simple commands, and provides more flexibility than other programs in this category.
- Publisher: MCS Electronics
- Last updated: December 15th, 2016
Flash Drive Tester is a flash card/drive tester that allows testing of any removable media including SD, MMC, CF, USB flash pen drives for bad or unstable sectors. The program is useful specially for testing for fake sizes often seen on low quality USB pen drives.
- Publisher: Virtual Console
- Home page: www.vconsole.com
- Last updated: October 9th, 2008
MOOS Project Viewer is a cost-effective, alternate viewer that may be used to open and view any Microsoft Project file. It is a viewer only. However, it has the great advantage of not needing MS Project to be installed (in full or a component) to work correctly. It runs on all Windows versions, 32/64 bit apart from Mac OS X & Linux. License is per user and not per computer.
- Publisher: Stand By Soft
- Home page: www.moosprojectviewer.com
- Last updated: April 2nd, 2012
SparkTrust PC Cleaner Plus deeply scans your PC in search not only of unnecessary junk files but also of malicious software that might compromise your security. Its thorough scan process will detect all system issues, privacy issues, junk files, malware programs, viruses, and software-related issues that may be harming your PC’s performance or taking up valuable space.
- Publisher: SparkTrust Systems
- Last updated: October 20th, 2017
Making Internet phone calls, often referred to as PC to Phone calls allows you to make low cost calls to any phone number in the world from any country in the world. A PC to Phone Dialer from iConnectHere offers some of the lowest rates in the world for both international and domestic calling.
- Publisher: deltathree Inc.
- Home page: www.iConnectHere.com
- Last updated: June 19th, 2012
Use the Internet to make free long distance phone calls.
- Publisher: S-unno
- Home page: www.s-unno.com
- Last updated: July 16th, 2012
123D Make lets you turn 3D models into 2D build plans with animated assembly instructions. It lets you turn any 3D model into a real-world object. The app allows you to view interactive assembly instructions, preview in a variety of materials ( including cardboard, acrylic, and more), and includes multiple build techniques.
- Publisher: Autodesk
- Home page: www.autodesk.com
- Last updated: October 15th, 2015