Podnova Player  Windows library  Podnova home
Multimedia | Business | Messengers | Desktop | Development | Education | Games | Graphics | Home | Networking | Security | Servers | Utilities | Web Dev | Other
License: All
Sort by: Relevance

Atheros l2 ethernet controller in Title/Summary

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller is a free-to-use driver for Atheros network card. This easy-to-install driver is recomended only for Windows XP.

  • Publisher: Atheros Communications Inc.
  • Last updated: November 14th, 2012
Atheros Communications Inc. AR81Family GigabitFast Ethernet Driver

Atheros Communications Inc. AR81Family GigabitFast Ethernet Driver

Atheros Communications AR81Family Gigabit/Fast Ethernet Driver for Microsoft Windows 7 (32-bit, 64-bit) - Lenovo G475,G575

  • Publisher: Atheros Communications Inc.
  • Home page: www.qca.qualcomm.com
  • Last updated: October 24th, 2024
Fatek Ethernet Module Configuration tool

Fatek Ethernet Module Configuration tool

Fatek Ethernet Module Configuration tool helps you configure Ethernet module. This software is a windows-based software and has following functions: Basic module Information setup - Includes IP (Network address), gateway, netmask, baud rate, operating mode, module name, module description.

  • Publisher: Fatek Automation Corp.
  • Last updated: October 25th, 2012

Atheros l2 ethernet controller in Description

Opto 22 FactoryFloor

Opto 22 FactoryFloor

If using an M4-series controller with M4SENET-100 Ethernet adapter card, must have Ethernet capability. Must also have an RS-232 serial port and serial cable for downloading firmware updates to a controller. Microsoft Windows XP or Windows 2000® workstation operating system with the most recent service packs.

  • Publisher: Opto 22
  • Last updated: December 6th, 2009
PLANET WL-U357

PLANET WL-U357

The Atheros Client Utility (ACU) is a user-mode utility designed to edit and add profiles for, as well as display and diagnostics pertaining to a selected Atheros network interface card (wireless adapter). System Requirements Laptop/ PC containing: - 32-bit CardBus slot (or Desktop PC with PC Card-PCI adapter) - Mini PCI - 32 MB memory or greater - 300 MHz processor or higher

  • Publisher: PLANET
  • Last updated: May 22nd, 2012
CTC Load Utility

CTC Load Utility

The CTC Load Utility can be set up to communicate with a controller through an RS-232 port or an Ethernet network. You must establish a physical connection between your PC and the controller before you can use the CTC Load Utility to communicate with the controller.

  • Publisher: Control Technology Corporation
  • Home page: www.ctc-control.com
  • Last updated: May 22nd, 2012
MatrikonOPC Mark VI Direct Server

MatrikonOPC Mark VI Direct Server

The OPC Server for GE Speedtronic Mark VI Direct supports direct connections to Mark VI controllers over Ethernet networks. With this OPC Server, the GE TCI/GSM software is no longer required for communication to GE Mark VI controllers. Unlike other drivers, this product offers a high performance link to the Mark VI capable of sub-second scan rates.

ELCSoft

ELCSoft

ELCSoft programming software configures all Eaton Logic Control (ELC) controllers. With ELCSoft, applications can be created, edited and monitored. Move programs from one controller to another with ease. Program in ladder, sequential function chart or instruction language.

  • Publisher: EATON
  • Last updated: May 14th, 2012

Additional Atheros l2 ethernet controller selection

eZ-Net Manager

eZ-Net Manager

eZ-Net Manager allows you to control one or more monitors more easily via Serial and Network. If eZ-Net Manager is installed on your PC, you can control various operations with a few clicks of the mouse. Also, eZ-Net Manager provides self-diagnosis of monitors and convenient upgrades for easier management.

  • Publisher: LG Electronics, Inc.
  • Last updated: April 6th, 2016
SitePlayer

SitePlayer

SitePlayer best performs as a coprocessor that handles web protocols and Ethernet packets independently of the main device processor. Web traffic does not effect the device processor, which also adds a measure of security. Communication between SitePlayer and the device is accomplished through objects sent through a standard two-wire serial port.

  • Publisher: NetMedia, Inc.
  • Last updated: June 23rd, 2010
Kramer K-Router Plus

Kramer K-Router Plus

K−Router Plus is a software application for setting up and remotely controlling Kramer matrix switchers over an Ethernet, RS−232 or USB connection. The graphic user interface makes it easy to visualize and switch devices connected to the router. The powerful suite of utilities makes it easy to view and change EDID, communication, device and display settings.

  • Publisher: Kramer Electronics
  • Home page: www.kramerav.com
  • Last updated: March 15th, 2017
Intel USB eXtensible Host Controller Driver

Intel USB eXtensible Host Controller Driver

This driver contains support for the following Intel® Chipsets and Intel® Processors

  • Publisher: Intel Corporation
  • Last updated: April 1st, 2015
3DP Chip

3DP Chip

3DP Chip will enables you to enumerate devices and download the latest device drivers with few simple clicks. Problems with detecting your devices, finding device drivers to setup your system is worse than Blue screen of death. Everest and Aida32 doesn't provies you a device drivers and they are still heavy.

Native Instruments Controller Editor

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

  • Publisher: Native Instruments GmbH
  • Last updated: September 19th, 2023
Flash Magic

Flash Magic

Flash Magic is a tool for programming flash-based microcontrollers from NXP using serial, Ethernet, CAN bus, or SWD interfaces. It provides a lightweight executable program with a simple interface where you can load the Hex files. After programming, Flash Magic will perform an automatic verification of the burned data.

Grbl Controller

Grbl Controller

Grbl Controller is designed to send GCode to CNC machines, such as 3D milling machines. It isn’t super smart, it just needs to give the user a nice way to get commands down to whatever controller they are using. Qt is pretty cool because you can create a nice GUI application for Windows, Mac and Linux.

  • Publisher: Zapmaker
  • Last updated: June 27th, 2014
WAGO Ethernet Settings

WAGO Ethernet Settings

If a connection timeout occurs, you can retry the connection by using the “Identify“ button. If the problem persists, check the COM port settings and cabling. An IP address always consists of both network and computer addresses. The network mask determines which bits belong to the network address and which do not.

  • Publisher: WAGO Kontakttechnik GmbH
  • Home page: www.wago.us
  • Last updated: October 12th, 2012
Cutting Plotter Controller

Cutting Plotter Controller

The Cutting Plotter Controller is a software program that lets you perform settings at your computer instead of having to make them at the plotter's control panel. In particular, frequently-used cutting condition settings and complicated registration mark reading procedures can be easily performed. Using the Controller together with the driver further improves overall operating efficiency.

Related topics Trending topics

© Podnova Windows Library, 2024
Privacy • Cookie policy • Submit • Contact