Avaya power consumption calculator in Title/Summary

Turbine Steam-Consumption Calculator

Turbine Steam-Consumption Calculator is a program that will calculate the steam consumption for a turbine of known power and efficiency. The program will determine the specific and actual steam consumption and the outlet steam enthalpy, entropy, temperature and quality.

• Publisher: Wayne Jayes & Harvey Wilson
• Home page: www.katmarsoftware.com
• Last updated: August 25th, 2013

Power Consumption Measuring Software

The new software, available for the Yokogawa WT3000, WT1800, WT1600, WT500 and WT210 analyzers, allows the user to perform measurements according to IEC62301 Ed2.0(2011): Household electrical appliances - measurement of standby power and EN 50564:2011 - Electrical and electronic household and office equipment – Measurement of low power consumption.

• Publisher: YOKOGAWA
• Last updated: May 24th, 2012

Gst Loop Calculator

This piece of software is designed for calculating the device quantity and power consumption in GST fire alarm systems. With a friendly interface, the software may support eight remote client stations plus a local monitor station, making complete monitoring and control.

• Publisher: Gulf Security Technology Co.,Ltd.
• Last updated: July 19th, 2017

Avaya power consumption calculator in Description

STM8CubeMX

The STM8CubeMX is a graphical tool that allows configuring STM8 microcontrollers very easily and generating the corresponding configuration reports. The user can then configure the microcontroller thanks to a pinout-conflict solver, a clock-tree setting helper and a power-consumption calculator.

• Publisher: STMicroelectronics
• Last updated: August 24th, 2017

MSI ECO Meter

MSI ECO METER is a computer system power usage monitor. It gives you the power usage information and calculates your computer power consumption. The program displays the power consumption list of your computer components, the total power consumption, and the average power consumption.

• Publisher: MICRO-STAR INT'L CO., LTD
• Home page: www.msi.com
• Last updated: December 14th, 2017

Configuration Calculator

Configuration Calculator is an app that allows you to determine the number of fixtures each circuit in your installation can support, based on type of fixture, power source (Data Enablers for color and iW fixtures, line power for eW fixtures), line voltage, circuit load and cable lengths. Also, it calculates your configuration's total power consumption in both watts and amps.

• Publisher: Philips Solid-State Lighting Solutions, Inc
• Home page: www.colorkinetics.com
• Last updated: January 30th, 2016

Drive Power Manager

Drive Power Manager lets you manage the power consumption as well as the noise by your drives. The interface is very easy to use. As a first step, you can select the drive to manage. A first pane lets you manage drive power. The second pane will allow setting a value for noise control. Drive Power Manager is definitely a useful piece of software when you need to tweak your system’s power use.

• Publisher: EFD Software
• Home page: www.drivepowermanager.com
• Last updated: February 26th, 2010

i-Cool

i-Cool adjusts and monitors your CPU usage, fan noise and CPU performance level. It enables PC users to reduce the heat generated by CPU. i-Cool can adjust the CPU performance in 2 modes: manual and automatic. i-Cool continuously monitors the CPU loading and accordingly adjusts the CPU power usage and CPU fan noise.

• Publisher: GigaByte Technology, Co. Ltd.
• Last updated: November 18th, 2011

Additional Avaya power consumption calculator selection

STM32CubeMX

The user must configure each required embedded software thanks to a pinout-conflict solver, a clock-tree setting helper, a power-consumption calculator, and an utility performing MCU peripheral configuration (GPIO, USART, ..) and middleware stacks (USB, TCP/IP, ...).

• Publisher: STMicroelectronics
• Last updated: December 16th, 2017

HWMonitor

HWMonitor is a hardware monitoring program that reads PC systems' main health sensors, like CPU temperature, voltage, power consumption, and utilization. The HWMonitor‘s PC health monitoring engine is available for customized use through the CPUID System Monitoring Development Kit.

• Publisher: CPUID
• Home page: www.cpuid.com
• Last updated: February 21st, 2024

ThinkPad Power Manager

Power Manager helps you save energy by reducing the running cost of your ThinkPad. You can use power management to reduce the power consumption of a device and maintain and preserve the state of the file system in RAM in the Reset, On, Idle, and Suspend power states. You can create and schedule sophisticated energy saving events that automate your ThinkPad, and reduce your running costs.

• Publisher: Lenovo Group Limited
• Home page: support.lenovo.com
• Last updated: July 31st, 2012

Intel® Rapid Start Technology Manager

Intel® Rapid Start Technology Manager is a free program that enables your system to get up and run faster from even the deepest sleep, saving time and power consumption. You can change the status of your computer from and S3 sleeping mode to an S4 sleeping mode or set the timer for your PC to stay in the power saving mode.

• Publisher: Intel Corporation
• Last updated: October 30th, 2013

TOSHIBA PeakShift Control

TOSHIBA PeakShift Control is a free program that stops drawing electricity from the AC power supply and start to use the on-board battery. The program helps to avoid power use during the electricity peak and enables electricity to be consumed at a more even rate throughout the day.

• Publisher: TOSHIBA
• Last updated: October 29th, 2012

HP Power Advisor

The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power consumption and proper selection of components including power supplies at a system, rack, and multi-rack level. A variety of additional features are also provided including a condensed bill of materials, a cost of ownership calculator, and a power report.

• Publisher: Hewlett-Packard Development Company, L.P.
• Last updated: April 9th, 2013

Geeks3D.com FurMark

FurMark is an OpenGL-based GPU stress test utility. It makes it possible to push the GPU to the max in order to test the stability of the graphics card (and the PSU too!) leading to maximal GPU and VRM temperatures. The latest version supports latest cards like: NVIDIA GTX 500, AMD HD 6000 etc, a programmable GPU temperature alarm and an updated 3D rendering.

• Publisher: Geeks3D.com
• Home page: www.geeks3d.com
• Last updated: May 14th, 2013

Aurora Blu-ray Media Player

Aurora Blu-ray Media Player is the best and most powerful media player for Windows in the world. It can support Windows systems perfectly, especially the Windows 8. Meanwhile, it can support all media formats existing today, including ISO format.

• Publisher: Aurora Blu-raysoft
• Home page: www.bluray-player-software.com
• Last updated: January 31st, 2016

Dynamic Energy Saver

GIGABYTE Dynamic Energy Saver incorporates a host of intelligent features that use a proprietary hardware and software design to considerably enhance PC system energy efficiency, reduce power consumption and deliver optimized auto-phase-switching for the CPU, Memory, Chipset, VGA, HDD and system fans.

• Publisher: Gigabyte
• Home page: gigabyte.com
• Last updated: January 17th, 2012

Joulemeter

Joulemeter is a software tool that estimates the power consumption of your computer. It tracks computer resources, such as CPU utilization and screen brightness, and estimates power usage. Joulemeter can be used for gaining visibility into energy use and for making several power management and provisioning decisions in data centers, client computing, and software design.

• Publisher: Microsoft Research
• Home page: research.microsoft.com
• Last updated: October 4th, 2011