Avr usb programmer vcds repair in Title/Summary
Robokits AVR USB Programmer is an application that can program AVR devices in the STK500V2(HID Mode) and STK500(CDC Mode) modes. It provides all the necessary functions like read, write, lock, and fuse settings. It is compatible with AVR Studio, AVRDUDE, and compilers that support STK500 or STK500V2 protocols.
- Publisher: ROBOKITS INDIA
- Last updated: April 29th, 2012
Use the USB Programmer Module to quickly setup thermostats using your computer or by transferring another thermostat's settings. This unique accessory allows the installer to copy stored information from a thermostat, which can then be loaded into other thermostats without the need to manually configure each setting.
- Publisher: source1thermostats
- Last updated: July 17th, 2018
GQ USB Programmer is an application that lets you burn HEX files to microcontrollers using GQ programming devices. The microcontroller can be automatically determined by the program. The devices supported depend on the programmer hardware connected to PC.
- Publisher: MCUmall Electronics Inc.
- Home page: www.mcumall.com
- Last updated: June 28th, 2015
Avr usb programmer vcds repair in Description
Ember’s InSight USB Link is a low-cost FLASH programming device used with the EM250 and EM260 family of RF transceivers. The programmer connects to any PC via USB and to Ember’s Radio Control Module (RCM) via a 10-pin cable with keyed connector.USB Link kit includes the plug-and-play USB programmer hardware and easy to use software tools that read and write customer applications.
- Publisher: Ember Inc.
- Last updated: December 3rd, 2010
EasyBCD gives you complete control over the Windows boot menu. It allows you to modify the changes of operating systems in the menu, change the countdown time (seconds), or even disable the timer. Settings of entering the Safe Mode of each Windows version could also be modified.
- Publisher: NeoSmart Technologies
- Home page: neosmart.net
- Last updated: July 3rd, 2020
AVRFLASH represents an irreplaceable tool for all those working with avr microcontrollers. By means of this programmer, it is possible to program almost any AVR microcontroller, including those embedded(soldered) in printed circuit board. The AVRFLASH programmer is connected to the microcontroller via six lines.
- Publisher: MikroElektronika
- Home page: www.mikroe.com
- Last updated: January 27th, 2012
EE-Prog is an USB 24 series EEPROM programmer. Its Hardware is based on AVR ATMega8 microcontroller.Feature: -Support USB 1.1 - Support all 24c EEPROM (24c01 - 24c1024) (no Auto Detect yet, Please Help!) - Adjustable TWI Speed (100 KHz-1MHz) - Read - Write - Verify - Reading and writing at speed of ~ 5-6 Kbytes/s
- Publisher: Amir Khorsandi
- Last updated: July 4th, 2013
Device Programmer Desktop is designed to replace the earlier version of XPROG™ programmer. Device Programmer Desktop is fully upwardcompatible hardware with XPROG™ programmer and have many additional features. The Device Programmer Desktop supports in circuit and on board programming 68HC05,68HC08, 68HC11, 68HC(S)12, TMS370, AVR, ATMEGA, PIC,SPI, EEPROM and FLASH memories.
- Publisher: DB Software
- Last updated: March 1st, 2012
Additional Avr usb programmer vcds repair selection
BASCOM AVR is a very powerful and easy-to-use compiler for the AVR series of micro controllers developed by Atmel. The program comes with a very user-friendly interface and a set of simple commands, and provides more flexibility than other programs in this category.
- Publisher: MCS Electronics
- Home page: www.mcselec.com
- Last updated: December 15th, 2016
The user can add new devices and actions using pascal scripts Over write or insert mode; Support hexadecimal, decimal, octal and binary systems; File size up to 2GB (depends on the virtual memory of the computer); Print the whole file or selected part of it
- Publisher: ELRASOFT
- Home page: www.elrasoft.com
- Last updated: August 8th, 2012
Remo Repair Zip Tool helps you to repair corrupt Zip file and extract the files and folders contained in the Zip file. Easy to use software provides wizard based interface to repair corrupt or damaged Zip files
- Publisher: Remo Software
- Home page: www.remosoftware.com
- Last updated: May 27th, 2020
On the microcontroller side it is compatible with 10-pins Atmel standard IDC header. KamPROG works with Bascom and Atmel AVR Studio as well as with our decicated application. Programmer is connected to PC through USB port and does not require any drivers.
- Publisher: Kamani
- Home page: www.kamami.com
- Last updated: June 29th, 2015
eXtreme Burner PIC is a high quality but low cost USB port based programmer for the popular PIC18F and PIC16F series MCUs. Main features: - In Circuit Serial Programming (ICSP) support. - Supports All PIC18F ( and PIC18LF) chips - More than 45 devices. - Supports Selected PIC16F (and PIC16LF). - High Voltage Programming Support.
- Publisher: eXtreme Electronics, India
- Last updated: September 1st, 2014
The ALA28 Pager Programming software, provides the flexibility to program ALA28 pagers to meet individual requirements. The program contains a flexible interface with radio buttons so you can configure your product in an easy manner without too much hustle.
- Publisher: sjsmit
- Home page: www.apollowireless.com
- Last updated: July 15th, 2011
Spansion’s FSK-PUP Flash Starter Kit – PISMO USB Programmer) is an advanced portable development tool that provides features including Read, Program, Erase, Burst Read, and Scripting. Supports NOR / Eclipse (ADP/ADM/AADM), ORNAND™ and SPI devices.
- Publisher: Spansion
The Programmer works on USB port and can be used with Laptops. It comes with a full featured software which allows batch programming and saves time for mass programming requirements. Its compatible with most version of Windows OS including Windows 98, Windows ME, Windows 2000, Windows XP , Windows Vista and Windows 7.
- Publisher: ROBOKITS INDIA
The goals of this program is a nice small, fast, reliable and simple to use program.You can set your settings according to your project. this steps will execute after you push "Auto Program" button on the main window or press CTRL+P shortcut.Fuses and Lock window help you to set settings for AVR chips.
- Publisher: Behzad khazama
- Home page: www.khazama.com
- Last updated: July 17th, 2011
Flobo USB Drive Repair Tool is a neat little program that comes in handy in such situations when USB Flash drives have been infected with viruses or malware. Usually, when this happens, the files that were stored on that drive get deleted, hidden, or replaced with shortcuts. Flobo USB Drive Repair Tool can fix exactly these problems in some occasions, restoring files to their initial states.
- Publisher: Flobo Recovery, Inc.
- Last updated: March 31st, 2014