Boundary element method in Title/Summary

EPD100

This free educational utility is a 2d boundary element method field solver. It allows you to view the equipotential lines around a transmission line. By seeing where the lines are densest you can view the areas of strongest field and better understand which areas of a structure have a greater effect on impedance.

• Publisher: Polar Instruments
• Home page: www.polarinstruments.com
• Last updated: May 20th, 2011

AxiDriver-Demo

AxiDriver is based on the boundary element method for axis-symmetric problems involving sub-domain modeling. The loudspeaker driver is assumed to have a conventional electro-dynamic motor and a rigid diaphragm. AxiDriver simulates the acoustic field under the condition of one or two infinite baffles. It is possible to extend the boundaries to form a wave-guide and to place reflectors.

• Publisher: R&D-Team

ABEC

ABEC combines boundary and lumped element methods. Complicated acoustics is calculated with the help of BEM. Simple acoustics, structures and electronics is handled by the LEM. ABEC stands for Acoustic Boundary Element Calculator. ABEC directly solves the Helmholtz Integral for the interior and exterior radiation problem. It's all acoustics, no mechanics.

• Publisher: R&D-Team

Boundary element method in Description

ED-Elas2D

ED-Elas2D is an educational program package for the analysis of 2D solids and structures using the Finite Element Method (FEM). The Finite Element Method is undoubtedly the most powerful numerical technique for solving a great variety of problems in science and industry.

• Publisher: FEMSCOPE
• Last updated: April 16th, 2011

Aqua3D

AQUA3D is a program developed to solve three-dimensional groundwater flow and transport problems using the Galerkin finite-element method. AQUA3D solves transient groundwater flow with in homogeneous and anisotropic flow conditions. Boundary conditions may be prescribed nodal head and prescribed flow as a function of time or head-dependent flow.

• Publisher: Scientific Software Group
• Last updated: September 27th, 2008

GFLOW

GFLOW is a highly efficient stepwise groundwater flow modeling system developed by Haitjema Software, a subdivision of Haitjema Consulting, Inc. GFLOW is a Windows program based on the analytic element method. It models steady state flow in a single heterogeneous aquifer using the Dupuit-Forchheimer assumption.

• Publisher: Haitjema Software
• Home page: www.haitjema.com
• Last updated: December 15th, 2009

CCHE2D Beta

CCHE2D is an integrated package for two-dimensional simulation and analysis of river flows, non-uniform sediment transport, morphologic processes, coastal processes, pollutant transport and water quality. These processes are solved with the depth integrated Reynolds equations, transport equations, sediment sorting equation, bed load and bed deformation equations.

• Publisher: NCCHE - National Center for Computational Hydroscience and Engineering
• Last updated: October 31st, 2011

2D Frame Analysis

This application uses a highly flexible, general, finite element method for static analysis of multi span beams, 2D Trusses and 2D Frames. It features a powerful, interactive and easy interface.

• Publisher: EngiSSol
• Home page: www.engissol.com
• Last updated: October 7th, 2008

Additional Boundary element method selection

AFMG Reflex

AFMG Reflex is a two-dimensional acoustics simulation software to model the reflection, diffusion, and scattering of a sound wave incident upon a defined geometrical structure.The simulation method is based on the Boundary Element Method (BEM) to calculate the reflection, diffusion, and scattering properties of the surface.

• Publisher: AFMG
• Home page: reflex.afmg.eu

GEO5

GEO5 is a powerful software suite for solving geotechnical problems based on traditional analytical methods and Finite Element Method (FEM). Individual programs verify a specific structure, which keeps them intuitive and easy to use. GEO5 is designed to solve most geotechnical tasks.

• Publisher: Fine spol. s r.o.
• Home page: www.finesoftware.eu
• Last updated: June 4th, 2015

FrameMaster

FrameMaster is a FEM-program that helps you dimension almost all kinds of constructions: roof-trusses, floors, walls, bridges,furniture, shafts and much much more. FrameMaster is both one of the cheapest and most powerful program in its category.

• Publisher: Dahlin Maskin
• Last updated: January 1st, 2002

Examine2D

Examine2D is a very fast two-dimensional indirect boundary element program for calculating stresses and displacements around underground and surface excavations in rock. It provides an integrated graphical environment for data entry and visualization. Additionally, the CAD based modeler allows for point and click geometry input and editing.

• Publisher: Rocscience inc
• Last updated: March 31st, 2013

FreeFem++

Problems involving PDE (2d, 3d) from several branches of physics such as fluid-structure interactions require interpolations of data on several meshes and their manipulation within one program. FreeFem++ includes a fast 2^d-tree-based interpolation algorithm and a language for the manipulation of data on multiple meshes (as a follow up of bamg).

• Publisher: FreeFem
• Last updated: May 3rd, 2012

FreeFem++-cs

FreeFem++-cs is an integrated environment for FreeFem++, a C++-like computer language dedicated to the finite element method. It adds the following extra features to FreeFem++ : - Color-coded editor. - Automatic highlighting of FreeFem++ compilation errors, linked back to the EDP source code. - Integrated graphics area for 2D and 3D. - Online help including documentation in HTML.

• Publisher: Antoine Le Hyaric
• Last updated: June 27th, 2014

FIN EC

FIN EC is a software suite for static analysis of frame structures. FIN EC contains both programs to calculate internal forces in frame structures using the Finite Element Method and dimensioning programs used for design and verification of individual structural elements or details. All programs of the suite support the new European standards - Eurocodes.

• Publisher: Fine Civil Engineering Software
• Last updated: October 7th, 2015

GTS NX

GTS NX is a simulation program developed for the evaluation of soil-structure interaction based on the finite element method. The program helps engineers to perform step-by-step analysis of excavation, banking, structure placement, loading and other factors that directly affect design and construction.

• Publisher: MIDAS Information Technology Co., Ltd
• Last updated: July 16th, 2014

EngiLab Rod.2D

EngiLab Rod.2D is an easy-to-use yet powerful engineering tool for the linear static analysis of plane trusses for Windows. It features a Full GUI (Graphical User Interface) for pre-processing or post-processing and uses the Finite Element Method (FEM) for plane trusses for its analysis purposes.

• Publisher: EngiLab
• Last updated: April 13th, 2008

AutoFEM Analysis

AutoFEM Analysis is an easy-in-use software for finite element analysis. AutoFEM Analysis can be used by the broad community of engineers working in the field of mechanical and structural designing. You need not be a specialist in the finite element method in order to use AutoFEM Analysis.

• Publisher: AutoFEM Software Company
• Home page: www.autofemsoft.com
• Last updated: August 18th, 2016