Danfoss foresee in Title/Summary

Danfoss Foresee

Foresee™ is a calculation and selection program for Danfoss products. It calculates the capacity of a given compressor and searches for compressors that match a required cooling capacity.The program can switch rapidly from model selection to capacity selection. Results are listed in a tabular form which can be sorted by capacity and by model name.

• Publisher: Danfoss Commercial Compressors
• Last updated: April 11th, 2008

Danfoss Heat Exchanger Dimensioning program

Danfoss LPM has developed a computer software for dimensioning the substations and heat exchangers and for selecting the size and type of control valves and pumps. The program is used by Danfoss LPM’s representatives and sales personnel and can be obtained free of charge from Danfoss LPM by downloading it from HeatNet or on cd-rom.

• Publisher: Danfoss Group
• Last updated: March 2nd, 2012

Danfoss Winstart

Danfoss Winstart is a purpose-designed program for selecting the right soft starter model. WinStart will help you determine the appropriate starter model to suit your application, and is useful where the application does not match the soft starter's standard published rating.

• Publisher: Danfoss
• Last updated: February 6th, 2011

Danfoss foresee in Description

DanCap

DanCap (or Danfoss Capillary Tube Selector) is a utility designed to make calculations related to a capillary tube throttling device for a refrigeration system, with empirical formulas being used for this purpose. According to the developers, the results returned by the utility are start values for optimization, values that are appropriate for the system to function.

• Publisher: Danfoss Compressors GmbH
• Last updated: June 1st, 2008

VLT Energy Box

VLT Energy Box Software allow energy consumption comparisons of HVAC fans and pumps driven by Danfoss drives and alternative methods of flow control. This tool may be used to project, as accurately as possible, the costs, savings, and payback of using Danfoss drives on HVAC fans and pumps.

• Publisher: Danfoss Drives A/S
• Last updated: November 28th, 2009

Coolselector

As the world gets more complicated we all need support to make the right choices. Danfoss helps you to make the right selections! Coolselector helps you to calculate the performance of the components under your conditions, not just according to the standards.

• Publisher: Danfoss A S
• Last updated: January 11th, 2013

LynxPlanner

The new design tool from Danfoss Solar Inverters, the LynxPlanner 1.0 is based on the coming PV*Express 4.0 platform from Valentin. Drawing on a comprehensive database of PV modules, updated by the module manufacturers themselves and 1400 meteorological points of observation, the LynxPlanner will make a proficient proposition to system layout.

• Publisher: danfoss solar
• Last updated: June 13th, 2014

SysStabV Tool

SysStabV Inverter Software Tool is a program that allows you to update Danfoss inverters to meet the “Ordinance on Grid System Stability (SysStabV). This solution is applicable for TLX inverters using older communication boards. You can change the inverter setting to comply with the Ordinance on Grid System Stability.

• Publisher: Danfoss Solar Inverters A/S
• Last updated: October 20th, 2014

Additional Danfoss foresee selection

Danfoss Hexact

Hexact immediately identifies the right heat exchanger for your chiller, heat pump or other application. The heat exchanger design software covers both innovative MPHE and traditional BPHE types of brazed heat exchangers. It is easier than ever to find the right heat exchanger for your chiller, heat pump or other application.

• Publisher: Danfoss
• Last updated: December 16th, 2017

K7 Internet Security

K7 Internet Security is a program able to provide users with tools to protect their personal computers against viruses, Trojans, spyware, and other threats that can damage the integrity of their PCs. It uses a moderate amount of system memory, the interface looks kind of rusty, but it the end it gets the job done.

• Publisher: K7 Computing Pvt Ltd
• Home page: www.k7computing.com
• Last updated: June 30th, 2019

HDD Health

HDD Health is a system utility that monitors your hard disk health status constantly. The program reads the S.M.A.R.T. information available in all modern hard disks to determine their health status. Thanks to this information, HDD Health can foresee any upcoming disk failure and warn you about it, so that you can back up your critical information and avoid any data loss.

• Publisher: PANTERASoft
• Last updated: June 10th, 2012

MCT 10

MCT 10 greatly reduces programming and commissioning times. Drives are managed in a standard folder-based user interface that’s familiar and easy to understand. Parameter settings for each drive are contained in a single file, simplifying setup and the duplication of parameter sets between drives.

• Publisher: Danfoss Drives
• Last updated: August 10th, 2023

Coolselector2

Coolselector2 allows you to select the refrigeration and air conditioning components based on your requirements or standard operating conditions. You can configure parameters such as cooling capacity, refrigerant, evaporation and condensation temperature, and other critical variables in common refrigeration systems.

• Publisher: Danfoss A/S
• Last updated: April 9th, 2018

DIRcalc

DIRcalc is a free software application that allows you to calculate refrigeration and air conditioning. The max allowable pressure for the PM family is still 28 bar in the program because they have to be ordered as special delivery anyway. The application is easy to install, easy to use and has a friendly user interface

• Publisher: Danfoss
• Last updated: March 7th, 2013

Zodiac Clock 3D Screensaver

The Zodiac Clock 3D Screensaver will transport you to the time when our ancestors believed in what the stars appeared to tell them. Or at least in what they believed they were telling them It will show the face of the clock as if it was the Earth, with the Moon and the Sun orbiting around it.

• Publisher: 3Planesoft
• Home page: www.3planesoft.com
• Last updated: July 2nd, 2018

MCT 31 Harmonic Calculation Software

MCT31 is a PC software tool used for calculating Harmonic Distortion. The harmonics calculation report consists of 4 sections containing the following data: - Section 1 is containing input data - Section 2 contains results at the transformer primary and secondary side - Section 3 contains the results at the common bus bar - Section 4 contains the results at the input of the drives

• Publisher: Danfoss Drives
• Last updated: November 13th, 2009

HEX calc

HEX Calculator helps you calculate the correct plate heat exchanger for your requirements and needs. The HEX Calculator dimensioning program will then via the calculations you make, guide you to the correct plate heat exchanger for your application. This toolbox only applies to a limited range of heating applications.

• Publisher: Danfoss LPM
• Last updated: August 11th, 2008

AKM

AKM is a PC program for setup, commissioning, log collection and presentation. This software application has also capabilities for alarm handling and daily monitoring of refrigeration plants. AKM offers a graphical user interface (MIMIC) for easy overview of ADAP-KOOL plants.

• Publisher: Danfoss
• Last updated: April 20th, 2012