License: All

Sort by: Relevance

Datacom icom in Title/Summary

Paradise Datacom Compact Outdoor SSPA M&C

Teledyne Paradise Datacom’s Compact Outdoor (C) series SSPAs bring high power solid state transmit amplifiers right to the antenna’s feed. Designed for antenna-mount applications, the Compact Outdor series SSPAs deliver the highest uplink powers available per unit volume and weight offered anywhere in solid state technology.

Publisher: Paradise Datacom LLC
Home page: www.paradisedata.com
Last updated: September 30th, 2011

Radio Datacom kcToolkit

The following common embedded Bluetooth profiles are available: Serial Port Profile (SPP), Dial Up Networking Profile (DUN), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP), Headset Profile (HSP), Handsfree Profile (HFP). Other less common Bluetooth profiles also available.

Publisher: Radio Datacom

Icom RS-BA1

The Icom RS-BA1 IP Remote Control Software allows you to use an Icom compatible radio installed in another room using your home network or even from a remote location over the Internet. Most functions and modes of your Icom compatible transceiver can be controlled, including interference rejection functions and IF filter settings.

Publisher: Icom America Inc.
Last updated: December 22nd, 2015

Datacom icom in Description

N4PY Icom Control program

The N4PY Icom Control Program controls the following Icom Radios: IC-756PRO, IC-756PROII, IC-756PROIII, IC-706MKIIG, IC-746, IC-746PRO, IC-703, IC-775, IC-756, IC-718, IC-781, IC-7000, IC-7100, IC-7200, IC-7600, IC-9100, IC-7410, IC-7700, and IC-7800. It also has support for the Microtelecom Perseus receiver both as a standalone receiver and Panadapter to be used with an Icom radio.

Publisher: N4PY Software
Last updated: March 28th, 2014

IC7100BKT - Cat Control

IC7100BKT Icom IC-7100 CAT Control is a program for the control of the transceiver Icom IC-7100 with the PC. The program features: direct management and synchronization of the 5 memory banks, import / export of memories in CSV format, import of memories from the ARRL program TravelPlus, direct management of DV DStar, memory Management CW Keyer, and more.

Publisher: Mauro Capelli
Home page: www.iz2bkt.com
Last updated: October 28th, 2016

AIMS App Analyzer

Using this tool you can greatly improve the accuracy of updates because you no longer need to rely strictly on your memory to find every place that a form, script, index, etc. is referenced. This program creates a list showing where all layouts, scripts, functions, indexes, saved operations, table names, index names, or other user specified text is referenced in an application.

Publisher: AIMS DataCom
Home page: www.aimsdc.net
Last updated: November 21st, 2011

Pattern Generator

The PPG12500 is a 1-13 Gb/s single-channel Programmable Pattern Generator. Key features such as 24 Mbit user-programmable pattern memory and two-tap de-emphasis provide the capability for compliance testing in Backplane, Copper and Fiber applications e.g. PCIe, USB3.0, SAS, 802.3ap 10G Ethernet, and Displayport testing.

Publisher: Centellax
Last updated: December 11th, 2010

MANAgents

With MANAgents™ you can control all of your Datacom Systems switches directly from your desktop with an easy to use interface. Main features: - Maintain channel names after analyzer upgrade - Configure matrix switches for daisy-chaining - Built-in features to troubleshoot matrix switches

Publisher: Datacom Systems
Last updated: November 28th, 2011

Additional Datacom icom selection

Icom IC-PCR1000

Icom IC-PCR1000 is a free-to-use wideband computer receiver for Windows OS. The real-time bandscope function makes it easy to ﬁnd busy frequencies and also easy to observe receive frequency band conditions. The maximum band width is ±200 kHz. It has an easy-to-use interface.

Publisher: Icom Inc.
Last updated: June 18th, 2008

Icom CS-51

Icom CS-51 is a free program designed for data entry, settings and cloning of the ID-51A/E VHF/UHF transceiver. The program allows you to customize the call sign programming fields and to store 500 memory often-used channels frequencies. You can also the scan edge channels as regular memory channels and assign them to a bank.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: April 13th, 2013

Icom CS-31

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: February 16th, 2012

Icom CS-5100

Icom CS-5100 is a free program designed for data entry, settings, and cloning of the ID-5100A/ID-5100E VHF/UHF transceivers. The File menu of the program contains submenus that you can use to create, open, save, import and/or export and print the data files.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: February 26th, 2015

Icom CS-51PLUS

This application is designed for programming the ID-51 PLUS with a PC. It provides a tree view of the memory map, CH bank and other programmable region in the hardware; you can easily modify the values by double clicking on a memory column. This cloning software is only for the ID-51 PLUS and the ID-51 Icom 50th Anniversary Limited Edition transceivers.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: November 15th, 2014

Icom CS-2730

The CS-2730 application is designed for programming the IC-2730 device with a PC. You can use this application to install a new firmware for your device. Before using this software, be sure to connect the transceiver and the PC with the optional cloning cable.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: January 29th, 2017

Radio Operations Center SC for Icom

The Radio Operations Center (ROC) is a comprehensive suite of full-featured software solutions for commercial radio, amateur (Ham) radio, MARS and marine radio control. ROC is the only 32-bit Windows software available for operating TNCs in host mode as well as soundcard support for all the digital radio modes.

Publisher: Creative Services Software, Inc
Last updated: May 24th, 2012

ARC5 for Icom IC-R5

ARC5 is the latest programming and cloning software for the Icom IC-R5 receiver, it is also the most user friendly software available for your Icom communications receiver developed by the scanner software world market leader! ARC5 includes the most versatile memory editor available on the market including cut/copy/paste options!

Publisher: BuTel software
Home page: www.butel.nl
Last updated: October 17th, 2012

Icom IC-PCR1500

The IC-PCR1500 is a PC control receiver and all functions are controllable from your PC. Explore radio signals from all over the world from 0.01 to 3299.999MHz.The USB port provides a faster data link to the PCR1500 which allows you to expand the receiver’s capabilities with quicker response times as well as new audio processing functions.

Publisher: Icom Inc.
Home page: www.icom.co.jp
Last updated: May 22nd, 2012

ARC20

ARC20 is the latest programming and cloning software for the Icom IC-R20 receiver, it is also the most user friendly software available for your icom receiver developed by the scanner software world market leader! ARC20 includes the most versatile memory editor available on the market including cut/copy/paste options!

Publisher: BuTel software
Home page: www.butel.nl
Last updated: November 11th, 2011