Design of columns biaxial bending in Title/Summary

Cross Section Analysis & Design

Cross Section Analysis & Design performs all calculation tasks for generic cross sections of any material. Moreover, the program can perform reinforcement design as per AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP65.

• Publisher: Engineering Software Solutions
• Home page: www.engissol.com
• Last updated: June 16th, 2023

Bar Bending Schedule Program in Microsoft Excel

Bar bending schedule is used to communicate the design requirement of reinforcement steel to the fabricator and execution team and to enumerate the weight of each size of steel. It is a list of reinforcement steel bars, which includes size and number of bars, cutting length of bars, weight of steel and a sketch representing the shape of bar to be bent.

• Publisher: Bending Schedule
• Last updated: July 16th, 2010

Bending Light

Explore bending of light between two media with different indices of refraction. See how changing from air to water to glass changes the bending angle. Play with prisms of different shapes and make rainbows. Explain how light bends at the interface between two media and what determines the angle.

• Publisher: University of Colorado, Department of Physics
• Home page: phet.colorado.edu
• Last updated: June 16th, 2023

Design of columns biaxial bending in Description

WinFAD

WinFAD is a computer program developed to assist the bridge engineer in designing or checking spread and pile concrete footings subjected to eccentrically applied axial loads that produce biaxial bending moments. Acceptable spread footing sizes and pile patterns are quickly and efficiently determined using WinFAD.

• Publisher: IAI Software
• Last updated: October 27th, 2011

Pile Cap

Pile cap by Digital Canal analyzes any pile arrangement and design the pile cap accordingly, including cap thickness, steel requirements, and rebar spacing. Any configuration of up to 200 piles may be analyzed for both axial and biaxial bending moments.

• Publisher: Digital Canal
• Home page: digitalcanalstructural.com
• Last updated: December 16th, 2017

Dlubal SHAPE-MASSIVE

This program calculates the cross-section properties for thick-walled sections of any shape and determines their stresses. Besides, a reinforced concrete design can be performed for axial force, shear forces, torsion and biaxial bending moments according to DIN 1045-1, ONORM B 4700 and Eurocode 2.

• Publisher: Dlubal Software
• Home page: www.dlubal.com
• Last updated: June 3rd, 2014

TechnoLogismiki Works 2011

Introducing TechnoLogismiki Works the most robust solution for Engineers:- Hydraulics: water, sewer and irrigation networks, culverts, dams, solvers. - Hydrology: water budget in catchments and flood flows. - Environmental: roadway pollution, mobile emissions model, landfill gas, construction noise.

• Publisher: TechnoLogismiki
• Last updated: October 21st, 2010

KaderColumn

KaderColumn is a tool for designing tied short columns. It designs columns subjected to up to six cases of loading consisted of axial load and bending moment applied about the maximum principle axis. The program constructs the column strength interaction diagram. Bending moment-Axial load curve and check if all input cases of loading being within the design curve.

• Publisher: KaderPrograms
• Last updated: May 18th, 2010

Additional Design of columns biaxial bending selection

CSiCol

CSiCOL is a comprehensive program that can be used for the analysis and design of columns. CSiCOL provides a 'Quick Design Wizard' tool that guides the users step-by-step, through the whole process of column design. It is capable of handling an unlimited number of load combinations both for sway and non-sway conditions.

• Publisher: Computers and Structures, Inc.
• Home page: www.csiberkeley.com
• Last updated: July 2nd, 2014

StruCalc

StruCalc is the next generation of structural analysis software. The intuitive interface combined with the power to design multiple span members using steel, wood, flitch beams or manufactured lumber propels StruCalc ahead of the competition.

• Publisher: The Vitruvius Project, Inc
• Last updated: November 7th, 2017

RISAFloor

RISAFloor is an application used to design floor systems and works hand in hand with RISA-3D and RISAFoundation. The program will manage loads, design beams and columns, create quality CAD drawings, and automatically delivers RISA-3D the information that it needs for the design of lateral systems.

• Publisher: RISA Technologies
• Last updated: March 14th, 2022

spMats

spMats is a program that allows you to optimize complicated foundations design, reinforcing and soil-structure interaction. It allows you to analyze and design concrete foundation mats, combined footings and slabs on grade. The program also performs punching shear calculations around columns and piles.

• Publisher: STRUCTUREPOIN, LLC
• Home page: www.structurepoint.org
• Last updated: April 19th, 2013

NCMA Masonry

NCMA Masonry is a computer program developed for the design of masonry components. The components that can be designed currently are reinforced and unreinforced walls subjected to either out-of-plane or in-plane lateral loads, lintels constructed of either masonry or precast concrete, and reinforced masonry columns.

• Publisher: National Concrete Masonry Association
• Last updated: September 21st, 2012

ITSdesign

ITSdesign is a visually-oriented tank design program. Being comprehensive and easy-to-use, it helps design AWWA D-100-11 water storage tanks and API-650, 12th Edition fuel storage tanks, both in US and SI units. With ITSdesign, time-consumption and variables are reduced.

• Publisher: Innovative Tank Solutions, LLC
• Last updated: October 29th, 2015

Dlubal RX-TIMBER 64-bit

RX-TIMBER is a DLUBAL program family that meets specific demands in timber engineering. With the programs included in the RX-TIMBER package you can design glued-laminated beams, continuous beams, columns, frames, purlins and bracings. The governing result combinations are created automatically with the add-on module RF-COMBI that is integrated in RX-TIMBER.

• Publisher: Dlubal Software
• Home page: www.dlubal.com
• Last updated: March 22nd, 2015

CHECKSTEEL

CHECKSTEEL is a structural steel design tool that can be used for bending, torsion, shear, bearing, compression, tension, and combined action design checks as per to AS 4100 and NZS 3404. It can calculate the section properties for Symmetric I-Beams, Taper Flange Beams, Monosymmetric I-Beams, Tees, Parallel Flange Channels, etc.

• Publisher: Revolutio PTY LTD
• Last updated: July 18th, 2017

SuperBeam

This program lets you easily make the calculations related to the design of the beams so they can stand the daily use of the building, as well as resist movements from diverse sources such as earthquakes or the daily passing of heavy trucks, taking into account the use of the building, as well as other factors. For specialized users only.

• Publisher: Survey Design Associates Limited
• Last updated: August 14th, 2018

Spread Footing Design

Footings are designed to resist uplift and sliding forces as well as biaxial column moments and compressive forces. The all new “Vista-style” user-interface is more convenient and intuitive than ever! Footings are designed or checked using the latest ACI 318-2008 code.

• Publisher: Digital Canal Corporation
• Last updated: October 12th, 2011