Etl universal programmer in Title/Summary

ETL Universal Programmer

The ETLUNIPROG software designed for support early ETL programming tools that arranged the parts of MS-DOS drivers for each separated board now combine into one software shell. The software used communicating with boards . The ETLUNIPROG user interface includes simple controls to activate boards and modes of operate.

• Publisher: Engineering Technical Laboratory
• Home page: www.etlweb.com
• Last updated: March 27th, 2008

KDI universal programmer

The KDI Universal Programmer 3.0 is a professional low cost parallel programmer, covering most of the classic and mega AVR 8-bit RISC microcontrollers, both I2C and Microwire serial EEPROMs and also MCS-51 family of Atmel corporation. The programmer connects to the PC through a standard parallel port and programs the supported chips via a very user friendly software.

• Publisher: KDI

KL3 Universal Programmer

KL3 is a universal board programmer for Midian Electronics products. It enables the following operations: Product Selection: Select the desired product from the Product Selection screen upon boot up or from the File menu New Product. Saving a Data File: Select Save As from the File menu. Click the File Name box, enter the file name and click Save.

• Publisher: Midian Electronics, Inc.
• Last updated: April 6th, 2012

Etl universal programmer in Description

UP-1024P

UP-1024P Super Speed Universal Programmer -256 pins universal driving; -USB2.0 port, compatible to USB1.1 port; -Unique of multi-positions test function, can test devices of BGA package (less than 32X32 arrays); -Put device wantonly, needn't stipulate the direction , four directions are put wantonly; -Choice automatism to FLASH type, just press F5, without your choice headache;

• Publisher: Guangzhou Jingtian Electronics Co., Ltd.
• Last updated: April 15th, 2008

LabTool-48UXP

LabTool-48UXP is an intelligent universal programmer. Main features: - USB or parallel port interface with auto-switch power - Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter. - Less then 2 seconds per Mbit Programming speed for high density flash chip. - No adapter required for DIL chip up to 48-pin.

• Publisher: Advantech Equipment Corp.
• Last updated: April 19th, 2013

ChipBlasterAVR In-System Programmer

ChipBlasterAVR is an Universal Programmer software supporting In-System Programming of chips from the Atmel AVR family of microcontrollers. The program is designed to run under the Windows 2000, XP, Vista and Windows 7 operating systems. Universal In-System Programming Software for the Atmel AVR family of microcontrollers.

• Publisher: HP InfoTech s.r.l.
• Last updated: May 25th, 2012

Dataman-48XPUXP Software

Dataman 48XP/48UXP is a companion app for the DATAMAN 48UXP universal programmer. With this program, you can perform various operations, such as: save the memory buffer to a file, load a file into the memory buffer, save the environment to a project file, load a project file into the system, edit the memory buffer, modify the function test vectors, write the buffer data to the devices, and more.

• Publisher: Dataman Programmers ltd.
• Home page: www.dataman.com
• Last updated: November 30th, 2016

MPC560x Programmer

MPC560x Programmer is a free-to-use flashing tool for MPC560x and SPC560Px0. This app uses the ETL HYPER PROG board to communicate with the target MCU. The ETL HYPER PROG has full Optical Isolated interface to provide maximum safety at time of connection and programming.

• Publisher: ETL
• Home page: www.etlweb.net
• Last updated: February 28th, 2016

Additional Etl universal programmer selection

Universal Programmer

The TekBots Universal Programmer is a graphical application to program a variety of embedded hardware devices. Included protocols are Atmel AVR SPI, JTAG, and Cypress ISSP. The program has a very simple to use interface, with AVR and JTAG modes. In AVR window select the Flash and EEPROM , the programmer and the communication port. After that you have a set of options to configure your device.

• Publisher: Donald Heer
• Last updated: January 10th, 2012

GQ USB Programmer

GQ USB Programmer is an application that lets you burn HEX files to microcontrollers using GQ programming devices. The microcontroller can be automatically determined by the program. The devices supported depend on the programmer hardware connected to PC.

• Publisher: MCUmall Electronics Inc.
• Home page: www.mcumall.com
• Last updated: June 28th, 2015

TopJTAG Flash Programmer

Most of popular parallel NOR flash memories supportedTopJTAG Flash Programmer can work with any parallel NOR flash memory compatible with AMD or Intel standard or extended command sets. Both CFI (Common Flash Interface) and non-CFI memories are supported. Common programming functions providedRead, erase, blank check, program, verify, sector lock/unlock (for Intel memories).

• Publisher: TopJTAG
• Home page: www.topjtag.com
• Last updated: October 9th, 2012

Universal Extractor

Universal Extractor is a program designed to decompress and extract files from any type of archive or installer, such as ZIP or RAR files, self-extracting EXE files, application installers, etc. Universal Extractor is not intended to be a general purpose archiving program. Allows you only to extract files from virtually any type of archive, regardless of source, file format, compression method.

• Publisher: Jared Breland
• Home page: legroom.net
• Last updated: November 3rd, 2022

Haihaisoft Universal Player

Having a multimedia player that supports a large variety of formats is quite a necessity as nobody likes facing incompatibility issues. One example comes from Haihaisoft Universal Player. This easy-to-use multimedia player will let you watch your favorite videos, listen to your music collection and check your photo libraries.

• Publisher: Haihaisoft Limited
• Last updated: May 29th, 2013

H8SX172x Programmer

H8SX172x Programmer lets you program and verify R5F61721, R5F61725, H8SX/1721, and H8SX/1725 microcontrollers with FLASH/EEPROM memory. These microcontrollers control the airbag modules in Toyota, Honda, and Subaru vehicles. This application is quite easy to use; just connect your programmer hardware using USB, select the BIN file and click "Start".

• Publisher: ETL
• Last updated: May 25th, 2015

Universal Document Converter

Universal Document Converter is intended to convert any kind of printable document into an image or a PDF. As many other tools, it works by installing a virtual printer, which you can access from any program that supports printing. Many image output formats are supported, including JPG, PNG, TIFF, GIF, BMP, PCX and DCX.

• Publisher: fCoder SIA
• Last updated: December 26th, 2017

Universal Advance Unlocker

This is an application that allows you to unlock various phones from different brands in order to use them on different networks. For most of the models, the software will generate the unlock code based on an advanced algorithm that uses the IMEI. The connectivity method is through the available COM ports.

• Publisher: Josedavido & Dawood 1208
• Last updated: April 15th, 2013

Programmer's Notepad

Programmer's Notepad is an open-source text editor that I found to be very similar to the more popular Notepad++. In addition to basic text editing tools, it also offers many features that are especially useful for programmers, software testers, etc. It is a small application that runs on all the popular Windows versions.

• Publisher: Simon Steele
• Last updated: June 10th, 2019

Universal Viewer

Universal Viewer is designed for opening a wide range of file formats. It supports major graphic formats including JPG, BMP, ICO, and GIF. You can also open videos, Internet files, and file types supported by Total Commander Lister plugins. No additional software or codec is required for opening files.

• Publisher: UVViewSoft
• Home page: www.uvviewsoft.com
• Last updated: December 8th, 2021