Fluid flow rate in Title/Summary

AioFlo

AioFlo is a hydraulic calculator that can determine either the pipe diameter, fluid flow rate or pressure drop when the other two components are known. The program gives the fluid flows in mass or volumetric terms and viscosity in dynamic or kinematic units.

• Publisher: Katmar Software
• Home page: www.katmarsoftware.com
• Last updated: September 14th, 2014

Design Flow Solutions Evaluation Version

Design Flow Solutions® is a fluid flow software suite which provides the engineer with a range of computer tools to solve fluid flow problems. DFS is a must for the engineering professional who needs fast reliable reference information and solutions.

• Publisher: ABZ, Incorporated
• Home page: www.abzinc.com
• Last updated: November 18th, 2009

Pipe Flow Wizard

Pipe Flow Wizard allows calculating pipe pressure drop and flow rate, being a simple-to-use, accurate and handy “what if” piping calculation solution for both liquids and gases. It comes with a simple interface that allows performing 4 different types of calculations for a single pipe based on known data.

• Publisher: PipeFlow.co.uk
• Home page: www.pipeflow.co.uk
• Last updated: March 17th, 2010

Fluid flow rate in Description

Pipe Flow Advisor

Pipe Flow Advisor is a utility that can help you calculate flow rate, depth or volume for water flowing through pipes, tubes, channels and weirs or the time taken for a tank to empty. The developer specifies it that the results are estimates obtained using the Manning formula, and that more accurate results are obtained with practical measurements.

• Publisher: PipeFlow Software
• Home page: www.pipeflow.co.uk
• Last updated: January 10th, 2009

Condenser Design (CnD)

CnD is a software that is made to demonstrate thermal analysis and design calculations required for designing shell and tube condensers. This software can design, horizontal shell side condensers, horizontal tube side condensers, vertical shell side condensers, vertical tube side condensers and reflux condensers.

• Publisher: WeBBusterZ Engineering Software
• Home page: www.webbusterz.com
• Last updated: September 1st, 2011

NIST FDS and Smokeview

Fire Dynamics Simulator (FDS) is a computational fluid dynamics (CFD) model of fire-driven fluid flow. The software solves numerically a form of the Navier-Stokes equations appropriate for low-speed, thermally-driven flow, with an emphasis on smoke and heat transport from fires. Smokeview (SMV) is a visualization program that is used to display the output of FDS and CFAST simulations.

• Publisher: National Institute of Standards and Technology
• Last updated: March 28th, 2012

Autodesk Simulation CFD 2013

Autodesk Simulation CFD (formerly known as CFdesign) provides fast, accurate, and flexible fluid flow and thermal simulation tools to help predict product performance, optimize designs, and validate product behavior before manufacturing. It lets you generate computational fluid dynamics models upfront in the design process.

• Publisher: Autodesk Inc
• Last updated: April 12th, 2013

AquaSea

AQUASEA for Windows software is a powerful and easy to use finite element program to solve flow in rivers tidal flow problems in estuaries and coastal areas, lake circulation and problems involving transport of mass heat and suspended sediments. First developed in 1985 it has been continuously upgraded since then. It has been used worldwide on the most difficult modeling problems.

• Publisher: Vatnaskil
• Last updated: August 24th, 2010

Additional Fluid flow rate selection

Pipe Flow Expert

Pipe Flow Expert is a program for designing and analyzing complex pipe networks where the flows and pressures must be balanced to solve the system. It features Isometric 3D drawing and standard 2D piping layouts, customized PDF reports, robust calculation engine that can solve complex pipe networks, modelling of up to 1000 pipes with the full license, and more.

• Publisher: Daxesoft Ltd.
• Home page: www.pipeflow.co.uk
• Last updated: February 21st, 2017

Fluid Pressure and Flow

With the help of this program you can explore pressure in the atmosphere and underwater. You can also reshape a pipe to see how it changes fluid flow speed. Moreover the program enables you to experiment with a leaky water tower to see how the height and water level determine the water trajectory.

• Publisher: University of Colorado
• Home page: phet.colorado.edu
• Last updated: March 15th, 2014

Convert123

Convert123 1.0 is a powerful unit and measurement converter that allows you to convert from different units into others in a very easy way. The program will convert any unit of measurement almost automatically. It has got a friendly interface that will guide you on how to convert from one into another.

• Publisher: Daxesoft
• Last updated: March 26th, 2008

EPA SWMM

The EPA Storm Water Management Model (SWMM) is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component of SWMM operates on a collection of subcatchment areas that receive precipitation and generate runoff and pollutant loads.

• Publisher: US EPA
• Last updated: December 29th, 2011

Flow Calculator

Flow calculator is a small, compact and useful tool which helps in doing flow related calculations very easy and fast. The main advantage of this software is its compactness and size. The simple interface only contains three text boxes. These text boxes correspond to the inside diameter of the cylindrical pipe, velocity and the volumetric flow rate.

• Publisher: eesiflo.com
• Home page: www.eesiflo.com
• Last updated: November 17th, 2010

DanCap

DanCap (or Danfoss Capillary Tube Selector) is a utility designed to make calculations related to a capillary tube throttling device for a refrigeration system, with empirical formulas being used for this purpose. According to the developers, the results returned by the utility are start values for optimization, values that are appropriate for the system to function.

• Publisher: Danfoss Compressors GmbH
• Last updated: June 1st, 2008

ASHRAE Duct Fitting Database

This database, available on CD, includes loss coefficient tables for more than 200 round, rectangular, and flat oval duct fittings. Featuring pictorial outlines of each fitting, this CD is useful to design engineers dealing with a variety of duct fittings. For any given fitting, the user may enter the flow rate and fitting information and obtain loss coefficient data and associated pressure loss.

• Publisher: ASHRAE
• Home page: www.ashrae.org
• Last updated: January 25th, 2012

OBDSA Scantool

OBDSA scantool features: -Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). -Clear trouble codes and turn off the MIL ("Check Engine" light) -Display current sensor data.

• Publisher: On Board Diagnostics South Africa
• Last updated: October 21st, 2008

Autodesk Simulation CFD Viewer

Autodesk Simulation CFD software provides comprehensive fluid flow simulation and thermal simulation. The innovative Design Study Environment provides the tools needed to help make valid design decisions. Autodesk Simulation CFD tools simplify and expand simulation to every engineer on the team.

• Publisher: Autodesk
• Last updated: October 31st, 2011

Pipe Flow Calculators

Pipe Flow Calculators is a Java-made desktop application that includes the most frequently used calculators in any pipe flow analysis. It includes tools that will let you calculate pressure drop for known flow rate, calculate flow rate for known pressure drop, perform Darcy friction coefficient calculation, perform minor losses calculation, etc.

• Publisher: Pipeflowcalculations.com
• Home page: pipeflowcalculations.com
• Last updated: October 23rd, 2017