Fpgas en proteus in Title/Summary

Proteus Virtual USB Drivers

Proteus Virtual USB Drivers are required by Proteus VSM USB Simulation with supported microcontrollers. The drivers are installed through the netsh command line.

• Publisher: Labcenter Electronics
• Last updated: May 11th, 2012

Proteus

Proteus combines ease-of-use with powerful features to help you design, test and layout professional PCBs. Main features: - 800 microcontroller variants ready for simulation straight from the schematic. - The Advanced Simulation Features product adds graph based analyses to your Proteus circuit simulation.

• Publisher: Labcenter Electronics
• Last updated: December 28th, 2016

Proteus VX

The Proteus VX is a professional desktop sound module based on the Proteus sound modules and Emulator samplers. It has got features like Phase Locked Stereo signal path, Up to 192 kHz sample rate, 54 different filter types including multi-pole resonant filters, phasers, flangers, vocal filters and multi-parameter morphing filters, etc. Proteus VX is now available as a freeware.

• Publisher: E-MU Systems
• Home page: www.creative.com
• Last updated: March 8th, 2008

Fpgas en proteus in Description

Libero IDE

Libero IDE is a comprehensive software toolset for designing with Microsemi Rad-Tolerant FPGAs, Antifuse FPGAs and Legacy & Discontinued Flash FPGAs and managing the entire design flow from design entry, synthesis and simulation, through place-and-route, timing and power analysis.

• Publisher: Actel
• Last updated: September 1st, 2014

SystemCrafter SC

SystemCrafter SC is a SystemC synthesis tool for Xilinx FPGAs. SystemCrafter SC generates RTL VHDL or Verilog for downstream synthesis to Xilinx FPGAs, and closes the verification gap by writing a structural SystemC output for simulation. SystemCrafter SC - is fully compatible with major C++ compilers, such as Microsoft Visual C++ and GNU GCC;

• Publisher: SystemCrafter
• Last updated: March 7th, 2010

Neuro-Programmer

Neuro-Programmer can change brain wave activity, which is directly connected to your state of mind, using brainwave entrainment. This program is compatible with AudioStrobe devices such as the Procyon, Proteus, and Light & Sound Synergizer. The BioOptimization feature allow you to use biofeedback devices to automatically enhance the effectiveness of the neural stimulation.

• Publisher: Transparent Corporation
• Last updated: October 19th, 2015

Digital Sound Factory Sound Center Orchestral Winds Brass Percu

The most comprehensive collection of high quality royalty free sound collections. Digital Sound Factory products are bundled with the PC Digital Audio Workstation software Sonar 8 by Cakewalk. Digital Sound Factory has remastered the E-MU Proteus and Ensoniq ASR libraries, and also provides high quality instrument libraries for Dimension Pro/LE.

• Publisher: Digital Sound Factory
• Last updated: June 1st, 2013

Multitimbral Control

Multitimbral Control is a simple plugin which allows controlling up to 16 midi channels and so is ideal for a hardware multitimbral sound module. It allows you to take control over Volume, Pan, Program Change (MSB, LSB and Program Number), plus 2 assignable midi Control Changes which are mapped to knobs for overriding a preset.

• Publisher: Homegrown Sounds
• Last updated: May 30th, 2014

Additional Fpgas en proteus selection

Quartus II Web Edition

Quartus II Web Edition FPGA design software includes everything you need to design for the following Altera® FPGA and CPLD families:- Cyclone®, Cyclone II, Cyclone III, Cyclone IV, and Arria® GX FPGAs - All MAX® CPLDs - Arria II GX FPGAs: EP2AGX45 - Stratix® III FPGAs: EP3SE50, EP3SL50, EP3SL70 etc.

• Publisher: Altera Corporation
• Last updated: September 16th, 2011

MAX+plus II BASELINE

The solution that enables the designers to target low-to-mid density FPGAs and CPLDs.

• Publisher: Altera Corporation
• Last updated: March 14th, 2008

Xilinx ISE Design Suite

The available user-customizable IP functions range in complexity from commonly used functions, such as memories and FIFOs, to system-level building blocks, such as filters and transforms. Using these IP blocks can save days to months of design time. The highly optimized IP allows FPGA designers to focus efforts on building designs quicker while helping bring products to market faster.

• Publisher: Xilinx Inc.
• Home page: www.xilinx.com
• Last updated: August 10th, 2023

8051 IDE

8051 IDE is a simple 8051 microcontroller emulator for the 8051 series of microcontrollers, like 8052, 8031, 8751, 8752, etc. The program is very simple to use and is a good one for those beginning to do 16-bit microcontroller programming. It has all the features to edit and run an assembly language program.

• Publisher: AceBus
• Home page: www.acebus.com
• Last updated: March 15th, 2012

FlashPro

The Actel FlashPro programming system is a combination of Actel FlashPro software and a hardware programmer. Together they provide in-system programming (ISP) for all FPGAs in the IGLOO® Series and ProASIC®3 Series (including RT ProASIC3), and the SmartFusion™, Fusion, ProASICPLUS, and ProASIC families.

• Publisher: Actel Corp
• Last updated: March 10th, 2011

TopJTAG Probe

A boundary-scan (JTAG) based simple logic analyzer and circuit debugging software. Provides 1) the ability to monitor pin values in real-time without interference with the normal operation of a working device and 2) to interactively set up pin values for testing of board-level interconnects or on-chip internal logic.

• Publisher: TopJTAG
• Home page: www.topjtag.com
• Last updated: October 9th, 2012

Microsemi FlashPro

The Microsemi FlashPro programming system is a combination of Microsemi FlashPro software and a hardware programmer. Together they provide in-system programming (ISP) for all FPGAs in the IGLOO2, SmartFusion2, RTG4, IGLOO® Series and ProASIC3 Series (including RT ProASIC3), and the SmartFusion, Fusion, ProASICPLUS, and ProASIC families.

• Publisher: Microsemi Corporation
• Last updated: December 4th, 2015

Quartus Prime Standard Edition

The new revolutionary Quartus® Prime design software includes everything you need to design for Altera® FPGAs, SoCs, and CPLDs. The Quartus Prime software is available in three editions based on your design requirements: Pro, Standard, and Lite Edition.

• Publisher: Altera Corporation
• Last updated: March 9th, 2016

XJTAG

XJTAG provides high-end, professional hardware and software boundary scan products to speed up circuit design and development, through to production test and field maintenance. We can offer you a full range of JTAG products to help you debug board designs with BGAs, test hardware that includes FPGAs, CPLDs, DSPs or microprocessors, detect faults and prove your design quickly and easily.

• Publisher: Twentyone
• Last updated: May 23rd, 2012

Altera SDK for OpenCL

The Altera SDK for OpenCL allows the easy implementation of applications onto FPGAs by abstracting away the complexities of FPGA design, allowing software programmers to write hardware-accelerated kernel functions in OpenCL C, an ANSI C-based language with additional OpenCL constructs.

• Publisher: Altera Corporation
• Last updated: June 30th, 2015