Frequency domain editor in Title/Summary
Elecraft Frequency Memory Editor
The Elecraft Frequency Memory Editor helps you maintain frequency memories using a spreadsheet format. Memories can be recalled using K3, K3S, and KX3’s M>V switch or the memory editor’s “QSY” buttons. Once memories are stored in your K3, K3S, and KX3, you can disconnect the K3, K3S, and KX3 from the PC.
- Publisher: Elecraft
- Last updated: January 31st, 2017
MiPower
Designed to assess the risk of Voltage instability and margin of stability during sudden disturbances, under steady state conditions. It ranks the load busses based on the L-index value and the highest L-index indicates the system collapse point. The value of L-index is zero at no load and 1 at the verge of collapsing point.
- Publisher: PRDC
- Home page: www.prdcinfotech.com
- Last updated: January 23rd, 2010
Spectramag-6
Spectramag-6 software collects and displays data in both the time and frequency domain to frequencies up to 3.5kHz, with a range of filtering and FFT options available. It is a very helpful program. If you want to use the portable six-channel 24-bit data acquisition unit, this is a must have tool.
- Publisher: Bartington Instruments
- Last updated: February 15th, 2012
Frequency domain editor in Description
TFD Scope
TFD Scope allows you to graph any signal read from the input of the sound card in real time. You can connect a Microphone, but as the input of the sound card has a left and right channel, you can read different signals, one signal per channel. The signals are shown in a time-domain graph as an oscilloscope and in a frequency-domain graph. You can change the amplitude and the time base.
- Publisher: AdroSoft
- Home page: www.adrosoft.com
- Last updated: January 25th, 2022
DaqView
DaqView allows you to verify signal connections, acquire and save data to disk, and graphically view real-time data within moments of taking your IOtech hardware Out-of-the-Box. Easily set up all of your hardware, acquisition, and display parameters without programming via a simple spreadsheet-style screen.
- Publisher: IOtech
- Home page: www.mccdaq.com
- Last updated: March 26th, 2011
Lumerical INTERCONNECT
Lumerical INTERCONNECT is a photonic integrated circuit design environment for the analysis of integrated optical circuits, silicon photonics and optical interconnects. Time domain simulation is performed using a data flow system simulator, allowing for more flexibility than traditional discrete time or time-driven simulators.
- Publisher: Lumerical Solutions, Inc.
- Home page: www.lumerical.com
- Last updated: June 28th, 2015
UltimaSound
With UltimaSound spectrogram software and a laptop, you can see a vivid picture of your voice and music in frequency domain in real time! This is a great project for science fair and science class teaching in middle/high school to visually demonstrate the elements of sound: frequency, amplitude, pattern, spectrum.
- Publisher: Ultimaserial
- Home page: www.ultimaserial.com
- Last updated: May 26th, 2020
WinSpec32
Winspec32 provides the functionality of an audio frequency spectrum analyser on a multimedia Windows 95 computer. It provides both time and frequency domain displays of audio data captured by a standard sound card. It has been written to aid in the teaching of Fourier analysis and FFTs. It is, however, a fully functional spectrum analyser that can be used for a number or real-world applications.
- Publisher: Sonic Spot
- Last updated: November 23rd, 2011
Additional Frequency domain editor selection
Multi-Instrument
Multi-instrument is a suite of tools that includes an oscilloscope, a signal generator, a multimeter and a spectrum analyzer. The product is intended for professional use and requires special hardware, except for the oscilloscope, which can get data directly from your sound card. The built-in tools can perform various types of analysis in the domains of time, frequency and time-frequency.
- Publisher: Virtins Technology
- Home page: www.virtins.com
- Last updated: November 18th, 2024
Filter Design
Filter design, using AADE Filter Design, consists of five phases: Engineering Specifications, Synthesis, Analysis, Plot, Optimization. You can enter a schematic and parts list from a book or magazine for analysis or modification. Insert a filter in front of an existing filter or Append a filter to the end of an existing filter
- Publisher: Almost All Digital Electronics
- Last updated: May 3rd, 2008
PSP Neon
PSP Neon is a fully featured linear phase equalizer plug-in (VST, RTAS and AAX for Windows and AudioUnit, VST, RTAS and AAX for OSX) that offers eight bands of equalization, each of which can be assigned one of seven filter types. It uses frequency-domain fast convolution based linear phase algorithms for the best balance between CPU efficiency and phase accuracy.
- Publisher: PSPaudioware
- Last updated: June 19th, 2014
EASERA SysTune
SysTune represents a remarkable step forward in its ability to take accurate acoustical measurements in real time even when an audience is present. It acquires Impulse Response data using live program material and simultaneously displays time-domain and frequency-domain measures in real time and automatically produces accurate, repeatable measurements.
- Publisher: AFMG
- Home page: systune.afmg.eu
- Last updated: January 25th, 2010
AnarchyEffects VST Plug-Ins
Anarchy Effects VST Plug-Ins is a cross-platform bundle consisting of 5 audio plugins, each of which does a different novel form of frequency domain processing. It includes a SpectralAutopan, Corkscrew, HarmonicAdder, LengthSeparator and Convoluter. It also features a parameter automation using MIDI controllers or VST automation.
- Publisher: Anarchy-Rhythms
- Last updated: July 2nd, 2014
Control System Toolbox
Control System Toolbox™ provides industry-standard algorithms and tools for systematically analyzing, designing, and tuning linear control systems. You can specify your system as a transfer function, state-space, pole-zero-gain, or frequency-response model.
- Publisher: The MathWorks, Inc.
- Home page: www.mathworks.com
- Last updated: November 16th, 2009
SD-DataViewer
The SD-Data Viewer opens this file and represents the current and the voltage's signals as graphics in time and frequency domain. Through the markers, it is also possible to give more precisely measurements in a similar way that oscilloscope does. It permits the harmonic's spectrum calculation too.
- Publisher: ABB
- Home page: www.abb.com
- Last updated: April 5th, 2010
aHRV Analysis
Nevrokard SA-aHRV is a program for the Heart Rate Analysis in small animals. It features frequency domain analysis of up to 5Hz and a resampling rate of 10Hz. This application intended for use in animals having a considerably higher heart rate than human subjects.
- Publisher: Nevrokard
- Home page: www.nevrokard.eu
- Last updated: January 23rd, 2016
Ansoft Maxwell (64-bit)
ANSYS Maxwell is the premier low frequency electromagnetic field simulation software for engineers tasked with designing and analyzing 2-D and 3-D electromagnetic and electromechanical devices, including motors, actuators, transformers, sensors and coils. Maxwell uses the accurate finite element method to solve static, frequency-domain, and time-varying electromagnetic and electric fields.
- Publisher: ANSYS
- Last updated: April 11th, 2012
UltimaSound II
With UltimaSound spectrogram software and a laptop, you can see a vivid picture of your voice and music in frequency domain in real time. The application is easy to install, easy to use and has a friendly user interface. This utility can be used for science fair and teaching in middle/high school to better understand the elements of sound/voice/music: frequency, amplitude, pattern, spectrum.
- Publisher: Ultimaserial
- Home page: www.ultimaserial.com
- Last updated: May 27th, 2020
