Ham radio visio stencils in Title/Summary

FMC-Visio Stencils

The FMC Stencils are templates and extensions to existing general purpose drawing applications like Visio or OpenOffice Drawing. This offers basic tool support for creating Fundamental Modeling Concpets (FMC) diagrams like Block diagrams, Petri nets and Entity-Relation diagrams (ERD).

• Publisher: Free Software Foundation, Inc.
• Last updated: April 25th, 2012

Ham Radio Deluxe

Ham Radio Deluxe provides a customizable interface to control your amateur transceiver using its built-in computer aided control interface.Main features: - Supports most CAT capable radios. - Supported Radios (click here). - Allows total station control. - BandScope. - Favorites provide memories for all radios.

• Publisher: Ham Radio Deluxe, LLC.
• Last updated: August 10th, 2023

JTDX - JT9 and JT65 Modes for LF MF and HF Amateur Radio.

JTDX is an open source HAM radio program for HF JT65 and JT9 modes. It comes with optimal candidate selection logic, and four/five pass decoding & decoders based on the matched filters making JTDX performance quite different from WSJT-X software for operation on the HF bands.

• Publisher: Igor Chernikov, UA3DJY
• Home page: www.qrz.lt
• Last updated: February 20th, 2017

Ham radio visio stencils in Description

NuTest

Obtain or upgrade your amateur radio licence using this complete training package. Create tests from the official ARRL question pools. Browse the question pools. Read in-depth explanations of each question. FCC Part 97 rules included.

• Publisher: Nu-Ware
• Last updated: May 26th, 2020

MMSSTV

MMSSTV is an amateur radio (or ham radio) application aimed, of course, at those interested in radio techniques. With this SSTV (slow scan television) utility, images can be sent and received using a computer, a keying circuit and a ham radio. The ham radio can be VHF or HF.

• Publisher: JE3HHT - Makoto Mori
• Home page: hamsoft.ca
• Last updated: September 27th, 2010

Log4OM

Log4OM is a fast and efficient software developed in C# for complete ham radio station management. Log4OM modern user interface runs on PC, Windows tablet and can be started also from a USB key with limited resources. Software focused on Ham Radio activity and requires very low resources from the host computer.

• Publisher: IW3HMH
• Home page: www.log4om.com
• Last updated: October 2nd, 2017

Radio Operations Center SC for Kenwood

The Radio Operations Center (ROC) is a comprehensive suite of full-featured software solutions for commercial radio, amateur (Ham) radio, MARS and marine radio control. ROC is the only 32-bit Windows software available for operating TNCs in host mode as well as soundcard support for all the digital radio modes.

• Publisher: Creative Services Software, Inc
• Last updated: November 16th, 2011

Radio Operations Center SC for Icom

The Radio Operations Center (ROC) is a comprehensive suite of full-featured software solutions for commercial radio, amateur (Ham) radio, MARS and marine radio control. ROC is the only 32-bit Windows software available for operating TNCs in host mode as well as soundcard support for all the digital radio modes.

• Publisher: Creative Services Software, Inc
• Last updated: May 24th, 2012

Additional Ham radio visio stencils selection

MixW

MixW is a multi mode and multi functional program designed for every day logging and contests. It has many useful features that make your QSO logging process almost an automatic procedure. It proposes the Telnet dialog with talk over DxCluster support and a possibility to have a backup copy of your log on a server.

• Publisher: MixW Team
• Last updated: January 12th, 2011

HamSphere

HamSphere is a virtual shortwave tranceiver client that works in Windows, Linux or Mac or any other Java driven system. It communicates over a simulated Ionosphere called "HamSphere". It covers 6m to 160m Ham band including 11m. It uses double side band modulation and each band is 100 kHz wide.

• Publisher: Kelly Lindman (5B4AIT)
• Home page: www.hamsphere.com
• Last updated: December 8th, 2012

N1MM Logger+

N1MM Logger+ is a ham radio contest logging program for CW, phone and digital modes. All major and many minor HF Contests are supported including General DX logging, DXpedition, DXSatellite and VHF DX. Also, it provides Rover support for QSO parties and other contests which support this.

• Publisher: Tom, N1MM
• Last updated: February 2nd, 2017

MULTIPSK

MULTIPSK is a multimode digital transceiver application. The program works with a lot of parameters which can be modified by the user. The program proposes a set of AUTEX modes created by the author and, consequently, specific to Multipsk. AUTEX is a mode allowing meeting at 2, 4, 7 or 13 Hams.

• Publisher: F6CTE
• Home page: f6cte.free.fr
• Last updated: July 18th, 2023

CQ100

QsoNet is a new system which uses the internet to receive audio signals from a ham radio transmitting station, then instantly reflects the audio back to all stations listening on that frequency. The result is a simulated ionosphere for worldwide amateur radio communication.

• Publisher: QsoNet
• Home page: www.qsonet.com
• Last updated: May 23rd, 2008

Win-Test

Win-Test is the new contest logging software written by Olivier F5MZN, the author of Editest (a reference in French contests logging software, now deprecated), and of DXNet, an Open Source DX Cluster system. Win-Test manages all features included in the advanced mode of the SO2R interfaces EZMaster from Ham Radio Solutions (I4UFH) and MK2R from Microham (OM7ZZ) with only one USB cable!

• Publisher: Olivier F5MZN
• Home page: www.win-test.com
• Last updated: December 28th, 2017

Spectrogram

A freeware dual channel audio spectrum analyzer for Windows 95 which can provide either a scrolling time-frequency display or a spectrum analyzer scope display in real time for any sound source connected to your sound card. Version 4.2.0 replaces 4.1.2 and adds useful new features including spectrum averaging for noise reduction and more flexible scanning and recording capabilities. Spectrogram is ideal for any purpose related to sound spectrum analysis including analysis and identification of biological sounds, analysis and identification of human speech, analysis of musical performances, tuning of musical instruments, evaluation and calibration of home audio systems, and HAM radio audio reception and tuning.

• Publisher: Visualization Software LLC
• Last updated: May 7th, 2008

Signal Hound

The Signal Hound spectrum analyzer and measurement receiver is compact and simple to use. It has become a popular tool for general lab use, electronic repair technicians, engineering students, ham radio enthusiasts, and electronics hobbyists alike. Although it is small and affordable, theUSB has the sensitivity, accuracy and dynamic range you’d expect in a unit many times its cost.

• Publisher: Test Equipment Plus
• Last updated: November 29th, 2012

DX ToolBox

DX Toolbox is a program that searches the web for you, gathering information on solar and geomagnetic conditions that affect radio propagation. Also, it features several propagation forecasting tools, allowing you to quickly and easily estimate current HF (Shortwave) propagation conditions between any two locations in the world.

• Publisher: Black Cat Systems
• Home page: www.blackcatsystems.com
• Last updated: June 16th, 2023

IP-Sound

IP-Sound is a Free application for audio exchange client to client over a TCP/IPv4 network (Lan/Internet). The main purpose for the existence of IP-Sound is to provide low quality audio 8-16kHz, with low latency for use together with remote control software for "ham" radio amateur equipment. IP-Sound is developed by SM5VXC.

• Publisher: SM5VXC
• Home page: www.dxzone.com
• Last updated: May 2nd, 2008