Hvac demolition estimating in Title/Summary

PRO-EST HVAC

Pro-Est HVAC is Professional Estimating Systems complete HVAC estimating program which includes pipe, sheet metal and an excel recap sheet. It’s comprehensive, affordable, user friendly and flexible. It works on 32 and 64 bit processors and on windows XP, Vista and WIN 7 operating systems.

• Publisher: Professional Estimating Systems
• Last updated: June 3rd, 2011

Block Load

Carrier's Block Load program is a powerful, fully featured HVAC load estimating program suitable for commercial buildings of any size. Block Load is a tool for consulting engineers, design/build contractors, HVAC contractors, facility engineers and other professionals involved in the design, analysis or installation of commercial building HVAC systems.

• Publisher: Carrier Corporation
• Home page: www.commercial.carrier.com
• Last updated: April 19th, 2008

Demolition City

Demolition City is an interesting action game for free. Demolish buildings all over the world. Strategically place different explosives on a building or tower and take it down under the goal line. Watch out for falling debris causing too much damage to the surrounding environment. Build custom buildings that you can share with your friends in the editor.

• Publisher: NowStat
• Last updated: March 3rd, 2010

Hvac demolition estimating in Description

2013 National Heavy Construction Estimator

National Heavy Construction Estimator includes thousands of cost estimates you won’t find anywhere else, and in-depth coverage of demolition, hazardous materials remediation, tunneling, site utilities, precast concrete, structural framing, heavy timber construction, membrane waterproofing, industrial windows and doors.

• Publisher: Craftsman Book Company
• Last updated: May 23rd, 2014

Demolition Company

Demolition Company is a game in which you do nothing else but demolish buildings and structures, using anything you can, from hand tools to excavators and even C4 explosives. The visuals are decent, neither impressive, nor embarrassing. The controls are also rather average, neither too precise, nor too clunky either. And the gameplay is as simple as it can get.

• Publisher: GIANTS Software
• Last updated: May 28th, 2010

H-Tools

HVAC Tools program allows the quick calculation of 13 common HVAC design tasks. These tasks include duct sizing, wire sizing, three way coil interpolation, mixed air and state point psychrometrics, fan curve and cost analysis, U-Factor calculations, natural gas pipe sizing, refrigeration line sizing, general pipe sizing, hot/chilled water pipe analysis..

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: January 28th, 2013

Quote IT Estimating Software

QuoteIT software enables companies to manage critical business functions including: quotes, estimates, customers, sales and executive information and data. Users can track costs, price, create assemblies, view history, email and calculate.

• Publisher: MIE Solutions
• Last updated: September 9th, 2011

MEI Steel Estimating Software

Features -Easy to use interface for material entry -Customizable database preloaded with AISC material -Coating and shaping capability -Easy entry and selection of buyout, joist and decks quotes -Job summary information including total weight, total profit and material breakdown -Audit capability to locate errors before they cost you money -Sorted material list -Scope sheet generation

• Publisher: MEI Steel
• Last updated: April 7th, 2012

Additional Hvac demolition estimating selection

Open Book HVAC Certifications

Open Book HVAC Certifications software is a freeware testing software. This is intended to provide you with new study tools and the means to take your A/C certification tests right from home. You may use this program even without an Internet connection.

• Publisher: Mainstream Engineering Corporation
• Last updated: November 1st, 2010

HVAC Solution - Taco Hydronic System Solutions

Taco Hydronic System Solutions is a set of tools for hydronic system design. It can be used to design and compare HVAC systems, eliminate recalculation time for changes, calculate plant total loads and flows, size pipe and equipment, select and schedule equipment, and make design changes quickly.

• Publisher: Taco Inc.
• Last updated: October 8th, 2018

HVAC Solution - Pro

HVAC Solution is a schematic diagramming and database tool for laying out the equipment involved in an HVAC system. It lets you draw HVAC air flow and hydronic schematics using hundreds of components. It supports water, propylene glycol, ethylene glycol, and steam.

• Publisher: Elite Software Development, Inc.
• Last updated: November 5th, 2019

QuoteExpress

QuoteExpress Sheet Metal Estimating includes an accurate and customizable labor database derived from extensive per piece construction labor studies performed over ten years. QuoteExpress Piping also includes MCAA / PHCC labor or optional user-customizable labor.

• Publisher: Software Advice, Inc.
• Last updated: March 19th, 2013

HVAC Tools

The HVAC Tools program allows the quick calculation of HVAC design tasks. These tasks include duct sizing, wire sizing, three way coil interpolation, mixed air and state point psychrometrics, fan curve and cost analysis, U-Factor calculations, natural gas pipe sizing, refrigeration line sizing and others.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: December 16th, 2014

Bumpercars Demolition

The purpose of the game is to defeat the opponents of carts times hit-hit and be the last player who is on track. Use the arrow keys to drive your car: Up to accelerate, Down to brake and back, Left and Right to turn. Take the speed and find the right path to hit your opponent fast.

• Publisher: NowStat
• Last updated: November 17th, 2009

DriveWizard HVAC

DriveWizard HVAC is a program designed to make commissioning and troubleshooting of Yaskawa drives as simple as possible. DriveWizard HVAC provides user-friendly tools for viewing, manipulating, and exchanging data with the drive. Data can be retrieved, changed, stored, and graphed. The program is compatible with the Z1000, Z1000U, E7, V1000 and V1000-4X.

• Publisher: Yaskawa America, Inc.
• Home page: www.yaskawa.com
• Last updated: March 20th, 2015

Demolition Master 3D

Demolition Master 3D is one of those rare games in which you utilize the power of explosive forces to create ordered destruction. It’s interesting, thoughtful, and requires precision in order to succeed. Other than some annoying control issues, Demolition Master 3D is a puzzle game worth checking out.

• Publisher: Shockwave.com
• Home page: www.shockwave.com
• Last updated: December 2nd, 2011

2015 National Plumbing & HVAC Estimator

2015 National Plumbing & HVAC Estimator is a program that provides manhours, labor and material costs for all common plumbing and HVAC work in residential, commercial, and industrial buildings. You can quickly work up a reliable estimate based on the pipe, fittings and equipment required.

• Publisher: Craftsman Book Company
• Last updated: March 27th, 2015

Cost-It Automatic take-off and estimating

Cost-It Automatic take-off and estimating is a program that allows you to get the full bidding documentation from the Autodesk Revit model. The plug-in generates the bill of quantities and the priced estimate from the information contained in the BIM model, with all the data and specifications required to assign unit prices, prepare tender documents and check the project.

• Publisher: Presto (SOFT S.A.)
• Last updated: May 29th, 2015