Import from pipe flow advisor in Title/Summary

Pipe Flow Advisor

Pipe Flow Advisor is a utility that can help you calculate flow rate, depth or volume for water flowing through pipes, tubes, channels and weirs or the time taken for a tank to empty. The developer specifies it that the results are estimates obtained using the Manning formula, and that more accurate results are obtained with practical measurements.

• Publisher: PipeFlow Software
• Last updated: January 10th, 2009

Pipe Flow Wizard

Pipe Flow Wizard allows calculating pipe pressure drop and flow rate, being a simple-to-use, accurate and handy “what if” piping calculation solution for both liquids and gases. It comes with a simple interface that allows performing 4 different types of calculations for a single pipe based on known data.

• Publisher: PipeFlow.co.uk
• Home page: www.pipeflow.co.uk
• Last updated: March 17th, 2010

Pipe Flow Energy

The Pipe Flow Energy software estimates the energy used in a pumping system when selecting different pipe sizes. Choosing pipe sizes that give fluid velocities within the recommended ranges detailed within the System Efficiency Guide is important to produce a more efficient system that will save energy usage.

• Publisher: Daxesoft Ltd.
• Home page: www.pipeflow.co.uk
• Last updated: June 29th, 2008

Import from pipe flow advisor in Description

Pipe Flow Calculators

Pipe Flow Calculators is a Java-made desktop application that includes the most frequently used calculators in any pipe flow analysis. It includes tools that will let you calculate pressure drop for known flow rate, calculate flow rate for known pressure drop, perform Darcy friction coefficient calculation, perform minor losses calculation, etc.

• Publisher: Pipeflowcalculations.com
• Home page: pipeflowcalculations.com
• Last updated: October 23rd, 2017

Pipe Flow Expert

Pipe Flow Expert is a program for designing and analyzing complex pipe networks where the flows and pressures must be balanced to solve the system. It features Isometric 3D drawing and standard 2D piping layouts, customized PDF reports, robust calculation engine that can solve complex pipe networks, modelling of up to 1000 pipes with the full license, and more.

• Publisher: Daxesoft Ltd.
• Last updated: February 21st, 2017

FlowMaster

FlowMaster helps you perform hydraulic calculations for dozens of element types, from pipes and open channels to drop inlets and weirs. FlowMaster improves design productivity, ultimately saving project costs. Main Features: - Solve for any unknown property - Design for any desired characteristic - Produce detailed reports and rating curves on the fly

• Publisher: Bentley Systems
• Last updated: April 7th, 2010

ProsimgraphsPro

Prosimgraphspro contains a series of applications useful to simulate processes, draw chemical diagrams. Easy to use applications for the designer.Ideal for engineering, scientific professionals, students and education.

• Publisher: ChemEng Software Design
• Home page: www.cesd.com
• Last updated: July 18th, 2023

Pixelplan - Flow Architect Studio 3D

Flow Architect Studio 3D is a software package for design and presentation. It enables you to design and visualize in 3D, any scene you need for example buildings, interiors, spaces or your products. Flow helps you to present your work to others with screenshots, movies, and a real-time virtual 3D walkthrough.

• Publisher: Pixelplan S.C.
• Last updated: April 23rd, 2018

Additional Import from pipe flow advisor selection

AFT Fathom

AFT Fathom is fluid dynamic simulation software for engineers, used to calculate pressure drop and flow distribution in liquid and low velocity gas piping and ducting systems. Main features: - Advanced hydraulic solver using Newton-Raphson matrix methods. - Detailed modeling for centrifugal and positive displacement pumps. - Integrated graphing and reporting.

• Publisher: Applied Flow Technology
• Last updated: November 23rd, 2015

HCALC

HCALC™ solves for head loss, diameter, flow, pipe area, velocity, Reynolds number and friction factor using the Darcy-Weisbach, Hazen-Williams or Manning's equations. HCALC converts values between various common units. Run HCALC as a stand alone application or have it load at startup and always be available on system tray. A very useful tool for engineers.

• Publisher: Tahoe Design Software
• Home page: www.tahoesoft.com
• Last updated: May 26th, 2020

AFT Fathom Client

AFT Fathom provides comprehensive, incompressible pipe flow analysis and system modeling capabilities combined with ease-of-use. Addressing open and closed loop systems, AFT Fathom includes a built-in library of fluids and fittings, variable model configurations, pump and control valve modeling and much more.

• Publisher: Applied Flow Technology
• Last updated: December 28th, 2009

Double Pipe Heat Exchanger Design

DHex is a software tool that is made to demonstrate the chemical design calculations of Double pipe (hairpin) Heat Exchangers.The software will do all the thermal calculations involved in the design and will generate a summary of all results..etc

• Publisher: WeBBusterZ Engineering Software
• Last updated: April 5th, 2023

Flow Calculator

Flow calculator is a small, compact and useful tool which helps in doing flow related calculations very easy and fast. The main advantage of this software is its compactness and size. The simple interface only contains three text boxes. These text boxes correspond to the inside diameter of the cylindrical pipe, velocity and the volumetric flow rate.

• Publisher: eesiflo.com
• Last updated: November 17th, 2010

Label Flow

Directly connect to any existing database via a live connection and integrate with existing inventory systems without any import or export. Print barcode labels in the background from a third party software or web application using the command line utility.

• Publisher: Jolly Technologies
• Home page: www.jollytech.com
• Last updated: November 7th, 2017

PIPE-FLO Professional

PIPE-FLO Professional is a comprehensive piping system analysis package that provides you with a clear picture of the design and operation of your entire piping system. PIPE-FLO Professional provides a total picture of the piping system including the steady state flow rates and pressures throughout the system, along with the interaction of pumps, control valves, and flow meters.

• Publisher: Engineered Software, Inc.
• Last updated: January 14th, 2015

SketchUp Import for AutoCAD

SketchUp Import 2013 is a free plug-in that offers you two ways to get SKP files into your AutoCAD drawings. You can use the IMPORTSKP command to convert a SketchUp file, stored in a local or shared folder and insert the model into the current drawing. You can also use the GETMODEL command to browse or search the Google 3D Warehouse and download SketchUp models directly into your drawing.

• Publisher: Autodesk
• Last updated: April 3rd, 2013

S-Pipe

S-Pipe is a program that offers you built-in pipe and fitting data, the flexibility to let you enter your own data and direct links with 32-bit Autodesk Building Systems and 32-bit AutoCAD MEP. You can sizes both hot and cold water supply systems using the ASHRAE and ASPE procedures.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: January 30th, 2018

Fluid Pressure and Flow

With the help of this program you can explore pressure in the atmosphere and underwater. You can also reshape a pipe to see how it changes fluid flow speed. Moreover the program enables you to experiment with a leaky water tower to see how the height and water level determine the water trajectory.

• Publisher: University of Colorado
• Last updated: March 15th, 2014