Podnova Player  Windows library  Podnova home
Multimedia | Business | Messengers | Desktop | Development | Education | Games | Graphics | Home | Networking | Security | Servers | Utilities | Web Dev | Other
License: All
Sort by: Relevance

Kpg-60d kenwood in Title/Summary

KENWOOD ARCP-480

KENWOOD ARCP-480

This application can be used to edit, save, and export the TS-480 information such as Memory, Menu, and Auto Mode frequencies. It can be with the Kenwood Network Command System for remote operation of the TS-480. You are also able to write the configured data on the PC to the transceiver.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: July 13th, 2012
Radio Operations Center SC for Kenwood

Radio Operations Center SC for Kenwood

The Radio Operations Center (ROC) is a comprehensive suite of full-featured software solutions for commercial radio, amateur (Ham) radio, MARS and marine radio control. ROC is the only 32-bit Windows software available for operating TNCs in host mode as well as soundcard support for all the digital radio modes.

  • Publisher: Creative Services Software, Inc
  • Last updated: November 16th, 2011
KENWOOD DRIVE-VIEW PLAYER

KENWOOD DRIVE-VIEW PLAYER

KENWOOD DRIVE-VIEW PLAYER is a tool that allows you to view the videos recorded on the KCA-DR300 GPS integrated dashboard camera. By default, the program shows the calendar and the file list in the right. It includes a G sensor chart that displays data in 3-axis waveform about the car's shift forward/backward, to the right/left, and upward/downward.

  • Publisher: JVCKENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: November 20th, 2016

Kpg-60d kenwood in Description

RCV7

RCV7

RCV7 is a Rig Control Software for Kenwood's TM-V7 FM Dual Band Transceiver. Connect your Kenwood PG-4S PC interface cable to the PC and the radio. Turn on the radio. The radio will sense the presence of the data cable and switch the radio data connection from audio (TNC) to data (PC) mode.

  • Publisher: Mike McLendon
  • Last updated: October 24th, 2011
ARVP-10

ARVP-10

This software is a VoIP program for the KENWOOD NETWORK COMMAND SYSTEM. When the ARVP-10 does not work on your PC, OS, or network environment, you may use a commonly-used VoIP software (such as a P2P telephony software) for making voice communications via a network instead of the ARVP-10.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: October 27th, 2011
ARCS III

ARCS III

ARCS III is a CAT control system for the Kenwood TS-2000. The free rig control program controls most functions of the radio and provides features Kenwood forgot to include. MS Translate helps translate Amateur Radio technical talk and conversation. The tool is experimental and requires an Internet connection for some functions.

  • Publisher: Stephen J. Gradijan, WB5KIA
  • Home page: www.qsl.net
  • Last updated: January 30th, 2018
Mcp-d700

Mcp-d700

This program is for editing "Memory Channels", "APRS"(*1), "SKY COMMAND II"(*2) and various settings on the KENWOOD amateur radio TM-D700. To write data to or read the data from the TM-D700 memory, an RS-232C straight cable is required. (With 9-pin female connector for the TM-D700 COM connector).

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: March 8th, 2008
MCP-D7G

MCP-D7G

This program is for editing "Memory Channels", "APRS", "SKY COMMAND II" and various settings on the KENWOOD amateur radio TH-D7A(G)/D7A(G2.0)/D7E(G2.0).To write to or read from the TH-D7 memory, a separate connector cable PG-4W(option) is required.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: March 8th, 2008

Additional Kpg-60d kenwood selection

MCP-1A

MCP-1A

You can use the MCP-1A to create data such as memory channels and menus on a PC by connecting the TH-K2/K4, TM-271/471/281/481 to the PC by using an optional Programming Cable PG-4Y / KPG-22U (for the TH-K2/K4) or KPG-46A / KPG-46U (for the TM-271/471/281/481).

  • Publisher: KENWOOD Corporation
  • Last updated: February 6th, 2012
MCP-2A

MCP-2A

You can use the MCP-2A to create data such as memory channels and menus on a PC by connecting the TM-V71A/E, TM-D710A/E, and the RC-D710 to the PC. By utilizing this software, you can enjoy the versatility of the TM-V71A/E, TM-D710A/E transceivers, and the RC-D710 control panel through the memory channel management or edit functions.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: December 26th, 2013
ARCP-590

ARCP-590

ARCP-590 is the control software for the TS-590S transceiver. It is used to control the TS-590S via a PC. The transceiver data, such as the memory, the menu, and the Auto Mode frequency, can be edited and saved using a PC via this software, and the data can also be written to the transceiver.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: March 25th, 2015
MCP-F6F7

MCP-F6F7

By utilizing this software, you can enjoy the versatility of the TH-F6/ F7 transceivers through the memory channel management and edit functions. -This software runs on Windows® 98, Windows® Me, Windows® 2000 (SP3 or later) or Windows® XP (SP1 or later) operating system. -To install this software, 1.2 MB or more of hard disk space is required.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: April 2nd, 2008
MCP-F6/F7

MCP-F6/F7

With this program you can configure KENWOOD transceivers through the memory channel management or edit functions. You can use the MCP-F6/F7 application to create data such as memory channels and menus on a computer by connecting the TH-F6A/F7A/F7E to the PC.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: July 1st, 2014
ARUA-10

ARUA-10

ARUA-10 is the software used to connect TS-990S, TS-590SG, or TS-590S transceivers and a PC with a USB cable and make it possible to use a speaker and a microphone on your computer instead of those on the transceiver. This app also has an intuitive interface.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: August 7th, 2015
KAS-10

KAS-10

Other enhancements include Expanded Mobile ID Capacity up from 250 to 999 IDs, Microsoft MapPoint 2006/2010 European Maps conpatibility, works with Windows 7,custom WAV file import, 5-Tone & FleetSync voice calls.AVL operation requires GPS installation in mobiles or KMC-47GPS/48GPS Speaker Mics with portables.

ARHP-590

ARHP-590

This software is to interface between the ARCP-590, Radio Control Program installed and run on a PC connected to a network, and the Kenwood TS-590S transceiver. The command interface can be accessed from within a LAN or via a high-speed broadband connection.

  • Publisher: KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: January 6th, 2012
MCP-5A

MCP-5A

MCP-5A creates data such as memory channels and menus on a PC by connecting the TH-K20/K40 to the PC by using an optional Programming Cable PG-4Y (RS-232 interface) or KPG-22U. The program can import the TPE / CSV format files which are exported by using the TravelPlus For Repeaters program available from ARRL.

  • Publisher: JVC KENWOOD Corporation
  • Home page: www.kenwood.com
  • Last updated: May 5th, 2012
NaP3

NaP3

NaP3 is a pan-adapter display program based on a combination of PowerSDR/IF from WU2X and PowerSDR v2.1.6 from Flex Radio. It communicates with the rig through LP-Bridge or LPB2, which greatly extends the capability of the rig by allowing multiple applications to easily connect to the rig and share its serial port.

  • Publisher: Pete Connors, F5VNB
  • Home page: www.telepostinc.com
  • Last updated: October 30th, 2014
Related topics Trending topics

© Podnova Windows Library, 2024
Privacy • Cookie policy • Submit • Contact