Laptop parallel port cnc driver in Title/Summary

Parallel Port PIC Programmer

Parallel Port PIC Programmer uses PC's parallel port for communication between the programming software and simple PIC programmer hardware. OshonSoft.com Parallel Port PIC Programmer software is very easy to use and works on all Windows platforms. Simulator IDE should also be installed on your PC prior to using this programming software.

• Publisher: Oshon Software
• Last updated: April 1st, 2008

Lalim Parallel Port Control

Most of engineering industry using PC to control hardware with using additional I/O card but with Lalim Parallel Port Control you can use your default printer port controlling external device such as switching on/off light or control electronic devices. What does this program [does is] trigger the parallel port (Printer port) 's data pin by your command.

• Publisher: Lalim Software
• Last updated: September 12th, 2008

Lalim Parallel Port Control Professional

Lalim Parallel Port Control can control hardware through the parallel port (printer port) and can also control a remote PC parallel port through a network. Lalim Parallel Port Control requires a certain knowledge of electronics and if you are not comfortable with a soldering iron, or don't know what a 1k resistor is, then it is probably advisable that you do not attempt to use this program.

• Publisher: Lalim Software
• Last updated: December 6th, 2008

Laptop parallel port cnc driver in Description

GE-Flash

GE-Flash is a complete X2212/X2444 programming system for programming Phoenix, Delta and Ranger radios on Windows 2000 and Windows XP. A simple parallel port adapter and kernel mode driver allows direct programming of X2212 and X2444 EPROM's on your PC.

• Publisher: rtzaudio
• Last updated: July 17th, 2018

CNC Studio USB

CNC Studio USB is a program that connects a PC, notebook or netbook with the USB Port of a CNC machine with a parallel port. The application can be used to control any CNC machine which has a parallel port and which uses clocking / direction signals as actuation.

• Publisher: GoCNC
• Last updated: January 21st, 2014

cncGraF Pro

The cncGraF software is a program for controlling and operating CNC milling machines with three stepper motors. Command signals are sent via a parallel port (LPT) or a USB port to the power drivers and then to the built-in stepper motors of the CNC machine. The program also reads and indicates the condition of the three limit reference-switches.

• Publisher: Michael Boenigk
• Last updated: January 25th, 2012

LabTool-48XP/UXP Software

The LabTool-48UXP is a universal device programmer, which works through your PC's USB port or parallel port. It supports over 10,000 different devices (including memory, logic and single chip). It also features a 48-pin universal pin driver and an expandable TTL pin driver.

• Publisher: Advantech Equipment Corp.
• Last updated: December 11th, 2012

BASCOM-AVR

BASCOM AVR is a very powerful and easy-to-use compiler for the AVR series of micro controllers developed by Atmel. The program comes with a very user-friendly interface and a set of simple commands, and provides more flexibility than other programs in this category.

• Publisher: MCS Electronics
• Last updated: December 15th, 2016

Additional Laptop parallel port cnc driver selection

Parallel Port Control

A simple User Control developed in C#.Net used to control the Parallel Port. The following tasks can be performed using it: - Send data to Data Pins. - Receive data from Data Pins. - Send data to Control Pins. - Receive data from Control Pins. - Read current status of Status Pins. - Implement Synchronous and Asynchronous Loops. - Implement UP, DOWN and UP-DOWN Counters.

• Publisher: Jaspreet Kaleka
• Last updated: October 2nd, 2010

SoftCollection Parallel Port Viewer

SoftCollection Parallel Port Viewer lets you view and change the state of selected Parallel Port. You can select the required LPT port from its menu. Using the displayed pin-outs of parallel port, you can connect your electronic circuit without any error. Please remember to use a resistor of at lest 500 ohm to protect your computer.

• Publisher: SoftCollection
• Last updated: November 26th, 2015

Timer

This is a program that enables the PC to connect to the outside world, by using the printer and parallel port LPT1. Hardware can then be connected to the computer to control solenoids, relays, lights and sensors etc. Timer, consists of 11 forms. A main form, 8 output forms, 1 inputs form and a settings form. The main form gives the status of all 8 outputs and 5 inputs.

• Publisher: Hot Time Software
• Last updated: October 13th, 2011

PonyProg2000

Ponyprog is very powerful and popular microchip programmer. Ponyprog enables the user to program EEPROM, FLASH and PIC's using user friendly tools and multiple programmer types. Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.

• Publisher: Claudio Lanconelli
• Home page: ponyprog.sourceforge.net
• Last updated: August 2nd, 2017

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

• Publisher: KellyWare
• Last updated: April 12th, 2012

Printfil

Print from DOS, Unix, Linux to Windows printers: USB, GDI, PDF, e-mail, network, IP, fax. Capture LPT1:-LPT9: & COM1:-COM9: and redirect the jobs, even to a printer physically connected to the captured port and w/out physical LPT/COM ports installed

• Publisher: aSwIt Srl: Mail, Print for DOS, Windows
• Home page: www.printfil.com
• Last updated: December 18th, 2022

Notebook Manager

Notebook Manager is a management software that allows you to control various hardware and software settings on your personal laptop computer. The Notebook Manager contains 9 functions which allows you to view and/or config your laptop computer's BIOS settings and Microsoft Windows functions.

• Publisher: Acer
• Last updated: July 25th, 2008

Z-Downloader Utility

Z-Downloader Utility is a free program that can be used to send firmware and files to printers, over network, USB, RS-232 or Parallel port connections. The program automatically detects the printers connected to your computer and displays the information.

• Publisher: Zebra Technologies
• Last updated: April 29th, 2015

iBall Lappie Twist Cam

Break the Distance Barrier. Break the Time Barrier. Come Close! Feel the presence. Explore the marvels of iBall's webcam technology…..specially developed for Indian skin tone. More clearer, more closer. - 1.3M pixels resolution (Interpolated 12M pixels still image & 2M pixels video) - High quality 1/4 CMOS sensor - High quality 5G wide angle lense

• Publisher: iBall
• Home page: iball.co.in
• Last updated: February 16th, 2012

DriveGLEAM

DriveGLEAM is a harddrive activity indicator and also include built in extensions for monitoring CPU and memory load. It works by immitating the harddrive LED on screen. This is a very useful if your computer case is hidden (under the table) or on another physical location (remote desktop).

• Publisher: Svein Engelsgjerd
• Home page: www.dirtcellar.net
• Last updated: December 22nd, 2011