Ncr scanner configuration tool in Title/Summary

NCR RealPOS Scanner Configuration Tool

Although the programming sequences are well documented in the scanner's user guide, when troubleshooting comes and user guides are not handy enough, it is very much comfortable for the user to just diagnose and configure their scanners using a user-friendly point-and-click software interface.

• Publisher: NCR Corporation
• Last updated: April 20th, 2010

Scanner Configuration Manager

Scanner Configuration Manager is a program that offers you the possibility to configure your scanners. Scanner Configuration Manager saves scanner settings in CFG files, so you can access a variety of different scanner configurations that you have set up.

• Publisher: Unitech
• Last updated: September 20th, 2012

fi Network Scanner Admin Tool

The fi Network Scanner Admin Tool is an application that connects to each scanner and configures the scanner settings. You can specify the port to connect to the scanner or download the manual to check its settings. The Admin Tool supports connectivity through IP address, scanner name or FQDN of the target scanner.

• Publisher: Fujitsu
• Home page: www.fujitsu.com
• Last updated: July 27th, 2016

Ncr scanner configuration tool in Description

KEYENCE Configurator

SZ Configurator is an intuitive, step-by-step configuration tool for KEYENCE safety laser scanners. This application makes it easy to create protection zones to the left, right, or directly along the scanner's centerline. This lets you choose the most convenient location to mount the scanner.

• Publisher: KEYENCE Corporation
• Last updated: September 30th, 2017

BlindScanner Standard

Whether it is necessary to buy another scanner if you already have one in office or at home just for everyone to be able to scan documents without distracting colleagues from their important work? The BlindScanner software will share and open access to a scanner on the local area network.

• Publisher: BlindScanner Masters ITC Software.
• Home page: www.blindscanner.com
• Last updated: May 20th, 2013

XYZscan Handy

XYZscan Handy is a 3D-objects scanner assistant tool designed for 3D Scanner and 3D Scanner Pro. The program has three scan modes: Head mode, Object mode, and Full Body mode. These modes ensure that you get the best results when scanning to make 3D portraits or replicating objects. Maximum scan volume reaches 39.3 (D) x 39.3 (W) x 79.7 (H) inches, and even Full Body mode.

• Publisher: XYZprinting, Inc.
• Last updated: December 29th, 2016

ERL 61850 IED Configurator

ERL 61850 IED Configurator is an IEC 61850 configuration program intended for use with all ERL products. This tool helps the user to map data from remote GOOSE into ERLPhase IED data. It does the interoperable exchange of communication system configuration data between an IED configuration tool and a system configuration tool.

• Publisher: ERLPhase Power Technologies Ltd
• Home page: www.erlphase.com
• Last updated: October 24th, 2016

Security Configuration Manager

This paper describes Microsoft® Security Configuration Manager, a Microsoft Management Console (MMC) tool designed to reduce costs associated with security configuration and analysis of Windows NT-based systems. The Microsoft Management Console is a Windows-based multiple-document interface (MDI) application that makes extensive use of Internet technologies.

• Publisher: Microsoft
• Last updated: March 13th, 2008

Additional Ncr scanner configuration tool selection

Nokia Configuration Tool

This is a PC application that provides control for the settings for Nokia devices. With Nokia Configuration Tools you can connect your phone to a PC to access settings. The connection to PC is established via Nokia PC Suite and USB cable. The messages are sent via SMS using a compatible Nokia device connected to the PC.

• Publisher: Nokia
• Last updated: May 26th, 2020

Citrix XenApp Server Configuration Tool

Citrix XenApp Server Configuration Tool helps you configure XenApp 6 for Windows Server 2008 R2 server role installations. The XenApp image can be prepared for imaging and provisioning before, during, or after configuring XenApp. The extended functionality includes an option to prepare the server for imaging and provisioning.

• Publisher: Citrix Systems, Inc.
• Last updated: August 7th, 2012

Fatek Ethernet Module Configuration tool

Fatek Ethernet Module Configuration tool helps you configure Ethernet module. This software is a windows-based software and has following functions: Basic module Information setup - Includes IP (Network address), gateway, netmask, baud rate, operating mode, module name, module description.

• Publisher: Fatek Automation Corp.
• Last updated: October 25th, 2012

Festo Configuration Tool

The FCT enables movement of axial systems in individual steps or in sequences. You have access to tools to write individual records in the teach-in process into the motion record table as well as trace functions.

• Publisher: Festo
• Last updated: July 9th, 2011

IBM Standalone Solutions Configuration Tool

Standalone Solutions Configuration Tool (SSCT) is a program designed to support an interactive interface with graphics for determining the price, ideal environment, available rack cabinet space and available resources. The program also facilitates technical collaborations in configuring eServer systems and rack cabinets.

• Publisher: IBM
• Home page: www-947.ibm.com
• Last updated: June 9th, 2014

iPF605 Media Configuration Tool

The Media Configuration Tool is a software utility that registers new media types to the printer and related software according to your choice of paper. The media information of Premium Glossy Paper 2 280 and Premium Semi-Glossy Paper 2 280 has been added.

• Publisher: Canon Inc.
• Last updated: January 31st, 2013

Festo Configuration Tool Plugin CMMP-AS

The FCT consists of the following components: a framework as program start and entry point with uniform project and data management for all supported types of components. a PlugIn for the special requirements of a component type with the necessary descriptions and dialogs. The PlugIns are managed and started by the framework.

• Publisher: Festo AG & Co. KG
• Last updated: November 26th, 2013

OS32C Configuration Tool

This Program Have the following features : -70 sets of safety zone and warning zone combinations, for complex changes in zone guarding parameters -Configuration memory block, no need to reprogram after sensor replacement, minimal down time -8 Individual Sector Indicators and LED indicators, determine scanner status at a glance

• Publisher: Omron Scientific Technologies, Inc.
• Home page: www.sti.com
• Last updated: April 27th, 2012

Configuration Tool for Imaging Devices

The Configuration Tool for Imaging Devices (CTFID) from Bosch Security Systems increases efficiency for CCTV installers and service personnel. Using CTFID, technicians can check status, change settings, control pan/tilt/zoom (PTZ), and even update firmware from virtually anywhere along the video cable.

• Publisher: Bosch Security Systems
• Last updated: August 1st, 2014

iPF650 Media Configuration Tool

The media configuration tool is a software utility that registers new media types to the printer and related software according to the choice of paper. It is freeware for the printer and it is really easy to use. Available in the most important languages and for almost all the windows OS.

• Publisher: Canon
• Last updated: April 8th, 2013