Neuro programmer 3 serial in Title/Summary

Neuro-Programmer

Neuro-Programmer can change brain wave activity, which is directly connected to your state of mind, using brainwave entrainment. This program is compatible with AudioStrobe devices such as the Procyon, Proteus, and Light & Sound Synergizer. The BioOptimization feature allow you to use biofeedback devices to automatically enhance the effectiveness of the neural stimulation.

• Publisher: Transparent Corporation
• Last updated: October 19th, 2015

Serial Port PIC Programmer

The PIC programmer presented here uses PC's serial port for communication between the programming software and simple PIC programmer hardware. Serial Port PIC Programmer software is very easy to use and works on all Windows platforms. Here is the list of currently supported flash devices from Microchip PICmicro 12F and 16F product lines: 12F629, 12F675,etc.

• Publisher: Oshon Software
• Last updated: March 31st, 2008

Serial EEPROM Programmer

Very useful software for reading and writing 93Cxx, 24Cxx, and 24Wxx series EEPROMs. Needs only a very simple hardware, connects to parallel or serial port.It is just a simple software for testing and programming serial EEPROMs using the PC parallel or serial port. Supply voltage +5V is taken directly from the port. Warning - some parallel ports can't be used this way.

• Publisher: Zdenek Janovsky
• Home page: hw-server.com
• Last updated: May 29th, 2012

Neuro programmer 3 serial in Description

Topview Programmer A

The Topview Programmer A maintains separate buffer areas for selected device’s flash memory, Program Encryption Table, User parameter Table, Serial EEPROM in the programming environment. Initially you need to transfer your target program code/data from the files into this buffer and then program the selected device with these buffer contents.

• Publisher: Frontline Electronics Pvt Ltd. Salem. India.
• Home page: www.frontline-electronics.com
• Last updated: May 19th, 2008

SmartCache

SmartCache is a practical application that lets you securely store information on an ACOS1 or ACOS3 ISO 7816 smart card. SmartCache interfaces with the smart card using either an ISO 7816 Phoenix-style Reader/Writer or a Development Terminal connected to an RS-232 serial port or any PC/SC reader.

• Publisher: SmartCache
• Home page: www.smartcache.net
• Last updated: February 16th, 2010

Steinberg Instrument Set Neuro Mindset

Neuro Mindset is a collection of 30 electronic drum kits, and 572 electronic sounds including kicks, snares, hihats, percussion, synths and SFX. You also get complete production kits for drum and bass, neurohop, and dubstep. 353 groove patterns are given for instant beat programming.

• Publisher: Steinberg Media Technologies GmbH
• Home page: www.steinberg.net
• Last updated: October 24th, 2016

PicFlash-ISP

The PicFlash Programmer is an affordable, reliable, and fast production grade programmer for PIC 12, 16 & 18 series Flash, OTP Microcontrollers and 24Cxx I2C EEPROM’s. Software Features: Automatic device identification before programming. Supports all operations program, verify, blank check, read, secure, erase & so on.

• Publisher: Uc Micro Systems
• Last updated: October 31st, 2011

ActiveComport Serial Port Toolkit

ActiveComport is built on top of the Microsoft serial device drivers. It just uses these drivers. It neither replaces them, nor does it install any additional serial device drivers.ActiveComport is available as a 32-bit component and as a 64-bit component. Adding serial communications requires specialized knowledge that might be outside an individual programmer's expertise.

• Publisher: ActiveXperts Software
• Last updated: May 26th, 2020

Additional Neuro programmer 3 serial selection

PonyProg2000

Ponyprog is very powerful and popular microchip programmer. Ponyprog enables the user to program EEPROM, FLASH and PIC's using user friendly tools and multiple programmer types. Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.

• Publisher: Claudio Lanconelli
• Home page: ponyprog.sourceforge.net
• Last updated: August 2nd, 2017

PICkit2

With Microchip’s powerful MPLAB Integrated Development Environment (IDE) the PICkit™ 2 enables in-circuit debugging on most PIC® microcontrollers. In-Circuit-Debugging runs, halts and single steps the program while the PIC microcontroller is embedded in the application. When halted at a breakpoint, the file registers can be examined and modified.

• Publisher: Microchip
• Last updated: January 31st, 2012

PICPgm Development Programmer

PICPgm is an app designed to program PIC microcontrollers using an external programmer hardware connected to the PC. The program allows you to: check if a PIC microcontroller is empty, program a HEX file into a PIC microcontroller, erase a PIC microcontroller, read the content of a PIC microcontroller and save it to a HEX file.

• Publisher: Christian Stadler
• Last updated: December 3rd, 2017

Quartus II Programmer

Quartus II Programmer is a program that enables you to add your programming and configuration files, specify programming options and hardware, and then proceed with the programming or configuration of the device. It automatically detects devices with shared JTA Programmer and prompts you to specify the correct device in the JTAG chain.

• Publisher: Altera Corporation
• Last updated: September 1st, 2014

ISP Programmer

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories. Communication with devices is made serially in system without the need to pull the chip out of the socket or desolder it.

• Publisher: Adam Dybkowski
• Last updated: December 3rd, 2011

Advanced Serial Port Terminal

This program is a tool for every developer and programmer. With this program you will be able to change serial port settings without the need to close and re-open the serial port, adjust baudrate, databits, parity, stop bits, flow control parameters; save all received bytes into a file for later analysis and lots more.

• Publisher: Eltima Software
• Last updated: February 25th, 2011

93Cx6 Programmer

93Cx6 Programmer is a software designed for writing/reading Serial Microwire BUS EEPROM. The interface is actually a DB25 jack , an 8 pin socket and a capacitor. The application was tested on Intel P3 / P4 / Win98 / WinXP / 93c46, 93LC46, 93C86. 93Cx6 Programmer is a freeware.

• Publisher: underc0de
• Last updated: October 3rd, 2011

Epic 950 Master Programmer

The Epic 950 Master Programmer is a solution that allows up to 29 Ithaca Epic 950 printer firmware downloads at the same time. This application is based around the use of an Edgeport4 adapter connected to a standard USB port on your personal computer.

• Publisher: Transact Technologies Inc.
• Last updated: February 14th, 2012

KDI universal programmer

The KDI Universal Programmer 3.0 is a professional low cost parallel programmer, covering most of the classic and mega AVR 8-bit RISC microcontrollers, both I2C and Microwire serial EEPROMs and also MCS-51 family of Atmel corporation. The programmer connects to the PC through a standard parallel port and programs the supported chips via a very user friendly software.

• Publisher: KDI

Programmer's Notepad

Programmer's Notepad is an open-source text editor that I found to be very similar to the more popular Notepad++. In addition to basic text editing tools, it also offers many features that are especially useful for programmers, software testers, etc. It is a small application that runs on all the popular Windows versions.

• Publisher: Simon Steele
• Last updated: June 10th, 2019