Nvidia configuration program in Title/Summary

TS4000 Configuration Program

TS4000 Configuration Program is a free application that allows you to configure TS4000 Radio Modem device. This program comes with AirTest and AirScan that enables the TS4000 to be used as a frequency scanner. AirTest is a general purpose wireless modem test tool.

• Publisher: Teledesign Systems, Inc.
• Last updated: July 29th, 2015

Festo Configuration Tool Plugin CMXR-C2

Festo Configuration Tool Plugin CMXR-C2 is a configuration and commissioning program designed for the multi-axis controller CMXR-C2. The program enables you set up a CMRX-C2 environment, to add, edit and remove components, to check the controller in formation and status.

• Publisher: Festo
• Last updated: June 11th, 2014

ultraDMX Configuration

ultraDMX is a bi-directional DMX512 interface with USB connection to a computer. An onboard Atmel microcontroller ensures timing accuracy and prevents flickering effects. ultraDMX Configuration program lets you define the settings such as Output Rate, Break Time, Mark After Break, RDM Mode, DMX Throttle etc. It also lets you update the firmware of ultraDMX devices.

• Publisher: DMXking.com
• Home page: dmxking.com
• Last updated: December 23rd, 2015

Nvidia configuration program in Description

iDRN configuration

The iDRN configuration program allows the user to configure the iDRN family of products: iDRN-FP, iDRN-PR, iDRN-ST, iDRN-TC, iDRN-RTD, iDRN-ACC, iDRN-ACV Configuration is possible using either serial communication or Ethernet. When Ethernet is used, the configuration program is compatible with the EIS, EIS-2 and EIS-W.

• Publisher: NEWPORT Electronics, Inc
• Last updated: March 8th, 2011

ERL 61850 IED Configurator

ERL 61850 IED Configurator is an IEC 61850 configuration program intended for use with all ERL products. This tool helps the user to map data from remote GOOSE into ERLPhase IED data. It does the interoperable exchange of communication system configuration data between an IED configuration tool and a system configuration tool.

• Publisher: ERLPhase Power Technologies Ltd
• Home page: www.erlphase.com
• Last updated: October 24th, 2016

JavaScript Image Rotator

The script can be customized highly and easily through the SCP(Script Configuration Program). You can specify image, size, color, link and more to script. It is unnecessary to write any code manually. SCP will generate all necessary codes automatically.

• Publisher: USINGIT
• Last updated: April 17th, 2009

Flash Image Gallery Builder

Flash-producing design tool to create sliding image gallery on web pages in just several clicks! The script can be customized highly and easily through the SCP(Script Configuration Program). You can specify image, size, color, link and more to script. It is unnecessary to write any code manually. SCP will generate all necessary codes automatically.

• Publisher: USINGIT
• Last updated: March 8th, 2011

NextWindow Touch+

Touch+ provides a driver and configuration program for serial applications (a serial interface is available in the 2403 Touch Panel Overlay and certain specialised products). The touch screen communicates directly with the computer’s operating system via the USB interface, just like a USB mouse.

• Publisher: NextWindow
• Last updated: March 3rd, 2010

Additional Nvidia configuration program selection

Configo

Set up your Prestigo remote in a few simple steps with Configo. The software offers you full customization options for your remote. Download the program, install and launch configuration program for optimal performance. The remote controller must be connected through the USB port for device discovery.

• Publisher: KONINKLIJKE PHILIPS ELECTRONICS N.V.
• Last updated: March 12th, 2012

Boot-US

Boot-US is compatible with existing standards. Configuration program executes directly under any 32 bit and 64 bit Windows variant (Windows 95 to Windows 10) Boot manager allows booting of all operating systems Boot manager allows booting from all local hard disks and diskette

• Publisher: Dr. Ulrich Straub
• Home page: www.boot-us.de
• Last updated: November 18th, 2024

ThinkPad-Konfiguration

This package is an utility programs for Microsoft Windows NT users for ThinkPad 365, 380, 560, 760 :- ThinkPad Configuration program (setup program)- Fuel-Gauge programThinkPad Configuration Support for the XGA panel, also a system information panel is available.

• Publisher: Lenovo Group Limited
• Last updated: February 22nd, 2008

AZedit

AZedit is a configuration program for RTS Matrix Intercoms. With AZedit you can manage different ports of the hardware. This free-to-use tool is pre-configured to work on a single-frame ADAM intercom system (ADAM-136). This program is very easy-to-use.

• Publisher: Bosch Security Systems, Inc
• Last updated: August 4th, 2016

AnalogX DXMan

DXMan is a nice little program that allows you to view a list of all the audio plug-ins installed in your computer. Not only you can configure them directly from this utility, but also you can remove old and unused plug-ins that are still installed in your computer. A very useful application!

• Publisher: AnalogX
• Home page: www.analogx.com
• Last updated: May 27th, 2020

RTSelect

RTSelect is a robust, user-friendly product selection and configuration program. Use RTSelect to define equipment component and/or package requirements and save and store your project-specific information. This tool gives a complete description of the compressor and other components.

• Publisher: GEA Refrigeration Technologies
• Home page: www.geafes.com
• Last updated: June 11th, 2015

WinIPAC

WinIPAC is an I-PAC, Mini-PAC and J-PAC configuration program. It's primary function is to tell the boards which keyboard character(s) to send to the PC for each button or joystick on the control panel. You configure this information using this program and then download the settings to the I-PAC board, where they are held in EEPROM even after a power off.

• Publisher: Ultimarc
• Last updated: February 18th, 2012

DVBViewer Recording Service

The DVBViewer Recording Service is a native Windows service. It can start the machine from Hibernate/Standby for recordings without needing DVB Task Scheduler or other programs and works even if no user is logged on to Windows. It executes programmed recordings with a very low system load in the background without DVBViewer running.

• Publisher: CM&V Hackbart
• Last updated: March 24th, 2014

EZwarePlus

EZwarePlus is a powerful HMI configuration program designed for your Maple Systems Graphic HMI. You can create functional touch screen applications for industrial processes such as automation, process control and OEM applications. You can use animated screens, alarms, trends, scripting, recipes and reports, schedule tasks, and even Video on some models.

• Publisher: Maple Systems, Inc.
• Last updated: October 27th, 2014

EDS PowerCon

EDS PowerCon is a powerful configuration program designed for TriLine PowerModules. It creates both part lists and order lists for you in parallel in the background, all in a convenient, clear and accurate manner. EDS PowerCon configures an orderable ASSEMBLY from the given characteristics.

• Publisher: ABB Striebel & John Support
• Last updated: August 7th, 2015