Osp opensees post processor in Title/Summary
![OSP - OpenSees Post Processor](https://windows.podnova.com/screenshots/384/384568_1_1.png)
OSP - OpenSees Post Processor
It allows users to create both serial and parallel finite element computer applications for simulating the response of structural and geotechnical systems subjected to earthquakes and other hazards. OpenSees is primarily written in C++ and uses several Fortran and C numerical libraries for linear equation solving, and material and element routines.
- Publisher: ZEvent
- Home page: opensees.berkeley.edu
- Last updated: November 22nd, 2009
![NonlinPro](https://windows.podnova.com/screenshots/145/145841_1_1.png)
NonlinPro
NonlinPro is a post-processor for the well-known nonlinear finite element analysis program DRAIN-2DX. In the past, DRAIN-2DX has been used almost exclusively by academic researchers. However, the recent shift towards performance based seismic resistant design has created a demand within the design profession for programs that can perform nonlinear static pushover analysis.
- Publisher: Advanced Structural Concepts
- Last updated: May 22nd, 2012
![FEAview](https://windows.podnova.com/screenshots/3344/3344745_1_1.png)
FEAview
FEAview is a finite element post-processor and results viewer for linear static problems using MSC.Nastran. It supports the elements, properties, materials, and loads commonly used in structures problems. It transforms the model and solver results data into readily comprehensible 3D graphical and tabular displays.
- Publisher: fe-tools, Inc.
Osp opensees post processor in Description
![OpenSeesPL](https://windows.podnova.com/screenshots/2753/2753545_1_1.png)
OpenSeesPL
OpenSeesPL is a PC-based graphical pre- and post-processor (user-interface) for three dimensional (3D) ground and ground-structure response. The 3D Finite Element (FE) computations are conducted using OpenSees developed by the Pacific Earthquake Engineering Research Center (PEER).
- Publisher: OpenSeesPL
- Home page: soilquake.net
- Last updated: April 20th, 2015
![CRISP2D](https://windows.podnova.com/screenshots/262/262687_1_1.png)
CRISP2D
CRISP2D is a processor for graphical interfaces using the finite element analysis program and some useful tools including the printing data options. The data is interactive and there are plenty of research and visualizations tools for analyzing them.
- Publisher: The CRISP Consortium Ltd
- Home page: www.mycrisp.com
- Last updated: June 15th, 2010
![CalculiX](https://windows.podnova.com/screenshots/549/549476_1_1.png)
CalculiX
CalculiX is a package designed to solve field problems. The method used is the finite element method.With CalculiX Finite Element Models can be build, calculated and post-processed. The pre- and post-processor is an interactive 3D-tool using the openGL API. The solver is able to do linear and non-linear calculations. Static, dynamic and thermal solutions are available
- Publisher: Charly Piva
- Home page: www.calculix.de
- Last updated: October 5th, 2011
![GLview Inova](https://windows.podnova.com/screenshots/1569/1569733_1_1.png)
GLview Inova
GLview Inova is a modern, fully featured post-processor and 3D visualization tool with direct file interfaces to all the major CAE software systems on the market (E.g. Abaqus, Ansys, I-deas, Fluent, Femap, etc.). This combined with an extensive set of features for both structural mechanics and fluid dynamics post-processing.
- Publisher: Ceetron
- Home page: www.ceetron.com
- Last updated: December 1st, 2011
![GiD](https://windows.podnova.com/screenshots/2860/2860936_1_1.png)
GiD
GiD is a universal, adaptive and user-friendly pre and post processor for numerical simulations in science and engineering. It has been designed to cover all the common needs in the numerical simulations field from pre to post-processing: - Geometrical modeling (CAD) - Mesh generation - Definition of analysis data - Data transfer to analysis software - Postprocessing operations
- Publisher: cimne
- Home page: www.gidhome.com
- Last updated: September 28th, 2017
Additional Osp opensees post processor selection
![STAAD.Pro](https://windows.podnova.com/screenshots/2603/2603800_1_1.png)
STAAD.Pro
The choice of 0.2 million Structural Engineers worldwide, STAADpro is guaranteed to meet all your structural engineering needs.
- Publisher: Research Enigneers Intl.
- Home page: www.bentley.com
- Last updated: July 27th, 2022
![LISA](https://windows.podnova.com/screenshots/3679/3679500_1_1.png)
LISA
LISA is a finite element analysis package for Windows with an integrated modeler, multi-threaded solver and graphical post-processor. It allows you to analyze the dynamic response and vibration, heat flow and thermal stress or the DC current flow in solids.
- Publisher: Lisa-Finite Element Technologies (Sonnenhof Holdings)
- Home page: www.lisa-fet.com
- Last updated: June 23rd, 2013
![LM](https://windows.podnova.com/screenshots/2381/2381095_1_1.png)
LM
LM is a program to edit contest logs ex post; a so-called “contest post processor”. LM contains an integrated log editor to type in paper logs or to edit the log ex post. Supported by a special input-turbo (“Fast append mode”) the input effort will be reduced to a minimum. In addition, LM tries to take over as much work as possible.
- Publisher: DL8WAA
- Home page: contestsoftware.com
- Last updated: May 11th, 2014
![STAAD.Offshore](https://windows.podnova.com/screenshots/4028/4028852_1_1.png)
STAAD.Offshore
STAAD.Offshore is a powerful suite of pre- and post processor modules for the STAAD.Pro structural analysis and design program. Main features: - Nonlinear structural analysis. - Dynamic response analysis due to environmental loads. - Impact effects analysis. - Severe accidental loadings analysis.
- Publisher: Bentley Systems, Inc.
- Home page: communities.bentley.com
- Last updated: February 16th, 2017
![VisualMill](https://windows.podnova.com/screenshots/193/193117_1_1.png)
VisualMill
VisualMILL is a CAM package ideal for mold, die and tooling, wood working, rapid-prototyping, and general machining. It comes with a post-processor generator that allows you to create your own. The program also offers you powerful geometry creation and editing tools.
- Publisher: MecSoft Corporation
- Last updated: January 31st, 2014
![BREEZE 3D Analyst](https://windows.podnova.com/screenshots/2311/2311623_1_1.png)
BREEZE 3D Analyst
BREEZE 3D Analyst is a powerful post-processor that enables you to analyze and visualize data in multiple formats to help you better understand, interpret, and summarize your modeling results. It is also useful for analyzing meteorological, terrain, and concentration data.
- Publisher: BREEZE
- Last updated: March 26th, 2015
![midas FEA](https://windows.podnova.com/screenshots/3098/3098030_1_1.png)
midas FEA
midas FEA is founded on the expertise in geometry modeling, mesh generation, analysis and contemporary graphics technologies accumulated since 1989 . midas FEA, a total solution for civil-orientated analysis problems, provides a number of unique and practical tools .
- Publisher: MIDAS Information Technology Co., Ltd
- Last updated: February 26th, 2011
![Cnc Code Maker](https://windows.podnova.com/screenshots/2629/2629865_1_1.png)
Cnc Code Maker
A very simple 2D CAD/CAM software with toolpath generation and user-editable postprocessors. Suitable for most CNC machines on the market. There are post-processor specific cycles, contour cycles and simple point-to-point functions. Fanuc, Heidenhain is supplied with the software. Drawings can be saved in DXF or a native XML, human readable format. Import of DXF files (R12) are supported.
- Publisher: CNCSimple.com
- Last updated: March 4th, 2011
![StruCad Password Tool](https://windows.podnova.com/screenshots/4373/4373925_2_1.png)
StruCad Password Tool
StruCad Password Tool is a free program that allows you to generate StruCad new installation version passwords for StruCad 97 through to StruCad V15.5. It also allows you to display the CNC post processor installer passwords for installation of post processors for StruCad V8 through to StruCad V11 inclusive. You can reset the dongle last used date and time for permanent dongles for StruCad V16.
- Publisher: Tekla
- Last updated: March 24th, 2014
![Cyclic1D](https://windows.podnova.com/screenshots/2158/2158134_1_1.png)
Cyclic1D
Cyclic 1D is an Internet-based nonlinear Finite Element program for execution of one-dimensional site amplification and liquefaction simulations (for level as well as mildly inclined sites). Here, You can build and analyze your own soil profiles, and view and download the computational results.
- Publisher: Cyclic1D
- Last updated: April 27th, 2011
![Related topics](https://windows.podnova.com/images/related_top.png)
![Trending topics](https://windows.podnova.com/images/act_top.png)