Pc based digital oscilloscope 2100 in Title/Summary

SoftScope2

SoftScope2 is a portable PC-based Digital Oscilloscope.SDS 200A uses USB that supports plug’n play, with 12Mbps communication speed.SDS 200A has advanced trigger circuitry so that it can detect many complex signals.SDS 200A does not need an external power source, because it is bus-powered from USB.

• Publisher: softDSP
• Home page: www.softdsp.co.kr
• Last updated: June 20th, 2011

DSO-3062AL USB

DSO-3062AL USB is a computer based digital oscilloscope program. It provides features such as: - automatic cursor tracking measurements - waveform storage, record and replay dynamic waveforms - user selectable fast offset calibration - add, subtract , multiply and division mathematical functions - selectable 20 MHz bandwidth limit - external trigger - waveform average.

• Publisher: hantek
• Last updated: May 12th, 2015

Syscomp Digital Storage Oscilloscope

Vertical Controls Each of the independently-sampled input channels features a full hardware preamp with seven input ranges from 50mV/division to 5V/division. Timebase Controls Examine a variety of different signals with a 21 step timebase from 50ns/division to 200ms/division.

• Publisher: Syscomp Electronic Deisgn
• Last updated: May 11th, 2011

Pc based digital oscilloscope 2100 in Description

DSO-2150 USB

DSO-2150 USB is a portable PC-based digital oscilloscope application. DSO-2150 USB can save waveform in the following formats: text file, .jpg or .bmp graphic file, MS excel/word file. You must use a probe with more than 60MHz bandwidth to get undistorted signal.

• Publisher: hantek
• Home page: www.hantek.com.cn
• Last updated: September 29th, 2012

DSO-3064A

DSO3064 Kit IIIis a 4-channel PC-based digital oscilloscope. It features 10K-16M Memory Depth, Frenquency Counter, FFT, USB 2.0 interface plug and play; and optional LAN. This program lets you view the waveforms captured in realtime from DSO3064. You can easily change the time/division, voltage/division, trigger mode, probe settings, etc.

• Publisher: hantek
• Last updated: December 9th, 2015

s2x100

The s2x100 for Dynon Instruments is a viewer for the product s2x100 dual channel digital oscilloscop . The OscilloScope Viewer allows you to view waveforms , measure and split them as you like. You can trasnform the waveforms or you can calculate the difference or sum of two cursors of you choosing.

• Publisher: Dynon Instruments
• Last updated: December 24th, 2009

AxoGraph

AxoGraph provides an intuitive, efficient way to acquire and analyze time-series data, and a direct route to publication quality graphics. A wide variety of analysis features and graph styles are available. The analysis can be automated, extended or customized and the graphs can be exported to presentation and page layout programs.

• Publisher: AxoGraph Scientific
• Home page: axograph.com
• Last updated: June 6th, 2014

HANTEK1008

HANTEK1008 is a free program designed to work with the HANTEK1008 digital oscilloscope. The program enables you to add, subtract, multiply and divide mathematical functions, to store, record and replay dynamic waveforms and perform cursor tracking measurements.

• Publisher: hantek
• Last updated: March 24th, 2022

Additional Pc based digital oscilloscope 2100 selection

PhotoS

A web based photo database built on PHP and MySQL. Supports adding photos one at a time or loading an entire folder. Stores a thumbnail of each image in the database so that it can be viewed even if the photo is in offline storage.

• Publisher: Caricature Software
• Home page: www.alexking.org
• Last updated: April 17th, 2008

Extron Electronics - DSP Configurator

This program lets you configure Extron DSP-based digital audio processing tools. DSP Configurator tracks each product and allows complete control, so that audio system professionals only need to be familiar with one DSP program. Its user interface allows for quick and easy visualization of all input and output signal paths inside a single window.

• Publisher: Extron Electronics
• Home page: www.extron.com
• Last updated: May 31st, 2015

TNM DSO

PC Based Digital Storage Oscilloscopes. 15/20 MHz bandwidth. Optically isolated from PC. USB/Parallel port connection. Spectrum analyzer. Trigger event counter. Fast ISP cable. JTAG FPGA Programmer. Digital IC Tester. Up to 4 Card (64 Channels) in one PC.

• Publisher: TnmElectronics.com
• Last updated: May 31st, 2012

HPP-21

Looking for a low cost alternative to get the most out of Hitec’s programmable digital servos? The HPP-21 Digital Programmer and Servo Tester allows you to access all the programable features right from your PC. Features - PC Programmer for Hitec Digital Servos - PC Based Digital Servo Programmer and Tester

• Publisher: HITECRCD
• Last updated: April 4th, 2012

DNTV Live!

DNTV Live! is a Windows based Digital TV application designed to make your Satellite and Terrestrial TV watching experience an enjoyable one. DNTV Live was the first DVB application in the world (back in 2003) to work (viewing and recording) with multiple cards in the same PC at the same time.

• Publisher: DigitalNow
• Home page: www.digitalnow.com.au
• Last updated: April 13th, 2012

Marvin

Marvin caters to all skills levels via a simple point and click user interface. Users can create their stories and animated movies in minutes. The Marvin script engine makes it incredibly easy for any user to become a producer and to transform their personal stories and content into fully animated avatar based digital stories and movies.

• Publisher: NTICED Pty Ltd
• Home page: www.marvin.com.au
• Last updated: February 25th, 2010

Autodesk Toxik

The software’s architecture is built around its ultra-high resolution interaction and high dynamic range imaging (HDRI) core, which allows you to work interactively and intuitively with virtually any visual media, regardless of bit depth or image size.

• Publisher: Autodesk, Inc.
• Last updated: December 9th, 2009

RoMac 10 Band Equalizer

The RoMac 10 Band Graphic Equalizer coupled with your present computer's soundcard, affords you the finest Windows based digital equalizer made for the Amateur Radio community. The RoMac 10 Band Equalizer has ten separate equalizer bands, with a generous plus or minus 16 dB of range, to ensure that your audio always sounds it's best.

• Publisher: RoMac Software
• Home page: www.romacsoftware.com
• Last updated: March 31st, 2015

Samplitude Pro X Suite

Samplitude Pro X Suite includes: - All advantages of Samplitude Pro X - Analogue Modelling Suite Plus: authentic simulation of high-end analog outboard devices. - Vandal: virtual guitar and bass amplifier with physical modeling technology. - Independence Sampler Workstation including 70 GB library: over 3,000 instruments, arranger and step sequencer patches.

• Publisher: MAGIX Software GmbH
• Home page: pro.magix.com
• Last updated: June 12th, 2013

Kramer KDS-MP1 Manager

The KDS−MP1 is a LAN−based digital signage media player. The unit receives content streamed from the Internet, saved in its internal memory or from an external USB memory stick and displays it via HDMI, VGA, or AV 3.5mm outputs. The program lets you configure the device and video streams.

• Publisher: Kramer Electronics LTD.
• Last updated: April 30th, 2014