Ptz controller circuits in Title/Summary

PTZ Controller

PTZ Controller V3 makes it much more easier to control PTZ camera. PTZ Controller supports multiple protocols, includes Pelco D, Pelco P, AD ASCII, AD Manchester, Bosch, Sony, Panasonic, Samsung, LG and Canon protocols. It also to allows you to connect multiple cameras to different COM ports on one computer.

• Publisher: Serial Port Tool
• Home page: www.serialporttool.com
• Last updated: March 19th, 2021

IP Cam PTZ

IP Cam PTZ is a free Mozilla Firefox extension that enables you to load any IP Cam that supports URL commands in the Sidebar. It gives you full Pan and Tilt control along with the video stream, thus you will not need to go through the cameras own user interface- annoying login process.

• Publisher: DRZ400S
• Last updated: December 19th, 2014

AC Circuits Challenge

This interactive computer program consists of several circuit analysis activities. Realistic troubleshooting activities are also included involving resistors, capacitors, inductors and transformers. AC Circuits Challenge consists of a set of fourteen activities to assist instruction of AC circuit analysis and troubleshooting.

• Publisher: ETCAI Products
• Home page: www.etcai.com
• Last updated: April 5th, 2011

Ptz controller circuits in Description

AnadigmDesigner

AnadigmDesigner® take the design process to an even higher level of abstraction, fully automating the construction of common filter types and "proportional, integral, derivative" controller circuits. AnadigmDesigner® includes a time domain functional simulator which provides a convenient way to assess your circuit's behavior without the need for a lab set-up.

• Publisher: Anadigm
• Last updated: November 23rd, 2011

PicoSoft

PicoSoft was especially created to help hardware developers build circuits diagrams for Pico controllers. The program is also able to simulate these diagrams in order to find possible errors and calculate controller output. It includes a quite large library of Pico controllers and additional expansion circuits which you can afterward connect to your computer through a COM port.

• Publisher: Moeller GmbH, Rockwell Automation Inc.
• Last updated: May 11th, 2008

i-Catcher Console

iCatcher Console provides a complete scalable IP CCTV system, with motion detection, alerting, remote web interface, simultaneous record & playback, scheduled activity, device control, and flexible display options, exceeding the standards you'd expect from a modern digital IP CCTV system.

• Publisher: iCode Systems
• Home page: www.icode.co.uk
• Last updated: September 22nd, 2020

Basic Circuits Challenge

This application is a 32-bit Windows application for Vista, XP, Me, 98 and 2000 and many more!. Approximately 3.5 MB of hard drive space is required. This program is designed for systems with at least a 450 MHz Pentium processor with 256 MB or more of RAM.

• Publisher: ETCAI Products
• Home page: www.etcai.com
• Last updated: May 2nd, 2011

PSpice Student

PSpice Student is an analog circuit simulator that was specially designed for Electrical Engineering students in need of simulating circuits and of solving circuits-related calculations. If you find yourself in the posture of not understanding a bit of what your professor is teaching you in Circuit Theory class, then you should definitely try this software.

• Publisher: Cadence Design Systems, Inc
• Last updated: March 1st, 2008

Additional Ptz controller circuits selection

Intel USB eXtensible Host Controller Driver

This driver contains support for the following Intel® Chipsets and Intel® Processors

• Publisher: Intel Corporation
• Last updated: April 1st, 2015

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

• Publisher: Native Instruments GmbH
• Last updated: September 19th, 2023

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller is a free-to-use driver for Atheros network card. This easy-to-install driver is recomended only for Windows XP.

• Publisher: Atheros Communications Inc.
• Last updated: November 14th, 2012

Grbl Controller

Grbl Controller is designed to send GCode to CNC machines, such as 3D milling machines. It isn’t super smart, it just needs to give the user a nice way to get commands down to whatever controller they are using. Qt is pretty cool because you can create a nice GUI application for Windows, Mac and Linux.

• Publisher: Zapmaker
• Last updated: June 27th, 2014

TINA

TINA is an electronic circuit simulator and PCB design tool for analyzing, designing, and real-time testing of analog, digital, HDL, MCU, and mixed electronic circuits and their PCB layouts. You can also analyze SMPS, RF, communication, and optoelectronic circuits.

• Publisher: DesignSoft Inc.
• Home page: www.tina.com
• Last updated: March 31st, 2018

Cutting Plotter Controller

The Cutting Plotter Controller is a software program that lets you perform settings at your computer instead of having to make them at the plotter's control panel. In particular, frequently-used cutting condition settings and complicated registration mark reading procedures can be easily performed. Using the Controller together with the driver further improves overall operating efficiency.

• Publisher: Graphtec Corporation
• Home page: www.graphteccorp.com
• Last updated: July 10th, 2010

SOTI Pocket Controller-Pro

Using Pocket Controller Pro V6, you can connect to any Windows Mobile device and control it from your desktop computer. Once you're controlling your mobile device from your desktop or laptop, projection equipment can be used to present your mobile device to a large group of people.

• Publisher: SOTI Inc.
• Last updated: June 17th, 2008

CNC USB Controller

CNC motion controller is a link between personal computer and drivers for stepper or servo motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).

• Publisher: planet-cnc.com
• Home page: www.planet-cnc.com
• Last updated: April 23rd, 2012

MailList Controller

MailList Controller is a specialized mail client for sending bulk emails to multiple recipients. Each subscriber gets an unique email which can be personalized using the contact database. Automated subscriptions can also be accepted using a web form.

• Publisher: Arclab Software Technologies
• Last updated: May 26th, 2020

Craft ROBO Controller

Craft ROBO Controller helps you to manage and control your OPS654 Craft ROBO Controller device. When you activate Craft ROBO Controller for the first time, the operation guide is displayed under the parameters for the Craft ROBO. The [Hide/Display the Operation Guide] button turns the operation guide function on/off.

• Publisher: Graphtec Corporation
• Last updated: February 2nd, 2009