Punching shear for shear wall in Title/Summary

Shear Wall Analysis

Analyze a building which is laterally supported by shear walls for the shears and moments in each of the shear walls. Loads due to wind and seismic conditions can be input in two perpendicular directions. Lateral loads are distributed based on the combined flexural and shear stiffness of the individual wall elements.

• Publisher: Digital Canal Corporation
• Last updated: May 18th, 2010

SHEAR 97

Shear 97 is a very useful tool, easy to manipulate. Shear 97 lets you create your own bend types with the "Shapemaster". Shear 97 modules include ShearCAD Detailing, Barlisting, Tagging, Interactive Detailing, Optimum Shearing, Estimating/Pricing, Job Scheduling, Invoicing/Bill of Lading, remote detailer "Sendfile" system. Shear 97 can work with all makes of shearlines and benders.

• Publisher: Application Software Inc.
• Home page: www.erebar.com
• Last updated: September 9th, 2011

Wall Gage Creator

Wall Gage Creator is a stand-alone program that makes the wall gage creation module of WinFlume available as a separate program, for use with any hydraulic structure having a rating table or rating equation. Wall Gage Creator can load rating table data from a text file or generate rating table points from a power-curve equation.

• Publisher: U.S. Dept. of the Interior, Bureau of Reclamation
• Last updated: February 15th, 2010

Punching shear for shear wall in Description

Shearail Design Program to EC2

Scans the building's infrastructure and provides alternatives. Shearail prefabricated punching shear reinforcement system, which is BS 8110 and EC2 compliant, enables site work to be carried out far more effectively and efficiently than traditional loose links, making it ideal for complex project management.

• Publisher: Max Frank Ltd
• Home page: www.maxfrank.co.uk
• Last updated: November 7th, 2017

Flat Slab Analysis and Design

Flat Slab Analysis and Design designs beamless concrete slab floors (flat slab or waffle slab) in accordance with ACI 318. The analysis and design follow the equivalent frame analysis method of the ACI code, which considers a one-bay wide strip of the floor system as a continuous frame.

• Publisher: Digital Canal Corporation
• Last updated: February 12th, 2010

LENTON® STEEL FORTRESS App

The LENTON STEEL FORTRESS design software calculator is used to determine the amount of punching shear reinforcement needed around a column head. The calculator will determine the amount of shear reinforcement you need and the configuration in which to place it. Designs generated by the program are in accordance with ACI318. Post-tensioning and slab openings are taken into consideration.

• Publisher: ERICO
• Home page: www.erico.com
• Last updated: October 15th, 2009

SLABS

SLABS is a program that can be used by structural engineers to perform a static analysis and design of reinforced concrete slab systems of any shape, including suspended slabs and slabs-on-ground. You can perform reinforcement designs, long term deflections, beam designs, reactions, automatic two way action, effective moment of inertia, and punching shear.

• Publisher: INDUCTA
• Last updated: May 12th, 2015

Combined3D

Combined3D is a general purpose spread and combined (two load points on a single footing) foundation design software for use on many different types of foundation design projects.Whether you are designing foundations for your industrial, residential or other commercial projects, Combined3D will help you complete them in minutes.

• Publisher: Dimensional Solutions
• Last updated: December 27th, 2009

Additional Punching shear for shear wall selection

spMats

spMats is a program that allows you to optimize complicated foundations design, reinforcing and soil-structure interaction. It allows you to analyze and design concrete foundation mats, combined footings and slabs on grade. The program also performs punching shear calculations around columns and piles.

• Publisher: STRUCTUREPOIN, LLC
• Home page: www.structurepoint.org
• Last updated: April 19th, 2013

WWPA Design Suite

The Design Suite offers calculations for the major sizes and grades of Western lumber products available in the market today. Lumber Design Suite has been updated to match the 2005 National Design Specification® for Wood Construction (NDS®). The new version also includes a stud wall deflection check, as required by the International Building Code.

• Publisher: Western Wood Products Association
• Last updated: August 16th, 2010

RISA-2D

RISA-2D is easy to learn, and powerful to use. With an intuitive interface and familiar spreadsheets, you can solve your next problem in minutes, not hours. You can quickly analyze everything from simple beams and trusses to shear walls with openings, and break problems down to their basics and go.

• Publisher: RISA Technologies
• Last updated: August 2nd, 2021

spBeam

spBeam is a program used for analysis, design, and investigation of beams and one-way slabs in reinforced concrete floor systems. The program features torsion effects in the shear design and investigation allowing engineers to achieve more economical cross sections where coupled shear and torsion occur (in accordance with US and Canadian codes).

• Publisher: STRUCTUREPOINT, LLC
• Last updated: March 10th, 2012

ASDIP Concrete

Quickly model your concrete members with the simple and efficient graphical user interface. Confidently optimize your design and comply with design Code provisions. Impress clients and plan-checkers with eye-catching condensed or detailed reports. Extensive documentation, solved examples, and blog posts to guide you throughout the software.

• Publisher: ASDIP Structural Software
• Last updated: May 20th, 2022

RISAMasonry

RISAMasonry offers a complete answer for analysis and design of masonry construction. RISAMasonry designs masonry walls, columns and beams (lintels) to the latest codes and includes a library of masonry units. The program addresses the working stress design of beams, columns and both in-plane and out-of-plane walls. The program designs slender walls using the iterative strength design method.

• Publisher: RISA Technologies
• Last updated: November 29th, 2009

HILTI PROFIS DF Diaphragm

Hilti PROFIS DF Diaphragm Software allows you to design steel deck roof and floor systems faster with features that increase design efficiency including calculation of diaphragm shear, uplift resistance, interaction, flexibility factors and deflection. Additionally, PROFIS DF Diaphragm incorporates a powerful design optimization feature.

• Publisher: Hilti corp.
• Last updated: February 20th, 2016

Rheocalc

By using the powerful Rheocalc software you can automate your sample testing for maximized accuracy, reliability and work efficiency. Rheocalc can analyze data, generate plots to compare tests, run math models and much more. Plot data available: % Torque, RPM, Viscosity, Shear Rate, Shear Stress, Temperature, Time.

• Publisher: Brookfield Engineering Labs
• Last updated: February 15th, 2012

BOLTCALC

BOLTCALC is a specialized program for determining whether or not a bolted joint will successfully sustain the forces acting it. If the joint is being designed it can estimate the size of bolt required for the application. Once the bolt size has been estimated, or details of an existing joint have been entered, detailed calculations can be performed.

• Publisher: Bolt Science
• Last updated: February 15th, 2016

SurfSeis

SurfSeis is an app that allows you to process seismic data using the multichannel analysis of surface waves (MASW) method. The Active MASW uses active seismic sources (e.g., sledgehammers, weight drop, charges, etc.) and a linear receiver array, and data collected in a roll-along manner.

• Publisher: Kansas Geological Survey
• Last updated: August 24th, 2016