Relay logic test program freeware in Title/Summary
POS-TEST
POStest is an open source project designed to give developers a GUI based utility for exercising POS devices using JavaPOS. It does not replace actual physical hardware and JavaPOS Drivers. POStest can also serve as a great reference on how to program using JavaPOS.
- Publisher: Zhu Hai Jspeed Electronic Technology Co..Ltd.
- Home page: postest.sourceforge.net
- Last updated: November 22nd, 2016
APTS Protection Relay Test Set
This combination enables the APTS to deliver precision waveforms at the highest output power available in a portable lightweight computerised test set anywhere. The highest burden single & three-phase electromechanical relays as well as the latest microprocessor based relays can be tested directly and without the need for additional accessories or amplifiers.
- Publisher: Relay Engineering Services
TroubleX
TroubleX is designed to both train and test industrial electricians in relay logic and electrical schematic comprehension. Utilizing simulation and interactive electrical schematics, it becomes an exceptional training and testing tool.
- Publisher: Business Industrial Network
- Home page: bin95.com
- Last updated: January 22nd, 2018
Relay logic test program freeware in Description
OutPortII
If you have some experience writing batch files then you can easily write a program to control the relay board. A sample test program is provided. The second is a fully-featured Windows-based utility. It was written especially for this application.OutPort II for QK74 has count function added as well as a random output function.
- Publisher: QKits
- Last updated: November 16th, 2011
RISBEE
Risbee is a graphical programming software. You have to drag and drop icons on a grid. Each icon represents a simple action which, added with an other, create complex behavior for your robot. You read the grid from left to right. When your program is finished you cand upload it on your robot with a single click. The icons are divided into big families. LOGIC MATHEMATICS MOVES SENSORS
- Publisher: POB Technology
- Last updated: August 31st, 2022
Easy-wireStation
Cirris easy-wire software guides you through the steps of registering connectors/adapters, setting up a test program, testing a cable or harness, and archiving the test report. It lets you choose from several test modes including single test, continuous test, sequential build test, random build test, and single pass build test.
- Publisher: Cirris
- Home page: www.cirris.com
- Last updated: February 8th, 2017
Configurator REV-302
Configurator REV-302 is a free program that contains a large number of various parameters accessible via extended settings menu, integrated in the device. In addition, REV-302 allows for setting up to 8 independent control programs and up to 5000 time-activated events for controlling the relay contacts. The program speeds up the device setup process.
- Publisher: Novatek-Electro
- Last updated: June 17th, 2015
Galaxy Examinator
Galaxy Examinator is a program that enables test and product engineers to perform device characterization, test program qualification, reliability analysis, and yield analysis studies from standard semiconductor data files such as STDF, GDF, e-Test (WAT and PCM), CSV, and more than 60 other datalog formats. You can analyze the test gradient on your wafer to investigate process problems.
- Publisher: Galaxy
- Last updated: March 2nd, 2015
Additional Relay logic test program freeware selection
Zelio Soft 2
Zelio Soft 2 is a configuration tool for Zelio Logic smart relays, designed for the management of simple automation systems. It enables you to program the relays in ladder language or function block diagram (FBD) language. You can also perform simulation, monitoring, and and supervision of your systems.
- Publisher: Schneider Electric
- Last updated: March 30th, 2023
CLICK Programming Software
Programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes. We still use the "ladder logic" which resembles the relay logic of earlier systems. CLICK Programming Software is used to program the CLICK PLCs. This is a freeware. The company produces many low cost PLCs and are a good way to start learning PLCs.
- Publisher: AutomationDirect
- Last updated: December 13th, 2011
cnlabSpeedTest
With the cnlab speed test program (which is available without charge), users can measure their upload and download speed, and the respons time for requests to reference systems in the Internet. The test is run in the standards browser or in specific apps for Android, iOS, Symbian and Windows-Phone-8 devices.
- Publisher: cnlab AG
- Last updated: June 27th, 2018
Modicon Simulator
Modicon Simulator™ allows users to program, run, and test Modicon™ ladder logic and simulated I/O without using a PLC.Testing and debugging Modicon programs without such a tool would typically take days.With the simulator, these tests can be accomplished in minutes—without the need for expensive hardware.
- Publisher: FasTrak SoftWorks, Inc.
- Home page: www.fast-soft.com
- Last updated: January 21st, 2010
EZ Schematics Pro
EZ Schematics Pro is a 2D cad program for developing hydraulic schematics and diagrams, pneumatic diagrams as well as electrical schematics and diagrams. You can insert relay logic into your drawings, insert symbols such as contacts, relays, timers, motors, limit switches, pressure switches, thermal switches, flow switches, push buttons, selector switches and overloads.
- Publisher: Wade Instruments and Service
- Home page: www.wadeinstruments.com
- Last updated: September 11th, 2018
Free Typing Test
The Free Typing Test is a software program that facilitates users to check the typing skills and speed. The typing test app helps users to evaluate the level of typing skills. This free software app has a simple and easy-to-use interface. The software allows the users to measure the accuracy and counts words per minute.
- Publisher: Media Freeware
- Last updated: July 17th, 2018
CIF Device Driver
The CIF Device Driver supports ISA, PCI and PCMCIA cards. The CIF Device Driver Test Program is : · - to test, if the CIF Device Driver has access to the card. (The steps of the access test are described in section Test the Access of the CIF Device Driver to the CIF ) - to read information from the driver or from the card. (See section DriverInfo ) and so much more.
- Publisher: Hilscher GmbH
- Last updated: January 16th, 2012
ArduinoSimulator
The Arduino Simulator is designed to test a program quickly with the Arduino UNO without really having connections to external I/O (buttons, potentiometers, display, power, etc.). On the Arduino Simulator you can choose buttons, LED's, sliders and many other components for your projects. Almost all the I/O is present on the simulator so you can test all of your programs on the monitor screen.
- Publisher: Xevro
- Last updated: October 31st, 2016
- Publisher: DOGANsoft Corp.
- Home page: www.dogansoft.com
- Last updated: March 12th, 2008
HM Test
This program helps the user to test the installation of the HM-USB-ISO and HM-BT-BAT-ER on a personal computer. After HM-USB-ISO and HM-BT-BAT-ER are connected to a computer, HM Test program will detect them and will show the status of the connection. If the operation is successful, the program will show the HART Tag and ID data.
- Publisher: ProComSol, Ltd
- Home page: www.procomsol.com
- Last updated: November 28th, 2013
