Rohde schwarz test tone generator in Title/Summary

Test Tone Generator

This Test Tone Generator (TTG) turns your PC into a scientific, professional function generator. It can waveforms at any frequency that your sound card can produce. Output is possible up to 24bit and 384kHz sampling rate and only limited by the capability of your sound hardware.

• Publisher: Timo Esser
• Last updated: November 30th, 2008

Rohde & Schwarz FreRes

Use this program to measure the frequency and/or level response of a device under test, using a generator as signal source and a power meter, a receiver or a spectrum analyzer as indicator. Virtually any Rohde & Schwarz signal generator, spectrum analyzer, or power meter is supported. Main features: - Source selection and GPIB setup. - Indicator selection and GPIB setup

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Last updated: May 28th, 2012

Rohde & Schwarz RSADSIF

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow.

• Publisher: Rohde & Schwarz GmbH & Co. KG

Rohde schwarz test tone generator in Description

Tone Generator

NCH Sound Tone Generator lets you create audio tones, sweeps or noise waveforms using a Windows computer with a sound card or a PocketPC handheld.

• Publisher: NCH Swift Sound Software
• Home page: www.nch.com.au
• Last updated: May 27th, 2020

EMC32

EMC32 Measurement Software runs on 32-bit operating systems from Microsoft and offers a common user interface for electromagnetic interference (EMI) and electromagnetic susceptibility (EMS) measurements. The software is a modern and powerful tool for controlling and monitoring Rohde & Schwarz EMI test receivers.

• Publisher: Rohde & Schwarz
• Last updated: March 17th, 2011

Analytek CRTU-G Test Case Explorer

The Test Case Explorer has been designed to ease the process of running 3GPP compliance tests on the Rohde & Schwarz CRTU-G and CRTU-W. It takes the form of a Windows application which can become the front-end with which the user interacts with the instrument for both manual and automated testing.

• Publisher: Analytek Limited
• Last updated: October 31st, 2011

Rohde & Schwarz RSCommander

RSCommander is a tool for a wide range of Rohde & Schwarz spectrum analyzers, signal generators and network analyzers for making hardcopies, reading traces and uploading user correction data for linearization. It works only with the hardware device, and cannot accept data from files.

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Last updated: May 29th, 2014

Rohde Schwarz RSIB-VISA

Rohde Schwarz RSIB-VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. It also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

• Publisher: Rohde & Schwarz
• Home page: www.rohde-schwarz.com
• Last updated: December 1st, 2017

Additional Rohde schwarz test tone generator selection

NCH Tone Generator

NCH Tone Generator can be used to generate tones so it may come in handy for such uses as aligning radio audio level and calibrating sound equipment. Although the program is very easy to use, it requires background knowledge about acoustics, music and audio technology.

• Publisher: NCH Software
• Home page: www.nch.com.au
• Last updated: September 30th, 2014

Test Case Generator

It is a generator for test cases based on equivalence class analysis and combination of states. This tool is basically a wrapper for the PICT-Tool by Microsoft (a tool for Pairwise Independent Combinatorial Testing). It also provides support for pairwise combinations.

• Publisher: Mark Bulmahn
• Last updated: July 6th, 2012

Rohde Schwarz Fieldstrength and Power Estimator

This program helps you calculate electric and magnetic field strength and power flux density. The program can make calculation and converts Watts to mW and dBm, V/m to mV/m and dBmV/m as well as A/m to mA/m and dBmA/m. Additional features are calculation of propagation loss or antenna factors.

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Last updated: June 18th, 2014

Rohde & Schwarz dBCalculator

This application note is an extension to the application note “dB or not dB?” and comes with a free of charge software tool. The R&S dB Calculator can be used to perform calculations related to decibel. The tool includes a calculator for adding and subtracting an arbitrary number of power levels expressed in units of dBm and watt

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Home page: www.rohde-schwarz.com
• Last updated: August 31st, 2022

DTM Test XML Generator

DTM Test XML Generator can generate sample XML files in bulk for software or service testing. The structure of the document to be generated can be defined manually or imported from existing XML file or XSD schema. Repeat function can be defined with fixed or random number for nodes and attributes.

• Publisher: DTM soft
• Home page: www.sqledit.com
• Last updated: May 27th, 2020

Rohde & Schwarz FSHRemote

FSHRemote is a program for reading data, and controlling a R&S®FSH3/6/18 Handheld Spectrum Analyzer from a remote computer. The physical connection can be via either a fixed phone network, a mobile phone network or over LAN / Internet. Use FSHRemote from a PC to control all the functions of the FSH or to read any measurement data.

• Publisher: Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz GDE

GDE (Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool.The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files.

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Last updated: August 31st, 2022

Rohde & Schwarz K6 Pulse Sequencer

The R&S Pulse Sequencer software generates complex pulses and bursts for use with any of the baseband generators of the AFQ family. Features : - Generates DFS pulses according to FCC standard - Radar signals for receiver tests - RFID signals according to standard

• Publisher: Rohde & Schwarz GmbH & Co. KG
• Last updated: May 29th, 2012

KORG M1 Le

The M1 software synthesizer reconstructs the M1 into an eight-part multi-timbral tone generator featuring up to 256 notes of polyphony. Topping the list of software improvements are variable filter resonance, two Insert effects per part, and two Master effects.

• Publisher: KORG
• Last updated: June 18th, 2008

WinSQL

WinSQL is a universal database management tool that can be used with any relational database to perform administrative tasks such as importing/exporting data, generating test data, reverse engineering an existing database, comparing schema and data between databases or simply running SQL queries

• Publisher: Synametrics Technologies, Inc.
• Home page: web.synametrics.com
• Last updated: July 18th, 2023