Rs232 data loggers in Title/Summary

RS232 Data Logger

RS232 Data Logger is an application used to register all the traffic incoming through a serial port (i.e. bar-code devices, mouses, serial printers, etc). It allows you to monitor multiple serial ports at the same time, the data is stored in an easy-to-read text file, for its later analysis.

• Publisher: Eltima Software
• Last updated: March 6th, 2008

Scale and balance data parser

The "Scale Data Parser" module for AGG Software data loggers allows you to parse incoming data from various scales, balances, and indicators. If necessary, the module can also send a special command to the device to request data. This application supports about 57 different data loggers.

• Publisher: AGG Software
• Home page: www.aggsoft.com
• Last updated: December 1st, 2017

Advanced Serial Data Logger

This program inputs RS232 data directly into file, Excel, Access, or any Windows application. The program has the capability to log multiple serial (RS232,RS485,RS422) ports in the same time. It handles the RTS signal and control the direction of data flow.

• Publisher: AGG Software
• Home page: www.aggsoft.com
• Last updated: February 2nd, 2023

Rs232 data loggers in Description

TCP Splitter

TCP Splitter is a software tool that can split a TCP or UDP data stream into two or three identical data streams

• Publisher: AGG Software
• Home page: www.aggsoft.com
• Last updated: June 16th, 2023

Tinytag Explorer

Tinytag Explorer is an intuitive Windows program for all Tinytag data loggers. A step-by-step launch page provides a simple guide to set up a logger and a printable confirmation screen verifies your settings. Data from multiple logging runs or multiple loggers can be easily combined into the same graph or table, allowing easier analysis of that data using the comprehensive overlay features.

• Publisher: Gemini Data Loggers
• Home page: www.geminidataloggers.com
• Last updated: July 2nd, 2017

Omnilog Data Management

The OmniLog Data Management software is an application for reading, displaying, analyzing, organizing and exporting data that has been downloaded from data loggers. Data retrieved from data loggers or weather stations and previously saved data files can be viewed and printed in a values spread sheet list, as a graph or as a statistics report.

• Publisher: Intech Instruments
• Last updated: April 16th, 2012

Pocket Logger

Pocket Logger Software is an easy-to-use Windows program for all PACE portable dataloggers. With the software, a Pace Data Logger can be quickly setup for sensor type, start and run modes, sample rate, channel labels and more. A single click transfers the setup to the logger.

• Publisher: Pace Scientific Inc
• Last updated: November 7th, 2011

Flow Inspector

Flow Inspector is a free program that enables you to configure data loggers and logging meters. The program also displays data loggers and logging meters information, it allows you to download data contained by the these devices and you can delete files from the data transporter.

• Publisher: Seametrics Inc.
• Home page: www.seametrics.com
• Last updated: April 23rd, 2014

Additional Rs232 data loggers selection

EasyLog USB

EasyLog USB is a software tool used to set up and obtain data from various types of data loggers, mainly those needed to automatically record temperature, humidity, carbon monoxide, voltage and current values over a period of time. The whole process is wizard-driven, which makes it quite easy for the user, despite its evident technical complexities.

• Publisher: Lascar Electronics Ltd.
• Home page: www.lascarelectronics.com
• Last updated: June 30th, 2014

Testo ComSoft Basic Software

Basic software for programming and readout of Testo data loggers; graphic and tabular measurement value presentation as well as export function. Besides reading, Comsoft Basic allows you to configure a wide number of data loggers through the interface.

• Publisher: Testo Limited
• Last updated: March 30th, 2012

HOBOware

HOBOware is a powerful graphing and analysis program that allows you to plot, analyze and extract key data with a few simple clicks. With HOBOware, you can easily create high-quality visual presentations of your data and export of data files to text or Excel format.

• Publisher: Onset Computer Corporation
• Home page: www.onsetcomp.com
• Last updated: July 25th, 2018

Symphonie Data Retriever

Symphonie Data Retriever reads binary data files that have been stored on the computer hard disk from an email or MMC reader source. It reads files generated by SymphoniePLUS, Symphonie, 9300, 9200-PLUS, and Wind Explorer data loggers, scales them according to a user-defined site file, and converts them to tab-delimited ASCII files readable by Notepad, Excel, etc.

• Publisher: NRG Systems
• Last updated: December 28th, 2014

Opton

Opton is a Windows application designed to be used with Stylitis-10 and Stylitis-Power dataloggers. Opton replaces Set-10, adding new features such as better management of datalogger sites and easy sensor factor calculation. Opton has been designed to streamline operations and allow users to work with data as simply as possible.

• Publisher: Symmetron
• Last updated: December 25th, 2014

EEC Analyzer

The EEC Analyzer (also refered to as EA) is a tool that can analyze data produced by most of todays common data loggers. The EA can also log data and retrieve Diagnostic Trouble Codes (DTC) with the ELM320 Scan Tool or ELM327 Scan Tool. This scan tool is an OBDII interface that allows the EEC Analyzer to log and monitor live data.

• Publisher: EEC Analyzer
• Last updated: April 5th, 2010

Circuit Tools

Circuit Tools is a track focused, data-analysis package designed for Racelogic GPS data-loggers, including VBOX, Video VBOX, VBOX Sport, DriftBox and PerformanceBox. The application is designed to automate many tasks and quickly present a driver with the crucial information required to improve lap-times.

• Publisher: Racelogic
• Last updated: October 14th, 2015

Internet sharing plugin

The "Internet Sharing" is additional plugin for data loggers (for example, Advanced Serial Data Logger) is intended for transferring log files with data received via the SMTP (e-mail), FTP (File Transfer Protocol), SFTP (Secure File Transfer Protocol) and HTTP (HTTPS) protocols.

• Publisher: AGG Software
• Last updated: April 26th, 2012

Winfluid

Winfluid enables the programming and activation of measuring equipment as well as the downloading of data. It also deals with all levels to flow conversions. Last but not least, WinFluid automatically controls data retrieval and storage (GSM data loggers).

• Publisher: Hydreka
• Last updated: October 6th, 2015

SebaDataView

SebaDataView is a multifunctional program designed for working with devices of the Sebalog series. By using the application the loggers can be programmed prior to the measurement, and when the measurements are taken the recorded data can be then queried from the loggers, displayed, and analyzed.

• Publisher: SebaKMT
• Last updated: May 31st, 2015