License: All

Sort by: Relevance

Rs232 interface tester in Title/Summary

USBDMX.com Interface Tester

This little application allows you to send all the possible commands the interface and check out the responses. Great to use if you have just build the interface and want to make sure it all works. Windows interface tester. Like the Mac developer wrote (Downloadable from the Software section).

Publisher: James Uppington
Last updated: November 23rd, 2011

Interface Cable Tester

This is a small utility I wrote to test the interface cables used to program Yaesu and Icom radios (it will not work with cables for other radios). If the cable won't pass this test, then it definitely won't work with any of the Commander software. This test is also a feature of VX-2 Commander, and I will eventually be integrating this into my other radio programming software as well.

Publisher: Jim Mitchell
Home page: www.qsl.net
Last updated: July 15th, 2010

Serial Port Tester

Monitor, display, log and analyze all of your system's serial port activity using Serial Port Monitor. This professional serial port tester allows you to test any RS232/422/485 COM port on your system and log transmission data for further analysis.

Publisher: Virtual Serial Port Software
Home page: www.virtual-serial-port.org
Last updated: January 19th, 2018

Rs232 interface tester in Description

TRWinProg

TRWinProg is a Windows PC program for programming of TR devices. This means that all TR product lines such as rotary encoders, linear encoders, laser measuring devices, transformation measuring systems, displays etc. can be programmed with one software.

Publisher: TR-Electronic
Last updated: May 23rd, 2012

Win994a Simulator

Win994a is a TI-99/4A simulator written by Cory Burr that installs and runs in the Windows environment. It was written to simulate the TI-99/4A, not to emulate it perfectly. General Functionality: 1. Boots and runs all console ROM and GROM based functions including console BASIC. 2. CRU bits for the keyboard are implemented;

Publisher: BurrSoft
Home page: www.99er.net
Last updated: April 15th, 2010

researchdesignlab.com GSM GPRS Utility

GSM GPRS Utility is a program designed for the GSM Sim 900A Modem. The Modem is coming with an RS232 interface, which allows you to connect your PC as well as a microcontroller with the RS232 Chip (MAX232). The program provides bulk SMS sending, AT command testing terminal, step-by-step GPRS setup, and sample codes.

Publisher: researchdesignlab.com
Home page: researchdesignlab.com
Last updated: December 23rd, 2015

Vehicle Diagnostic ScanTool Pro

The graphic user interface (GUI), along with the help screens, hotkeys, and mouse support combine to provide a user friendly system. The main graphic user interface (GUI) consists of a pulldown menu and a tool bar. The execution of the menu items is accomplished through numeric controls, command button controls, pop-up panels and others.

Publisher: TechnoResearch, Inc.
Home page: www.technoresearch.com
Last updated: April 28th, 2012

Appload

Appload is a PC utility used to transfer Operating Systems or Application files from the PC into the Opticon terminal. The application is a wrapper around the LoadDll. Appload can only be used with scanners that either have a RS232 interface or USB interface. Scanners with a USB interface have to be set in USB VCP mode, before they can be used with appload.

Publisher: Opticon Sensors Europe B.V.
Last updated: March 18th, 2016

Additional Rs232 interface tester selection

232Analyzer

232Analyzer allows you to analyze the communication and other activities that are happening through serial ports. This powerful serial port protocol analyzer also allows controlling and monitoring serial ports, not only analyzing their parameters. These serial ports can be of various types, such as the ubiquitous RS232.

Publisher: CommFront Communications
Home page: www.commfront.com
Last updated: July 28th, 2010

USB Monitor

Software USB port sniffer, monitor tool with protocol analyzer and data logger. This Universal Serial Bus monitoring utility can spy, capture, view, log, analyze, test usb device activity performing connection traffic analysis with data acquisition

Publisher: HHD Software
Home page: www.hhdsoftware.com
Last updated: May 26th, 2020

CNCnet DNC

Integrates your CNC machine controls with serial (RS232) interface directly into your network and controls an unlimited number CNCs simultaneously on a single computer. - Cabling can either be made by using a direct cable, a serial - network interface or a wireless module. No need for Computers or special terminals at the shopfloor area.

Publisher: Inventcom
Last updated: June 29th, 2011

Elta Control Center

The Elta® Control Center (ECC) is a data transfer programm for: Elta® C (Software Release > V1.03) Trimble 3600 Zeiss EltaÒ (Release > V 1.04) Trimble 5600 (with Elta® CU) Elta® S (Software Release > V 1.31) RecLink S (Software Release > V 1.31) The PC links by RS232 Interface or USB Interface (with USB Serial Converter Cable) to the Instrument.

Publisher: Trimble ZSP Geodetic Systems
Last updated: December 21st, 2009

SIMEAS T

The SIMEAS T universal transducer allows measurement of all electrical quantities occurring in any network in a single unit. Especially in power plants and substations transducers are used for isolation of electrical signals and for further processing of measured values.

Publisher: Siemens Power Transmission & Distribution
Last updated: November 7th, 2009

CAN Analyzer

The CAN Analyzer is an instrument which develops and verifies system based in CAN-CANopen. This product allows for the study and configuration of CANopen systems, using a user interface that permits a simple access to devices and their objects. The instrument is composed of the following: module hardware with a RS232 interface that connects to a personal computer; and software for MS Windows.

Publisher: ADFweb.com
Home page: www.adfweb.com
Last updated: November 26th, 2015

JULABO EasyTemp Professional

The JULABO software solutions enable YOU to control, visualize and record temperature and time-dependent processes without any hassle. For relatively simple control tasks of only one JULABO instrument, the FREE 'EasyTemp' is ideal. For more complex tasks JULABO offers 'EasyTempProfessional' for controlling up to 8 instruments. The connection is carried out inexpensively and simply via digital.

Publisher: Julabo Labortechnik GmbH
Last updated: December 1st, 2011

SmartScan Translator

The SmartScan demo program is an actual working version of the SmartScan Translator program. Please note a SERIAL scanning device (also known as RS232 Interface) is required for use with SmartScan. If you have a keyboard wedge interface scanning device, that scanner will not work with SmartScan.

Publisher: Baus Systems, L.L.C.
Home page: www.baus-systems.com

DriveTopFc

DriveTopFc is a free program that enables you to set the Rexroth IndraDrive Fc device parameters. You can also document and save either offline or via the RS232 interface the parameters and if you are using the RS485 connection you can create a simultaneous communication with up to 31 IndraDrive Fcs.

Publisher: Bosch Rexroth AG
Last updated: May 21st, 2014

h/p/cosmos para control

To make the software as userfriendlyness as possible it has been designed in exactly the same style as the physical UserTerminal of the h/p/cosmos running machine. The great advantage (beside the nice looking) is that everyone who is familiar with the running machine, is also able to control the machine with h/p/cosmos para control 4.1.

Publisher: h/p/cosmos
Home page: www.h-p-cosmos.com
Last updated: August 12th, 2012