Silicon laboratories ide in Title/Summary

Silicon Laboratories IDE

The Silicon Laboratories Integrated Development Environment (IDE) is a complete, stand-alone software program that includes a project manager, source editor, source-level debugger and other utilities. The IDE and other development tools run under the Windows 2000, Windows XP and Windows Server 2003 operating systems and support the entire MCU portfolio.

• Publisher: Silicon Laboratories, Inc.
• Last updated: May 26th, 2020

Silicon Laboratories CP210x VCP Drivers for Windows 2000XP3

This review pertains to the latest version of the CP210x family of USB to UART Bridge Virtual COM Port (VCP) drivers from Silicon Labs Inc. CP210x drivers are required for proper operation/ facilitation of host communications for CP2101, CP2102, CP2103, CP2104,CP2105&CP2108 bridge devices.

• Publisher: Silicon Laboratories, Inc.
• Last updated: January 14th, 2014

Silicon Laboratories USBXpress Development Kit

The USBXpress development kit provides a complete host and device software solution for interfacing CP210x USB to UART bridge and C8051F32x/34x/38x and C8051T62x.T32x USB microcontroller devices to the Universal Serial Bus (USB). Silicon Labs makes USB easy: no USB protocol or host device driver expertise required.

• Publisher: Silicon Laboratories, Inc.
• Last updated: June 27th, 2011

Silicon laboratories ide in Description

Silicon Laboratories ToolStick Development Tools

The Silicon Laboratories ToolStick Terminal is a stand-alone utility that exchanges data and configuration information with the ToolStick. The ToolStick communicates with the PC across USB and with the target device across UART. It performs the following functions: - Transmission and reception of UART data. - UART configuration. - General-Purpose Input / Output (GPIO) control.

• Publisher: Silicon Laboratories, Inc.
• Last updated: September 30th, 2011

Silicon Laboratories Configuration Wizard 2

The Configuration Wizard 2 utility helps accelerate development by automatically generating initialization source code to configure and enable the on-chip resources needed by most design projects. The Configuration Wizard 2 creates complete startup code for a specific Silicon Laboratories MCU.

• Publisher: Silicon Laboratories, Inc.
• Home page: www.silabs.com
• Last updated: August 11th, 2013

Silicon Laboratories QuickSense Studio

Silicon Laboratories QuickSense Studio facilitates rapid product development and analysis for developers of user interface products. The easy to use graphical environment is comprised of multiple applications that guide developers through an intuitive development flow, including graphical configuration wizards, firmware templates and performance monitoring tools.

• Publisher: Silicon Laboratories, Inc.
• Last updated: September 21st, 2011

Silicon Laboratories FLASH Programming Utilities

The Flash Programming Utilities allow you to download your code to a device and perform other memory operations without needing to use the Silicon Labs IDE. The Integrated Development Environment (IDE) and other development tools run under the Windows 2000, Windows XP, and Windows Server 2003 operating systems and support the entire microcontroller (MCU) portfolio.

• Publisher: Silicon Laboratories, Inc.
• Last updated: September 22nd, 2020

mikroBasic PRO for 8051

mikroBasic PRO for 8051 is a comprehensive BASIC compiler for 8051 micro-controllers developed and marketed by Atmel and Silicon Labs. 8051 based embedded applications are developed, built and debugged using this compiler as a platform. This development environment has a wide range of features such as easy-to-learn BASIC syntax, easy-to-use IDE, very compact and efficient code, etc.

• Publisher: MikroElektronika
• Home page: www.mikroe.com
• Last updated: March 13th, 2012

Additional Silicon laboratories ide selection

Silicon Laboratories CP210x VCP Drivers for Windows 2000

The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the USBXpress direct access driver.

• Publisher: Silicon Laboratories, Inc.
• Home page: www.silabs.com
• Last updated: March 15th, 2011

Silicon Laboratories .HEX to .SVF Conversion Utility

Silicon Laboratories .HEX to .SVF Conversion Utility is a performance analysis tool. Its a very easy to use program.It was made to make our work about analysis easier and its one of the greatest program out there that you must have on your computer at home.

• Publisher: Silicon Laboratories, Inc.
• Home page: www.silabs.com
• Last updated: September 20th, 2011

Silicon Laboratories CAN OBD Reader Reference Design Kit

On-Board Diagnostics (OBD) is an automotive protocol supported by current vehicles to capture and report diagnostic data over a Controller Area Network (CAN) bus. The Silicon Labs CAN OBD Reader Reference Design use the CAN peripheral of the C8051F502 microcontroller (MCU) and interfaces to the OBD-II port in a vehicle to retrieve the diagnostic error codes and status information.

• Publisher: Silicon Laboratories, Inc.
• Last updated: April 13th, 2010

Silicon Laboratories RF to USB Reference Design Kit

As a development tool, the kit included two user-programmable wireless sensor nodes, a programming adapter and example code. This enables rapid prototyping of a user application on a realistic hardware platform. Design files and example code make adding wireless functionality to products simple.

• Publisher: Silicon Laboratories, Inc.
• Last updated: April 28th, 2012

Silicon Laboratories Battery Life Estimator

is an easy-to-use, web-based utility that gives designers a quick and easy way to understand the discharge characteristics of different system configurations. Easily compare single, parallel and series battery configurations. Generates a user-editable spreadsheet. GUI-based tool. Provides details on typical battery discharge characteristics.

• Publisher: Silicon Laboratories, Inc.
• Last updated: March 31st, 2010

USBXpress Software Development Kit

USBXpress development kit provides a complete host and device solution for interfacing CP210x USB to UART bridge, C8051F32x/34x/38x and C8051T62x/T32x USB microcontroller devices to the Universal Serial Bus (USB). It contains a library support for Keil, Raisonance and SDCC build tools.

• Publisher: Silicon Laboratories Inc.
• Last updated: July 13th, 2016

WDS Terminal Emulator

Silicon Labs’ Wireless Development Suite (WDS) provides wireless application developers a comprehensive toolset to quickly and easily create and deploy efficient, robust, and low-cost wireless applications with little or no specific RF design and measurement experience.

• Publisher: Silicon Laboratories Inc.
• Last updated: April 25th, 2011

TASKING Tools for 8051

New in v7.2 - CrossView OCDS debugger support for Infineon® XC8xx derivatives using DAS, including new XC864 and XC878 - Debugger/Flash support for Silicon Laboratories JTAG and C2 target boards -Support for new derivatives from various manufacturers, such as Infineon, Silicon Laboratories and NXP - Many small improvements

• Publisher: Altium BV
• Home page: www.tasking.com

Precision Clock EVB Software

The Precision Clock EVB Software is a set of utilities to control the EVB for all the Precision Clock devices. If the device is an Si5319/24/25/26/27/67/68/69 (MCU-controlled device), remove all pin control jumpers for the MCU to control the connected device successfully.

• Publisher: Silicon Laboratories
• Home page: www.silabs.com
• Last updated: November 28th, 2011

ClockBuilder Desktop

This GUI based software generates an NVM file, which is used by the factory to manufacture custom parts. Each custom part is marked with a unique part number identifying the specific configuration (e.g., Si5338CA00100-GM). Changes to the default configuration can always be made through the I2C interface.

• Publisher: Silicon Laboratories
• Last updated: November 10th, 2011