Software 8051 programming ladder in Title/Summary

CLICK Programming Software

Programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes. We still use the "ladder logic" which resembles the relay logic of earlier systems. CLICK Programming Software is used to program the CLICK PLCs. This is a freeware. The company produces many low cost PLCs and are a good way to start learning PLCs.

• Publisher: AutomationDirect
• Last updated: December 13th, 2011

HT700E Programming Software

HT700E is a programming software designed for TC-700 portable radio. Ideal for high-level professionals who want powerful yet streamlined communication tools, the TC-700 series are packed with cutting-edge technology and HYT innovations. HYT's voice compander audio enhancement and a powerful 1W speaker ensure superb clear, crisp sound, even in noisy environments.

• Publisher: HYT Corp.
• Last updated: December 27th, 2011

HT580E Programming Software

The HT580E Programming Software is used to configure the TC-580 device. The software is also able to flash newer firmware on the device as well as tweaking the operated frequencies.

• Publisher: Hytera Communications
• Last updated: February 26th, 2016

Software 8051 programming ladder in Description

uC/51

uC/51 is a series of 3 books, giving a clear overview about 8051 programming (with uC/51) and peripherals. The authors are members of Fachhochschule Bochum. The tool is a must for all, who are working with small autonomous robots. Written by members of the University of Karlsruhe the book is full of practical solutions, including full source codes for the uC/51 ANSI C Compiler.

• Publisher: Wickenhaeuser
• Home page: www.wickenhaeuser.de
• Last updated: May 30th, 2012

SafeLine Pro

SafeLine Pro is a Windows-based programming interface, facilitating the programming of the emergency lift telephones, floor displays and voice announcers. This software enables programming the products at the office with a desktop computer or on-site with a laptop.

• Publisher: Safeline
• Last updated: November 29th, 2015

ISP Programmer

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories. Communication with devices is made serially in system without the need to pull the chip out of the socket or desolder it.

• Publisher: Adam Dybkowski
• Last updated: December 3rd, 2011

M-PC

This Windows-compatible version of the Maxxyz™ and M-Series console is an online and offline editing tool that gives you total Maxxyz functionality from the ease and convenience of a PC or laptop. It is ideal for training purposes and preprogramming of shows.

• Publisher: Martin Professional A/S
• Last updated: February 25th, 2012

Hub Manager Pro

Hub Manager Professional Software makes programming and operation of Secured Series Access Systems fast and mistake free. It is a powerful and easy-to-use software solution for most applications and takes “Access Control Simplified” to a new level. With its fast and comprehensive management reports.

• Publisher: iEi
• Last updated: March 24th, 2022

Additional Software 8051 programming ladder selection

Testo ComSoft Basic Software

Basic software for programming and readout of Testo data loggers; graphic and tabular measurement value presentation as well as export function. Besides reading, Comsoft Basic allows you to configure a wide number of data loggers through the interface.

• Publisher: Testo Limited
• Last updated: March 30th, 2012

RSLogix 5000 Compare Tool

The RSLogix 5000 compare application give users the power to compare project files and generate a report that makes differences between projects. Users can see the report on-screen, save the report as a file, or print the report. The compare software supports Relay Ladder Logic, Function Block Diagramming, Sequential Function Charts, and Structured Text programming languages.

• Publisher: Rockwell Software
• Last updated: May 3rd, 2012

WorkSpace

WorkSpace for Windows is a powerful teaching program for the digital classroom. When used together with DualBoard, eInstruction Touch Board, MobiView, and Mobi, WorkSpace v9.1 provide teachers with useful tools, so they can work with materials in multiple formats from any source.

• Publisher: Flow Software Technologies
• Home page: www.einstruction.com
• Last updated: March 17th, 2016

CTSoft

CTSoft allows you to optimize the drive tuning, back-up the configuration, configure the on-board automation and motion controller and setup the drive-to-drive communications links.rnCommissioning software packages:rnrn - CTSoft - Drive parameter configuration and index motion editor

• Publisher: Control Techniques Ltd.
• Home page: www.controltechniques.com
• Last updated: November 24th, 2018

HT446SE Programming Software

HT446SE Programming Software is designed for TC-446S series Professional Two-way Radio. You can tune the parameters of the radio with your PC and a programming cable.

• Publisher: Hytera
• Last updated: August 22nd, 2013

Patch Maker

Patch Maker can help you create update patches for existing applications. Thus, the ultimate goal of using this program is to create a setup wizard that will only update the old files instead of installing the whole software. Patch Maker can really be used by anyone thanks to the help of a wizard.

• Publisher: Clickteam
• Last updated: July 10th, 2012

Diver-Office

Diver-Office is a Groundwater data management software for programming and reading Diver dataloggers. Easily convert your Diver data into water levels. Visualize your data on time series plots. Program Divers and download Diver measurements onto your PC. Export the data to a spreadsheet or modeling program.

• Publisher: Schlumberger Water Services
• Last updated: October 3rd, 2015

Accessory Programming Software

Accessory Programming Software (APS) is a utility that allows you to upgrade and/or configure your Motorola Solutions accessory product. You can upgrade the accessory firmware to a different version, retrieve the log from the accessory, identify which accessory is connected to the PC by noticing the blinking LED on the accessory, read the version information from the accessory, and more.

• Publisher: Motorola Solutions
• Home page: www.motorolasolutions.com
• Last updated: July 18th, 2017

WindLGC

WindLGC is an application designed for programming the IDEC SmartRelay. It allows you to create, simulate, test and save your projects. You can choose either function block or ladder programming, save your WindLGC program as a PDF or JPG file. You can also test and monitor your IDEC SmartRelay online.

• Publisher: IDEC
• Last updated: April 1st, 2017

SmartMotor Interface

SmartMotor Interface (SMI) Software for programming all SmartMotorsAnimatics’ SMI software provides an easy-to-use Microsoft Windows-compatible interface to your Animatics SmartMotor. Using SMI, you can define multi-axis motion control for 1 to 100 SmartMotors. SMI includes a terminal program, program editor, and source level debugger.

• Publisher: Animatics Corporation
• Last updated: March 24th, 2010