Solid works active x in Title/Summary

Solid Edge

Solid Edge is a mechanical design system with exceptional tools for creating and managing 3D digital prototypes. Solid Edge modeling and assembly tools enable your engineering team to easily develop a full range of products, from single parts to assemblies containing thousands of components.

• Publisher: Siemens Product Lifecycle Management Software Inc.
• Last updated: February 27th, 2013

eDrawings for Solid Edge

eDrawings for Solid Edge is the first email enabled collaboration tool designed to ease the sharing and interpretation of 2D & 3D product design data. It is a plug-in for Solid Edge that allows users to publish Solid Edge files as read only and ultra compact (upto 95% compression) eDrawings files for visualization, collaboration and design review.

• Publisher: eDrawings Publishers
• Home page: edrawings.geometricglobal.com
• Last updated: October 28th, 2015

Solid State Challenge

Solid-State Challenge consists of twelve activities to assist in teaching basic solid-state circuit concepts and troubleshooting. Exercise Titles: Basic Diode Testing, Basic Transistor Testing, Common Emitter Amplifiers One (Base Bias), Common Emitter Amplifiers Two( Voltage Divider Bias), Common Emitter Amplifiers Three ( with Emitter Bypass).

• Publisher: ETCAI Products
• Home page: www.etcai.com
• Last updated: July 1st, 2011

Solid works active x in Description

AV Bros. Page Curl Pro

This multi-purpose Adobe Photoshop and compatible hosts plug-in has the ALL NEW and unrivalled engine that lets you not only bend the image, using two type of bending (curling and folding), but also texturize it (using the bump maps), orient it in 3D space (including the perspective distortions) and obtain total control over the process of lighting the image (including the option of dropping inner shadows. List of Features: The ability to create both the turning page effect (Page Curl) and the folding page effect (Page Fold) (collectively – bends). The Multi-bend option: the ability to create several bends within the single session of the plug-in. The ability to orient the page in 3D space. The ability to specify the desired level of the perspective while orienting in 3D space. The ability to work with arbitrarily-shaped images (non-rectangular, with full or partial transparent areas, etc.) The total control over the process of creating the surface for a curled or a folded page by adjusting the following parameters of the surface: - Angle, Level, Radius, Obliquity, Torsion, Direction and the Limit of the turn (for page curling). - Angle, Level, Folding Angle and Direction (for page folding). Switching the direction (Upward or Downward) of page curling or folding. Adjusting the opacity of the whole page. Adjusting the cross-opacity of the page. The ability to specify various contents for either side of the page: - Content from the active layer. - Solid color (custom color, host's foreground or background colors). - Image from the file, which may be either tiled or resized to fit. - Content from any layer of the current document (This feature is available only for Adobe Photoshop 7.0 and higher.) The ability to flip the content of either side of the page. Swapping the content of the page's sides. The ability to choose between two lighting modes: the Simple and Advanced modes. Adjusting the level of the shading in the Simple Lighting mode. The total control over the process of lighting the page in the Advanced Lighting mode. This process includes: - Adding up to 25 light sources (Direct light sources.) for lighting both sides of the page. - Specifying the direction of either light source. - Specifying the parameters of the Diffuse Reflection of either light source, including the Color and Intensity of the Diffuse Reflection and the fact of its presence for either side of the page. - Specifying the parameters of the Specular Reflection of either light source, including the Color, Intensity and the Specular Exponent of the Specular Reflection and the fact of its presence for either side of the page. - Specifying the parameters of the Ambient Light, including its Color and Intensity for either side of the page. - Rendering Inner Shadows with adjustable Opacity and Size. (Inner Shadows are dropped by any existed Light Source upon your choice.) The ability to texturize either side of the page by using the grayscale images (called Bump Maps). As a Bump Map you can use either your document's channels or any file. The ability to adjust the existed Bump Map inside the plug-in. The following adjustments are available: Blur, Level, Flip Vertical and Horizontal. And you can also Invert (black to white and vice-versa) the existing Bump Map. The ability to make the bent part of the page to be outside the page's initial boundary. The ability to make the bent part of the page to be cut into the remaining part of the page. The ability to create the "non-complete" page curling effect by adjusting the turn Limit. The presence of a transparent area under the curled or folded part of the page. Multi-level Undo option. Supporting images in RGB, CMYK and Grayscale color modes. Specifying the quality of the surface rendering, including the Auto Mode. Exporting the result of the render as a PSD file. (Including current Color Profile provided by the host.) Fast and high-quality preview. Using various backdrops for the Main Preview area: - The standard checkerboard. - The custom solid color. - The content of the active layer of the current document. - The content of any layer of the current document. (This feature is available only for Adobe Photoshop 7.0 and higher.) Saving and loading settings of the plug-in. The ability to record scripting parameters and be automated by them (Scripting-aware).

• Publisher: AV Bros
• Home page: www.avbros.com
• Last updated: March 12th, 2008

AV Bros. Page Curl

AV Bros. Page Curl 2.0 is the filter plug-in (8bf) for Adobe Photoshop and compatible hosts. The plug-in is targeted to help you create two (2) types of effects using the all new and vastly improved engine: the very realistic turning page effect (Page Curl) and the folding page effect (Page Fold). The plug-in lets you adjust the plethora of parameters while curling or folding the page. The new unique features of AV Bros. Page Curl 2.0 along with the old ones, which were inherited from version 1.2, let you create amazing effects in almost no time! The User Interface of AV Bros. Page Curl 2.0 is extremely convenient and has some special features that make your work with the plug-in not only pleasant, but very efficient as well. List of Features: The ability to create not only the turning page effect (Page Curl), but the folding page effect (Page Fold) as well. The ability to work with arbitrary-shaped images (non-rectangular, with full or partial transparent areas, etc.) The total control over the process of creating the surface for curled or folded page by adjusting the following parameters of the surface: - Angle, Level, Radius, Obliquity, Torsion and Direction (for page curling). - Angle, Level, Folding Angle and Direction (for page folding). The ability to make the curled part of the page to be outside the page's initial boundary. Switching the direction (Upward or Downward) of page curling or folding. Changing the opacity of the whole page. Changing the cross-opacity of the page. The ability to specify various contents for either side of the page: - Content from the active layer. - Solid color (custom color, host's foreground or background colors). - Image from the file, which may be either tiled or resized to fit. - Content from any layer of the current document (This feature is available only for Adobe Photoshop 7.0 and higher.) The ability to flip the content of either side of the page. Swapping the content of the page's sides. Adjusting the level of the shading. The presence of a transparent area under the curled or folded part of the page. Supporting images in RGB, CMYK and Grayscale color modes. Specifying the quality of the surface rendering, including the Auto Mode. Exporting the result of the render as a PSD file. (Including current Color Profile provided by the host.) Fast and high-quality preview. Using various backdrops for the Main Preview area: - The standard checkerboard. - The custom solid color. - The content of the active layer of the current document. - The content of any layer of the current document. (This feature is available only for Adobe Photoshop 7.0 and higher.) Saving and loading settings of the plug-in. The ability to record scripting parameters and be automated by them (Scripting-aware).

• Publisher: AV Bros
• Last updated: March 9th, 2008

Radmin Remote Control

Radmin is fast remote control software for secure access to remote computer via Internet or LAN in multiple modes: view remote desktop, control remote PC's keyboard and mouse, file transfer, telnet, remote turn on/off, text and voice chat.

• Publisher: Famatech Corp.
• Last updated: May 27th, 2020

Clutter Cloak

Clutter Cloak is activated by a hotkey. It then obscures everything on the screen except the child window immediately under the mouse pointer. Most usefully, this would be the content pane of an editor, web browser or other document viewer, but Clutter Cloak doesn’t care and will happily cover up everything on the screen except a toolbar if that’s what the pointer is over when it is activated.

• Publisher: Tom Cooke
• Last updated: February 12th, 2009

RebootBlocker

Though considered to be a major step forward, Windows 10 still offers reasons to annoy Microsoft users. For one, its update policy. Not only it downloads and installs automatically whatever new updates are released, but also reboots your PC right afterwards regardless of its activity status. RebootBlocker is a tiny free Windows Service capable of reversing that unfair situation.

• Publisher: Ulrich Decker Software Entwicklung
• Home page: www.udse.de
• Last updated: March 26th, 2023

Additional Solid works active x selection

SolidWorks

SolidWorks is a program that provides enhanced engineering and design performances that help you get your work done faster and easier. You can manage product structures up front, access information everywhere and document designs for manufacture and assembly. You can also create detailed inspection reports for QA, calculate product costs as you design and print directly to 3D printers.

• Publisher: Dassault Systemes
• Last updated: July 26th, 2022

SolidWorks Explorer

The users can easily and quickly manage relationships when copying or renaming SolidWorks files, perform a where used search, and search for SolidWorks files on criteria such as configurations and properties. SolidWorks Explorer is the only CAD file manager that’s as intuitive as Windows® Explorer, provides flexible, searchable file management for SolidWorks files.

• Publisher: SolidWorks Corporation
• Last updated: March 7th, 2013

SolidWorks Viewer

SolidWorks Viewer is a program that lets you view, print and review SolidWorks parts, assemblies and drawings. You can send designs for client review by email or place designs on the web for your client to open and review. It enables you to provide your customers with a preview of designs in process.

• Publisher: SolidWorks
• Last updated: April 21st, 2015

SolidWorks Enterprise PDM

SolidWorks Enterprise Product Data Management (EPDM) is a full-featured data management solution for any size organization. A data vault powered by Microsoft SQL guarantees all information is securely stored and indexed for fast retrieval by authorized users within your company.

• Publisher: SolidWorks Corporation
• Last updated: November 5th, 2012

Logopress3 for SolidWorks

Logopress3™ BLANK functions allow the user to quickly and easily predict the theoretical blank of 3D formed parts. The Finite Element Analysis advanced functions helps both at the quotation stage and in the die design process. It minimizes development time in the press. Beyond the Tool & Die Industry's needs.

• Publisher: Logopress
• Home page: www.logopress3.com
• Last updated: October 19th, 2012

KeyShot SolidWorks Plugin

Use the KeyShot SolidWorks plug-in to import your model, create visuals faster and send any model changes back over to KeyShot. LiveLinking allows you to continue working and refining your SolidWorks model, then send all changes over to KeyShot with the click of a button.

• Publisher: Luxion
• Last updated: October 5th, 2015

Mastercam X7 for SolidWorks

Mastercam X7 for SolidWorks is a program that delivers toolpaths directly within SolidWorks. It offers a fully automated feature used to perform machining for pocketing, contouring and drilling, 2D and 3D High Speed Machining for complex parts and full multiaxis toolpathing capabilities.

• Publisher: CNC Software, Inc.
• Last updated: October 15th, 2013

SolidWorks Explorer 2014

SolidWorks Explorer is a free CAD file manager that provides flexible, searchable file management for SolidWorks files. You can easily search for CAD files from your computer, filter searches by adding tags, save the search results and open the files that you need.

• Publisher: Dassault Systèmes SolidWorks Corp.
• Last updated: December 6th, 2013

VisualCAM for SolidWorks

VisualCAM for SolidWorks is a plugin that will help you to create parts. VisualCAM for SolidWorks will save you countless hours by automatically updating toolpaths when your model changes. And being integrated with SolidWorks, the plugin guarantees the convenient single interface to learn.

• Publisher: MecSoft Corporation
• Last updated: February 16th, 2016

IMOLD for SolidWorks

IMOLD aims to simplify mold design process and help mold designers to be more productive. IMOLD V11 is not only SolidWorks 2012 ready but both 32 and 64 bit ready. For highlights on the new features and enhancements, please refer to: IMOLD V11 Highlights.

• Publisher: Manusoft Technologies Pte Ltd
• Last updated: February 27th, 2012