Podnova Player  Windows library  Podnova home
Multimedia | Business | Messengers | Desktop | Development | Education | Games | Graphics | Home | Networking | Security | Servers | Utilities | Web Dev | Other
License: All
Sort by: Relevance

Spi software parallel port in Title/Summary

Parallel Port PIC Programmer

Parallel Port PIC Programmer

Parallel Port PIC Programmer uses PC's parallel port for communication between the programming software and simple PIC programmer hardware. OshonSoft.com Parallel Port PIC Programmer software is very easy to use and works on all Windows platforms. Simulator IDE should also be installed on your PC prior to using this programming software.

  • Publisher: Oshon Software
  • Last updated: April 1st, 2008
Lalim Parallel Port Control

Lalim Parallel Port Control

Most of engineering industry using PC to control hardware with using additional I/O card but with Lalim Parallel Port Control you can use your default printer port controlling external device such as switching on/off light or control electronic devices. What does this program [does is] trigger the parallel port (Printer port) 's data pin by your command.

  • Publisher: Lalim Software
  • Last updated: September 12th, 2008
Lalim Parallel Port Control Professional

Lalim Parallel Port Control Professional

Lalim Parallel Port Control can control hardware through the parallel port (printer port) and can also control a remote PC parallel port through a network. Lalim Parallel Port Control requires a certain knowledge of electronics and if you are not comfortable with a soldering iron, or don't know what a 1k resistor is, then it is probably advisable that you do not attempt to use this program.

  • Publisher: Lalim Software
  • Last updated: December 6th, 2008

Spi software parallel port in Description

BasicX

BasicX

The BasicX Programming Environment uses the PC parallel port for the BX01 Chip and the BasicX Emulator. Windows 95/98/ME can access the port automatically. The Test program is pre-loaded on the SPI EEPROM chip at the factory. It will work until another program gets downloaded to the chip.

  • Publisher: NetMedia, Inc.
  • Last updated: April 19th, 2008
GE-Flash

GE-Flash

GE-Flash is a complete X2212/X2444 programming system for programming Phoenix, Delta and Ranger radios on Windows 2000 and Windows XP. A simple parallel port adapter and kernel mode driver allows direct programming of X2212 and X2444 EPROM's on your PC.

  • Publisher: rtzaudio
  • Last updated: July 17th, 2018
DSLR Shutter

DSLR Shutter

DSLR Shutter is designed to be a simple tool to capture long-exposure images from digital SLR cameras using their "bulb" setting. It allows you to specify the number of frames, their duration, and various delays to act as a software interval timer for your camera.

  • Publisher: Stark Labs
  • Last updated: March 19th, 2011
WinPic800

WinPic800

WinPic800 is a free PIC programmer software compatible with the Tait-style of hardware programmers. The software controls the hardware device via a PC parallel port. After you configure WinPic800 to work with the parallel programmer, you may plug the hardware on the parallel port, insert a PIC on the programmer, turn it on and then click on Device then Detect Device.

  • Publisher: Sisco Benach Font
  • Home page: www.winpic800.com
  • Last updated: April 27th, 2012
SoftCollection Parallel Port Viewer

SoftCollection Parallel Port Viewer

SoftCollection Parallel Port Viewer lets you view and change the state of selected Parallel Port. You can select the required LPT port from its menu. Using the displayed pin-outs of parallel port, you can connect your electronic circuit without any error. Please remember to use a resistor of at lest 500 ohm to protect your computer.

Additional Spi software parallel port selection

Parallel Port Control

Parallel Port Control

A simple User Control developed in C#.Net used to control the Parallel Port. The following tasks can be performed using it: - Send data to Data Pins. - Receive data from Data Pins. - Send data to Control Pins. - Receive data from Control Pins. - Read current status of Status Pins. - Implement Synchronous and Asynchronous Loops. - Implement UP, DOWN and UP-DOWN Counters.

NFC Port Software

NFC Port Software

NFC Port Software installs drivers for RC-S380/S USB NFC reader on Windows PCs. RC-S380/S product is capable of communicating both with devices that conform to the NFC Forum specifications and with various contactless IC cards, including FeliCa and ISO/IEC 14443 Type A / Type B.

  • Publisher: Sony Corporation
  • Home page: www.sony.net
  • Last updated: November 2nd, 2016
Timer

Timer

This is a program that enables the PC to connect to the outside world, by using the printer and parallel port LPT1. Hardware can then be connected to the computer to control solenoids, relays, lights and sensors etc. Timer, consists of 11 forms. A main form, 8 output forms, 1 inputs form and a settings form. The main form gives the status of all 8 outputs and 5 inputs.

  • Publisher: Hot Time Software
  • Last updated: October 13th, 2011
PonyProg2000

PonyProg2000

Ponyprog is very powerful and popular microchip programmer. Ponyprog enables the user to program EEPROM, FLASH and PIC's using user friendly tools and multiple programmer types. Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.

BASCOM-AVR

BASCOM-AVR

BASCOM AVR is a very powerful and easy-to-use compiler for the AVR series of micro controllers developed by Atmel. The program comes with a very user-friendly interface and a set of simple commands, and provides more flexibility than other programs in this category.

  • Publisher: MCS Electronics
  • Home page: www.mcselec.com
  • Last updated: December 15th, 2016
KELLYWARE KCam

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

Printfil

Printfil

Print from DOS, Unix, Linux to Windows printers: USB, GDI, PDF, e-mail, network, IP, fax. Capture LPT1:-LPT9: & COM1:-COM9: and redirect the jobs, even to a printer physically connected to the captured port and w/out physical LPT/COM ports installed

  • Publisher: aSwIt Srl: Mail, Print for DOS, Windows
  • Home page: www.printfil.com
  • Last updated: December 18th, 2022
Notebook Manager

Notebook Manager

Notebook Manager is a management software that allows you to control various hardware and software settings on your personal laptop computer. The Notebook Manager contains 9 functions which allows you to view and/or config your laptop computer's BIOS settings and Microsoft Windows functions.

  • Publisher: Acer
  • Last updated: July 25th, 2008
Z-Downloader Utility

Z-Downloader Utility

Z-Downloader Utility is a free program that can be used to send firmware and files to printers, over network, USB, RS-232 or Parallel port connections. The program automatically detects the printers connected to your computer and displays the information.

  • Publisher: Zebra Technologies
  • Last updated: April 29th, 2015
LcdStudio

LcdStudio

LcdStudio the premiere Lcd Software supporting Lcd with the Sed133x, T6963c ,LC7981 or ks0108 controllers connected to the parallel port at any display panel size, giving the end user access to easy to use graphical componentes such as labels, gauges, clocks and even animated images.

Related topics Trending topics

© Podnova Windows Library, 2024
Privacy • Cookie policy • Submit • Contact