Toshiba battery control program in Title/Summary

TOSHIBA Battery Check Utility

TOSHIBA Battery Check Utility is a free-to-use application for Windows OS that allows you to check if your battery pack is affected and qualifies for a replacement. Please Remove the battery and find the battery part number and serial number. The app is very easy-to-use.

• Publisher: TOSHIBA Corporation
• Last updated: December 19th, 2016

TOSHIBA PeakShift Control

TOSHIBA PeakShift Control is a free program that stops drawing electricity from the AC power supply and start to use the on-board battery. The program helps to avoid power use during the electricity peak and enables electricity to be consumed at a more even rate throughout the day.

• Publisher: TOSHIBA
• Last updated: October 29th, 2012

N4PY Icom Control program

The N4PY Icom Control Program controls the following Icom Radios: IC-756PRO, IC-756PROII, IC-756PROIII, IC-706MKIIG, IC-746, IC-746PRO, IC-703, IC-775, IC-756, IC-718, IC-781, IC-7000, IC-7100, IC-7200, IC-7600, IC-9100, IC-7410, IC-7700, and IC-7800. It also has support for the Microtelecom Perseus receiver both as a standalone receiver and Panadapter to be used with an Icom radio.

• Publisher: N4PY Software
• Last updated: March 28th, 2014

Toshiba battery control program in Description

TOSHIBA HW Setup

TOSHIBA HW Setup is a tool that allows you to configure your Toshiba computer. The program will open up a menu where you will be able to personalize settings of your laptop or computer, for example, SATA data, laptop display configuration, LAN, CPU, and boot settings.

• Publisher: TOSHIBA
• Last updated: January 13th, 2014

BatteryCat

BatteryCat is a neat, easy to use battery monitoring program for MS Windows. It shows you all relevant information of the battery of your laptop. It also provides low level data gathering functions and enables you to save the current health state of the laptop's battery and thus monitor the long term development of the battery.

• Publisher: johannes
• Last updated: June 27th, 2013

Winmeter

Winmeter is a powerful battery analysis program that enables the user to download and integrate data from the entire range of battery test instruments (including legacy products) and produce text and graphical battery analysis reports. With these reports, the user can quickly identify batteries that are likely to require preventative maintenance.

• Publisher: ETG
• Home page: www.explorergrp.com
• Last updated: March 16th, 2015

Battery Analyser

The Battery analyzer program displays discharge and recharge curves. Reports are stored on disk and printed. The measurement reports are suitable to give to a customer as test documentation. All parameters can be set in a 'profile' per battery type. Then, simple profile selection by barcode serial number is done to start the correct measurement.

• Publisher: Battery Condition Test
• Last updated: October 26th, 2016

EasyX10

Features: - EasyX10™ Version 2.1 for Windows 95, 98, NT, 2000 XP - Supports CM11a, Cosmic House, LynX-10 and PowerLinc Serial - Easy and Fast setup for X10 devices - Build multiple events per address - Create a control program of Timer and Logic Events - Supervisor Mode supervises control program for non-programmable controllers

• Publisher: MGP Software
• Last updated: January 14th, 2010

Additional Toshiba battery control program selection

Niko Home Control Program

Niko Home Control Program is a program that enables the automation and control of all fixed electrically operated applications in your home such as lights, shaded lights, shutters and awnings, ventilation, heating and power points. through push buttons, a smart phone or a touch screen. It also enables monitoring the consumption of gas and water as well as the production of electricity.

• Publisher: niko
• Last updated: December 8th, 2016

Extron Electronics - Signal Processing Products Control Program

Signal Processing Products Control Program is a program designed for DVS 304, DVS 304 DVI, IN1508, RGB-DVI/HDMI 300, RGB-HDMI 300 A, Annotator and USP 507 signal processing devices. It provides support for the 1080p CVT output resolution, 1080p CVT EDID resolution on the Annotator.

• Publisher: Extron Electronics
• Home page: www.extron.com
• Last updated: April 3rd, 2015

Extron Electronics - ISSISM Control Program

The Extron ISM 482 Integration Scaling Matrix Switcher has eight configurable inputs and two audio/video outputs with built-in, high performance video scalers.The Extron ISS 408 Integration Seamless Switcher provides truly seamless, glitch-free switching between eight inputs, each of which is fully configurable for all video types.

• Publisher: Extron
• Home page: www.extron.com
• Last updated: April 6th, 2010

Matrix CATV Equipment Control Program

The software will support multiple RF power output and multiple attenuator generator configurations. Scripts of ASX generator commands entered by the user in the user configuration file are automatically executed for the selected frequency plan when it is loaded.

• Publisher: Matrix Test Equipment, Inc.
• Last updated: May 26th, 2009

UltraVNC

UltraVNC is a powerful helpdesk remote control program. With it, you can access your PC from anywhere and remotely help people and customers. It can display the screen of one computer (Server) on the screen of another (Viewer). The program allows the viewer to use their mouse and keyboard to control the Server Computer remotely.

• Publisher: UltraVnc
• Home page: www.uvnc.com
• Last updated: October 29th, 2023

CursorFX

Cursor FX is a program which customizes the appearance of your cursor. It comes with various themes that can be used as such; yet you have the ability to add effects, trails, or sounds for getting a personal creation. The application provides a wide range of themes which you can preview before enabling them. It also allows you to add special effects to the cursor.

• Publisher: Stardock Corporation
• Home page: www.stardock.com
• Last updated: October 28th, 2020

TOSHIBA Accessibility

Toshiba Accessibility lets you use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility also lets you make the Fn key a sticky key, meaning you press it once, release it, and then press a function key to activate the hot key function

• Publisher: TOSHIBA
• Last updated: May 23rd, 2011

xp-AntiSpy

xp-AntiSpy 3.96-8 is a tiny utility that will allow you to take control over the automatic services in Windows XP that could be undesirable for you. This way, you can control the behavior of your automatic services under the following tags: Media Player Functions, Error Reports, Miscellanous Settings, Network, Internet Explorer, Services, Microsoft Messenger and Regsvr32.dlls.

• Publisher: Christian Taubenheim
• Home page: xp-antispy.org
• Last updated: June 28th, 2016

SQL Source Control

SQL Source Control is an addon for Visual Studio. It lets you connect databases to source code control applications using SQL. The application comes with a Subversion Evaluation Repository which can be used without the help of your source code control program. It has custom filters to exclude objects from source control.

• Publisher: Red Gate Software Ltd
• Home page: www.red-gate.com
• Last updated: July 30th, 2015

MySQL-Front

MySQL-Front is a Windows front end for MySQL database server. It allows you to connect to database sources or import Text, SQL, MS Excel, MS Access, and ODBC files. Dialog based data handling simplifies the editing process; SQL commands can also be run by experienced users.

• Publisher: Nils Hoyer
• Home page: www.mysqlfront.de
• Last updated: June 28th, 2017