Transmission line calculator in Title/Summary

Transmission Line

Transmission Line is modeling software capable of accurately modeling a variety of loudspeaker enclosure types. Main features: - Model Sealed, Ported, TL, MLTL Loudspeaker Enclosures. - Frequency Response, Phase, Impedance, Driver Displacement, Port Velocity, Group Delay Plots. - Can model multiple side branches. - Easy driver offset modeling.

• Publisher: Leonard Audio
• Home page: leonardaudio.co.uk
• Last updated: August 25th, 2015

Si9000 PCB Transmission Line Field Solver

With the Si9000 PCB Transmission Line Field Solver you can view the full range of 2 and 4-port S-parameters in a single chart window. The Si9000 frequency-dependent calculations can be refined using extended substrate data. Assign substrate values by frequency band to accommodate material from manufacturers who specify parameters that vary by frequency.

• Publisher: Polar Instruments Ltd
• Last updated: December 13th, 2011

Command Line Calculator

Command Line Calculator is general purpose calculator. Calculations are entered on command line and result is produced after pressing enter. There is no limit to the length of expression, which can be entered into calculation. Program supports variables and most of the typical functions like trigonometric functions, logarithms, basic operations and so on.

• Publisher: Jarkko S halme
• Last updated: April 27th, 2015

Transmission line calculator in Description

JJSmith

JJSmith is a transmission-line calculator for both advanced and beginning users. The program is based on the Smith chart and it provides high-accuracy computations without recourse to paper, compass or straightedge. It helps engineers design and analyze networks.

• Publisher: Tonne Software
• Last updated: May 19th, 2014

TransCalc

Transcalc is an analysis and synthesis tool for calculating the electrical and physical properties of different kinds of RF and microwave transmission lines. Transcalc aspires to be more functional in the long run and well-documented with appropriate references to formulas that are used. Transcalc is built using the GIMP toolkit (GTK) for its GUI interface.

• Publisher: Gopal Narayanan
• Home page: transcalc.sourceforge.net
• Last updated: November 10th, 2011

ImpedCalc

ImpedCalc is a free transmission line impedance calculator. The result is based on the formula, not 2D field solve, so it can only confirm the accuracy in a relative range. Accuracy evaluation presents Surface Microstripe, explained: when H=4.5, T=1.2, Er=4.2 and change W. The result is compared with Polar. Surface Microstrip of ImpedCalc is relatively accurate.

• Publisher: Aaron Lee
• Home page: impedcalc.sourceforge.net
• Last updated: December 16th, 2017

Ultimate Calculator

Ultimate Calculator is a simple command-line calculator. This tiny calculator may come in handy, but only if you want to do basic calculating (only addition, subtraction, multiplication and division operations) with just two numbers. No square roots, exponentiation or other operations are allowed. No more than one calculation before the program shuts down.

• Publisher: Jonny's Computer Solutions, Inc.
• Last updated: October 12th, 2008

Estalo Converter

Estalo Converter is a practical and efficient freeware system for conversion of many types of units and currencies, counting with the most complete list of currencies and their conversions.It works independently of the user to be accessing the Internet, making automatic updates as soon as the user is on-line.

• Publisher: Estalo Desenvolvimento e Tecnologia
• Last updated: August 18th, 2008

Additional Transmission line calculator selection

SuperSmith

This graphics-intensive program is a valuable transmission-line calculator for both advanced and beginning users. Based on the venerable and highly intuitive Smith chart, it provides high-accuracy computations without recourse to paper, compass or straightedge.

• Publisher: Fulton Findings
• Home page: www.barringer1.com
• Last updated: September 12th, 2016

RF ToolBox

RF Toolbox is an antenna design and electronics/electrical tool package. It takes you step by step through the design of the following types of antennas: - Dipole - Fat Dipole - Yagi - Long Yagi - J-Pole - Super J-Pole - Log Periodic - Loop Antenna (MW Box Loop Antenna) - Cubic Quad.

• Publisher: Black Cat Systems
• Home page: www.blackcatsystems.com
• Last updated: June 9th, 2018

QuickSmith

QuickSmith is a Smith Chart based linear circuit simulation program for Microsoft Windows. QuickSmith was designed to perform a rapid and efficient Smith Chart calculation. It uses the advantage of Windows environment to provide friendlier way to simulate Graphical RF designs.

• Publisher: nathaniyer
• Home page: www.nathaniyer.com
• Last updated: December 3rd, 2009

TILOS

TILOS is a time-location planning program designed for managing linear construction projects, basically infrastructure projects. The program can be used in different construction industries like Highway, Railway, Pipeline and Tunnel construction, but also in Water Engineering or Transmission Line Building.

• Publisher: Linear project GmbH
• Last updated: June 4th, 2012

GPRSim.net

GPRSim.net can serve as a tool for teaching basic concepts of electromagnetic wave propagation in different medias. It is also very well fitted to explain to customers the always around questions: How deep? How small object?. Showing different scenarios with different frequencies one can in a simple and very didactic way show that it all depends on many factors.

• Publisher: Geoscanners AB
• Last updated: December 16th, 2009

EPD100

This free educational utility is a 2d boundary element method field solver. It allows you to view the equipotential lines around a transmission line. By seeing where the lines are densest you can view the areas of strongest field and better understand which areas of a structure have a greater effect on impedance.

• Publisher: Polar Instruments
• Last updated: May 20th, 2011

BMTL

BMTL can handle transmission lines with up to nine conductors and several transmission lines can be connected to each other. Excitation can be done by either voltage sources connected at the ends of the lines or incident fields. Lines are terminated in resistors. Properties of the transmission lines are described for the program by entering the inductance and capacitance matrices.

• Publisher: SP Technical Research Institute of Sweden
• Last updated: September 23rd, 2011

Ucka - Accountant on-line euro calculator

Accountant on-line euro calculator is a online calculator connected to internet used to counts prices using actual currency rate. Can be used to cross currency rate converter. (reference currency euro),calculate of tax(on click will show you the price including tax, without tax and the tax itself. )

• Publisher: UtilStudio
• Last updated: January 2nd, 2013

LINE

LINE is the most popular news content curation service in Asia and aims to deliver valuable content that enrich your everyday life. Allows you to make free voice calls and send free messages whenever and wherever you are, 24 hours a day. You can send one-on-one and group texts, and use international voice and video calls with your friends.

• Publisher: Line Corporation
• Home page: line.me
• Last updated: October 17th, 2024

CE CALC - Civil Calculator

Stand alone software version of the CECALC website. Runs on the Windows .NET platform. Performs civil engineering calculations for hydrology, open channels, culverts, gravity sewer, transmission lines, traffic/road geometry, surveying/earthwork, pavement, concrete floors and unit conversions.

• Publisher: Up2Specs Engineering
• Home page: www.cecalc.com
• Last updated: January 18th, 2012