Winamp midi machine control in Title/Summary

NTONYX MIDI Matrix

MIDI Matrix is a Device Driver for MIDI streams control. It offers 4 MIDI ports for MIDI input and a commutation matrix, capable of directing the data from the input ports to one of the output MIDI ports (or MIDI devices) installed in the computer. This means that MIDI events can be routed from several applications to a single MIDI port and played back simultaneously.

• Publisher: NTONYX
• Last updated: November 30th, 2009

NI MCA Tank Control Reference Example

This reference example of a basic tank control application is based on the machine control reference architecture described in a series of articles on Developer Zone. This type of control application may be used in bioreactors, refineries, bevergae production, or any other system which involves control of distributed equipment such as valves, relays, heaters, coolers, stirrers, etc.

• Publisher: National Instruments
• Home page: zone.ni.com
• Last updated: March 5th, 2015

XOR Control

With Xor Midi Control you can control many Winamp functions such as play/stop, volume, balance, equalizer... via MIDI controller or keyboard. You need .NET Framework 3.5 to run program. Features: - Fixed some bugs - More I/O controls (for playlist, system ...) - Changed application design - Languages

• Publisher: Marek Šedivý
• Home page: java.xor.sk
• Last updated: November 29th, 2011

Winamp midi machine control in Description

NordBeat's MIDI Remoter

MIDI Remoter is a MIDI remote control tool designed to remote control Reason or other Hard or Software Synthesizers, Mixers, MIDI components, etc. You can create your own Programs and Banks with Buttons, Switches, Sliders and even insert Graphics with build-in Editor. You can use MIDI Remoter with a Touch-Screen Monitors or simple a mouse for Live Acts.

• Publisher: NordBeat
• Last updated: November 12th, 2011

Klee Demo

MIDI output to any hardware or software synthsInternal or MIDI clock control10 preset slots for instant recall of parametersPresets can be saved to and loaded from diskSynchronous load - loading of pattern happens on clock pulses, and not in betweenLoad on Play feature to allow for loading of pattern each time clock startedCustom definable note range allows for alternative scales

• Publisher: Defective Records Software
• Home page: www.defectiverecords.com
• Last updated: February 1st, 2011

Carbide Motion

Carbide Motion is a custom made machine control software that allows you to control your machine from your computer. With this program you can load G-code files, and generally control your machine. The program is compatible with Nomad 883 Pro and Shapeoko 3 desktop CNC machines.

• Publisher: Carbide 3D LLC
• Home page: carbide3d.com
• Last updated: March 26th, 2019

FlashCut CNC

The FlashCut CNC software is an easy to use, yet powerful operator control panel that puts all of the machine control you need at your fingertips. It dynamically displays the tool path while sending real time motion commands to the Signal Generator over a high speed USB connection for smooth, dependable, accurate motion on most PC's or Laptops.

• Publisher: FlashCut CNC
• Last updated: August 24th, 2022

WinNC GE Fanuc Series 21

WinNC GE Fanuc Series 21 is a program that allows you to learn all CNC industry controls that are common on the market on a Concept machine or on a programmers place. It offers you the possibility to work on the PC as well as on the machine-control and to get familiar with all aspects of control programming in detail.

• Publisher: EMCO group
• Last updated: June 19th, 2017

Additional Winamp midi machine control selection

CSC Show Control

CSC Show Control is a complete theatrical/live sound show control package. Shows can be designed using the cuelist methodology for sequential events to be triggered or for one-off, less predictable events, pages of hot scenes to instantly recall any state or sound can be pre-programmed.

• Publisher: CTR Electronics
• Home page: www.ctrelectronics.co.uk
• Last updated: July 3rd, 2017

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

• Publisher: Native Instruments GmbH
• Last updated: September 19th, 2023

Max

Max contains a rich set of user interface tools, including dials, buttons, menus, and text editors. Max can control MIDI devices, serial devices, send data over a network, and handle user input devices. Any source of control is easily connected to anything you want to control.

• Publisher: Cycling '74
• Home page: cycling74.com
• Last updated: June 1st, 2012

CX-Supervisor

CX-Supervisor is dedicated to the design and operation of PC visualisation and machine control. It is not only simple to use for small supervisory and control tasks, but it also offers a wealth of power for the design of the most sophisticated applications. CX-Supervisor boasts powerful functions for a wide range of PC based HMI requirements.

• Publisher: Omron Electronics Limited
• Home page: industrial.omron.eu
• Last updated: February 4th, 2012

Trimble Installation Manager

Trimble Installation Manager allows you to install and update supported software on various Trimble devices. You can update receiver firmware, options, and radio settings for the connected Trimble R8s or R9s receiver; update receiver firmware for the connected Trimble R2 or R10 receiver, and more.

• Publisher: Trimble Navigation Ltd
• Home page: www.trimble.com
• Last updated: May 15th, 2019

Virtual Midi Controller 3 LE

Knobs, faders & other controls to send midi events.A virtual midi port for directly connecting the VMC-LE with other software. Midi loopback drivers are not needed to connect VMC-LE with programs like Cubase and Sonar.A midi event control for viewing and sending midi cc's & other non-note events.

• Publisher: Soundco Software
• Last updated: April 21st, 2011

Music Library

Music Library enables you to catalog and play any music files and media you have. This program enables you to catalog and deal with any music, saved or not in your hard drives. With a friendly interface, the program provides an easy way to manage your collections, where you can view your collection by locations, albums, artists, year or genres.

• Publisher: WenSoftware
• Last updated: April 8th, 2008

Business Center - HCE

Business Center - HCE is an ideal graphical program for the preparation and management of data for Heavy Civil Construction projects. It allows you to make the data preparation for machine control and site positioning systems, quantities takeoff and cost estimating.

• Publisher: Trimble Navigation Ltd.
• Home page: www.trimble.com
• Last updated: March 13th, 2013

RME MIDI Remote

MIDI Remote is a remote control tool for RME's MADI devices. In version 1.6, the MADI Bridge, Micstasy, ADI-648, ADI-642, ADI-6432, ADI-8 QS and the M-series converters are supported. MIDI Remote includes extensive and superior features to easily control lots of devices at the same time. It is capable of multi-client operation.

• Publisher: RME
• Home page: www.rme-audio.de
• Last updated: August 19th, 2010

Denford VR Milling

Denford VR CNC Milling is a powerful CNC machine control program. It provides simplified options in datum setting, work offset features and a virtual reality 3D simulation engine. The program pre-scan feature checks for syntax errors and invalid codes prior to machining.

• Publisher: Denford Limited
• Last updated: July 21st, 2015