Z-stack home automation profile in Title/Summary

InControl Home Automation

InControl HA is able to control z-wave devices, Clipsal devices (through c-gate), Foscam IP cameras, Belkin Wemo switches and many more. Scenes and triggers give you the ability to make your home truly intelligent. Create security scenes that will notify you when unexpected motion happens while you are away from home.

• Publisher: Moonlit Software, LLC
• Last updated: October 27th, 2015

Texas Instruments Z-Stack Home

Z-Stack Home is a ZigBee-based Home Automation (ZHA) compliant protocol stack for the CC2530 and CC2538 System-on-Chip. The program includes sample applications to test the ZigBee system. It can also be used to design new applications suited for your need.

• Publisher: Texas Instruments
• Last updated: March 28th, 2014

Home Anywhere Computer

Home Anywhere Computer is a computer-based application used to set up the Home Anywhere system. Also, the program is able to interact with the home automation / alarm / CCTV system. This application can only be installed on a computer-based platform, which includes desktop computers, laptops, and enterprise servers.

• Publisher: AnB Rimex SA
• Last updated: February 24th, 2017

Z-stack home automation profile in Description

HouseBot

HouseBot runs as a Windows application that can use a variety of automation protocols to provide a heterogeneous solution for home control. Software Remotes extend the control of the automation server by using customizable graphic interfaces that can run on remote (and mobile) devices.

• Publisher: CeBotics LLC
• Home page: www.housebot.com
• Last updated: June 20th, 2016

Cognitier HomeWeb

The combined HomeWeb software and service allow you to send commands to your computers from over the Internet. Run command-driven applications and query, convert, and retrieve files from your computers. Push files to your cloud storage account.

• Publisher: Cognitier, Inc.
• Last updated: September 22nd, 2014

xPLHal Manager

The xPL Project has been started to improve home automation technologies. Its aim is to create a unified protocol to allow the control and monitoring of all devices within the home. xPL is an open protocol intended to permit the control and monitoring of home automation devices. xPLHal Manager for Windows help you to configure xPLHal devices on your network.

• Publisher: The xPL Project
• Home page: xplproject.org.uk
• Last updated: June 18th, 2012

Izaxon X10 Service

The X10 gateway for use by home automation applications. Izaxon X10 Service is a Windows based X10 driver gateway. It allows home automation applications to control and receive events from X10 devices in your home. It runs on a Windows based PC, as a Windows service, and communicates via an X10 PC module.

• Publisher: Izaxon
• Home page: izaxon.com
• Last updated: April 5th, 2010

HomeSeer

A remote control home automation application that makes it easy to access your email, lights, appliances, and any other home automation devices from the web. HomeSeer includes a built-in web server that is easy to configure. It supportsMicrosoft Agent for text to speech as well as voice recognition for commands.

• Publisher: HomeSeer Technologies LLC
• Last updated: December 27th, 2011

Additional Z-stack home automation profile selection

Skype

Skype is an audio/video calling tool with chat and file sharing features. It allows you to call anyone with a Skype/Outlook account for free. It features a variety of emoticons and video clips that can be sent to your friends while chatting. Skype also allows you to make calls to phone numbers to any country by paying per-minute call charges.

• Publisher: Microsoft
• Home page: www.skype.com
• Last updated: November 28th, 2024

Loxone Config

Close to 200 pre-programmed function blocks are available to make configuration a breeze – from intelligent lighting control and automatic shading right through to energy management with solar integration. These blocks enable a quick and easy configuration of Loxone Smart Homes large and small.

• Publisher: Loxone Electronics GmbH
• Home page: www.loxone.com
• Last updated: June 22nd, 2018

HouseCall for Home Networks

HouseCall for Home Networks scans all your home network devices to identify potential risks and offer advice on how to eliminate them. This is quite useful since there is an increasing number of smart home devices connected to home networks, including IP Cameras, TVs, NAS (network storage) units, smartphones, tablets, and printers.

• Publisher: Trend Micro Inc.
• Home page: housecall.trendmicro.com
• Last updated: January 30th, 2018

Webcam Zone Trigger

Traditional software simply alerts you when motion is detected within the camera's view. Zone Trigger lets you decide what will happen when motion is detected in an unlimited number of "Hot Spots" located anywhere within the camera's range.

• Publisher: Omega Unfold
• Last updated: August 19th, 2020

TI Z-Stack Home

Z-Stack Home is TI's ZigBee Home Automation (ZHA) compliant protocol stack for the CC2630, CC2530 and CC2538 System-on-Chip. It is based on Z-Stack, ZigBee PRO 2012 protocol stack with ZCP (ZigBee Compliant Platform) certification and 802.15.4 MAC certification.

• Publisher: Texas Instruments, Inc.
• Home page: www.ti.com
• Last updated: January 26th, 2016

ModCom

Free Windows software for Data Acquisition & Control, HMI / SCADA, Industrial Automation, Process Control, and Data Logging. Read data from sensors, turn on/off electrical equipment, output control voltages, count or time events, move stepper motors.

• Publisher: Weeder Technologies
• Home page: weedtech.com
• Last updated: March 13th, 2024

nikobus

Nikobus, the home automation system from Niko for the control of heating, lighting, audio, etc., is already on a version 3.2.3. The Nikobus software is structured in a user-friendly and intuitive manner. The software is conveniently arranged and therefore easy to use. Copying of function keys ensures ultimate programming convenience.

• Publisher: Niko Belgium
• Last updated: May 30th, 2008

HouseLinc

HouseLinc gives you the power to setup, automate and manage your entire INSTEON network. Main features: - Setup and manage your whole house INSTEON network - Create powerful scenes to create just the right ambiance at the touch of a button - Create timer events based on time of day, sunrise or sunset

• Publisher: Smarthome
• Last updated: October 21st, 2013

TiF454

TiF454 is configuration software for Web Server F45 through USB or Ethernet ports. Web Server F454 is home automation controller hardware from the developer. It can be used to configure various components like lighting, alarm, CCTV, etc. Energy management settings are also available in the application.

• Publisher: BTicino
• Last updated: August 1st, 2013

Domoticz

Domoticz is a home automation system written in c++ and has a webserver frontend for end-users. This program lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like temperature, rain, wind, UV, Electra, Gas, Water and others.

• Publisher: Domoticz
• Home page: www.domoticz.com
• Last updated: May 22nd, 2014