Eeprom vag com 11.11 atmega in Title/Summary

Vag-Tacho USB v.3.01

Vag-Tacho USB is a Windows program that helps you install the Vag-Tacho drivers on you computer. You have to connect the OBD connector to car diagnostic socket. Then connect hardware interface to any USB port of your Pc.The program will try to connects any kombi and will display type of the kombiinstrument.

• Publisher: OBDtool.Org
• Last updated: November 2nd, 2009

VAG Vehicle Diagnostics Interface

This program lets you test your VAG vehicles using VAG Vehicle Diagnostics Interface hardware. It includes ImmoPlus, VAG Commander software, and Tag Key Tool function. ImmoPlus supports prepare delaer key for VAG new cars such as VW 4th/5th immobilizer.

• Publisher: China UOBD2 Auto Diagnostic Tool Co., Ltd.
• Last updated: December 26th, 2015

VAG-COM

VAGCOM is a software package for Windows that emulates the functions of the dealers' very expensive proprietary scan tools.CAN is a new means of communicating with the car for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles.

• Publisher: Ross-Tech
• Home page: www.ross-tech.com
• Last updated: December 15th, 2010

Eeprom vag com 11.11 atmega in Description

MegaLoad

MegaLoad is a Windows based boot loader for all Atmel ATMega microcontrollers that support the Bootloader function. MegaLoad is a solution for everybody who wants fast loading (~8k in 3 seconds) and easy software upgrade via MCU RS232 port. Simple Monitor window is available to help you to debug your code.

• Publisher: MicroSyl
• Last updated: April 11th, 2008

Device Programmer Desktop

Device Programmer Desktop is designed to replace the earlier version of XPROG™ programmer. Device Programmer Desktop is fully upwardcompatible hardware with XPROG™ programmer and have many additional features. The Device Programmer Desktop supports in circuit and on board programming 68HC05,68HC08, 68HC11, 68HC(S)12, TMS370, AVR, ATMEGA, PIC,SPI, EEPROM and FLASH memories.

• Publisher: DB Software
• Last updated: March 1st, 2012

ISP Programmer

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories. Communication with devices is made serially in system without the need to pull the chip out of the socket or desolder it.

• Publisher: Adam Dybkowski
• Last updated: December 3rd, 2011

MProg

MProg has a clear user interface for selecting settings and a facility to save EEPROM templates to file which can be loaded later for programming more devices. That makes it a great choice to programm your FTDI devices.

• Publisher: FTDI Ltd
• Home page: www.ftdichip.com
• Last updated: August 6th, 2010

SEEVAL 32

It includes everything to quickly develop a reliable Serial EEPROM design. Features: - Windows 95/98, ME, NT, 2000, and XP -Total Endurance™ software model -SEEVAL 32 developer board -SEEVAL 32 user interface software -RS-232 serial cable -Power supply -Serial EEPROM sample pack -SEEVAL 32 Quick Start Guide

• Publisher: Microchip Technology Inc.
• Last updated: March 18th, 2010

Additional Eeprom vag com 11.11 atmega selection

BASCOM-AVR

BASCOM AVR is a very powerful and easy-to-use compiler for the AVR series of micro controllers developed by Atmel. The program comes with a very user-friendly interface and a set of simple commands, and provides more flexibility than other programs in this category.

• Publisher: MCS Electronics
• Last updated: December 15th, 2016

Serial EEPROM Programmer

Very useful software for reading and writing 93Cxx, 24Cxx, and 24Wxx series EEPROMs. Needs only a very simple hardware, connects to parallel or serial port.It is just a simple software for testing and programming serial EEPROMs using the PC parallel or serial port. Supply voltage +5V is taken directly from the port. Warning - some parallel ports can't be used this way.

• Publisher: Zdenek Janovsky
• Home page: hw-server.com
• Last updated: May 29th, 2012

Arduino

The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. This software can be used with any Arduino board. Experience the Arduino IDE online. Whether you're at home or on the go, code, upload and access your projects anytime from your browser.

• Publisher: Arduino
• Last updated: February 29th, 2024

PICkit

PICkit is a powerful programmer application with scripting support. The program includes comes with a logic analyzer, logic output and auto detection of devices. It enables in-circuit debugging on most PIC microcontrollers. It runs, halts and single steps the program while the PIC microcontroller is embedded in the application.

• Publisher: Microchip Technology Inc
• Last updated: February 7th, 2009

mikroProg Suite For PIC

This software is used for programming with ALL of Microchip microcontroller families which includes:PIC10F, PIC12F, PIC16F, PIC18F, PIC18F-K, PIC18F-J, PIC24F-KA, PIC24F-J, PIC24H-J, dsPIC30F, dsPIC30F-SMPS,dsPIC33F-J and PIC32MX. It is compatible with all MikroElektronika programmers for Microchip devices.

• Publisher: MikroElektronika
• Home page: www.mikroe.com
• Last updated: December 26th, 2012

PonyProg2000

Ponyprog is very powerful and popular microchip programmer. Ponyprog enables the user to program EEPROM, FLASH and PIC's using user friendly tools and multiple programmer types. Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.

• Publisher: Claudio Lanconelli
• Home page: ponyprog.sourceforge.net
• Last updated: August 2nd, 2017

VCDS

Displays critical timing information on TDI engines in graphical format and allows graphing of Measuring Blocks (live data) in oscilloscope format via an open-source plug-in. Full support for new VW/Audi models requiring a direct CAN connection for diagnostics.

• Publisher: Ross-Tech LLC.
• Home page: www.ross-tech.com
• Last updated: December 11th, 2017

Khazama AVR Programmer

The goals of this program is a nice small, fast, reliable and simple to use program.You can set your settings according to your project. this steps will execute after you push "Auto Program" button on the main window or press CTRL+P shortcut.Fuses and Lock window help you to set settings for AVR chips.

• Publisher: Behzad khazama
• Last updated: July 17th, 2011

GIGABYTE VGA @BIOS

GIGABYTE VGA @BIOS allows you to backup and update graphic card flash memory. It automatically detects the BIOS version and EEPROM size of your GIGABYTE graphic cards. VGA @BIOS only supports ATI Radeon HD 5000-series,6000-series,7000-series, R7 200-series, R7 300 series, R9 200series, R9 300series, R9F/NANO series Models, and RX400 series Models.

• Publisher: Gigabyte
• Last updated: August 6th, 2015

iDFS

iDFS is a for CDMA tool designed for the iPhone 4 and iPad 2 devices. The program enables you to change or reset the RF calibration data, to flash the firmware of the device, restore custom NV items, rebuild and clear EEPROM, NVM, EFS area, unlock SPC, MSL, SPC3, FSK, OTKSL, User Account, MIN and SIM locks.

• Publisher: Telecom Logic
• Last updated: March 29th, 2020