Podnova Player  Windows library  Podnova home
License: All
Sort by: Relevance

Motor control circuits in Title/Summary

Troubleshooting - Motor Controls

Troubleshooting - Motor Controls

The focus of Troubleshooting Control Circuits is to develop the skills required to diagnose and repair malfunctions in control circuits. It builds on the concepts covered in Troubleshooting Electrical Circuits V4 and includes 10 new troubleshooting tips to help you improve your troubleshooting strategies.

Troubleshooting Motor Circuits

Troubleshooting Motor Circuits

Troubleshooting Motor Circuits is an application for learning and practicing, proven techniques for effective motor circuit troubleshooting with realistic simulations. Multiple practice simulations give your students the chance to learn and practice new methods and techniques.

  • Publisher: Simutech Multimedia Inc.
Pololu Simple Motor Controller

Pololu Simple Motor Controller

Pololu Simple Motor Controller is a program that allows the full control of your hardware Pololu controller device. It provides a wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications.

  • Publisher: Pololu
  • Home page: www.pololu.com
  • Last updated: November 25th, 2014

Motor control circuits in Description

STM8MC-KIT

STM8MC-KIT

The STM8/128-MCKIT starter kit is an integrated system designed to provide a complete, ready-to-use motor control application developed around the STMicroelectronics STM8 microcontroller. This starter kit is particularly suited to drive 3-phase brushless motors (either AC induction or permanent magnet types).

  • Publisher: STMicroelectronics
  • Last updated: February 16th, 2010
WaveWin

WaveWin

Wavewin Sniffer allows for directly capturing AC/DC transient data from a laptop computer. The Sniffer is a mini DAU unit that includes a small hand held recorder with up to 8 non intursive clamp on hall-effect current sensors. Using the Sniffer is like putting the glasses on. It allows the engineers to see exactly what is happening on the power system.

  • Publisher: Softstuf, Inc.
  • Home page: www.wavewin.net
  • Last updated: October 9th, 2011
EnerVista LM10 Setup

EnerVista LM10 Setup

The relay also has an interface port to communicate with the optional LM10 Programmable Display Unit (PDU). This display unit allows for local programming and monitoring of the relay. Matched sets of three phase Current Transformers (CT) and one ground CT are also available as part of the LM10 package.

B4R

B4R

B4R is a development tool for native Arduino and ESP8266 programs. It contains all the libraries and functions for using Arduino features such as LCD Display, DC Motor Control, LED Control, Light Dimmer, Pulse Width Modulation, Servo Motor Control, and Button control.

  • Publisher: Anywhere Software
  • Home page: www.b4x.com
  • Last updated: September 9th, 2021
KELLYWARE KCam

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

Additional Motor control circuits selection

PSIM

PSIM

PSIM’s power electronics simulator can be used for the design of power supplies, motor drives, battery storage systems, microgrid connections, and multi-level converters. It can create embedded program codes from control system block diagrams with a single click.

  • Publisher: Powersim, Inc.
  • Last updated: February 24th, 2023
SoMove

SoMove

SoMove is apowerful program designed for setting up Schneider Electric motor control devices. It incorporates numerous useful functions for the device setup phases- Design, Commissioning and Maintenance. It allows the preparation of configuration files, file management and storage, and print-out of the list of parameters.

  • Publisher: Schneider Electric
  • Last updated: August 26th, 2020
SuperDrive G2

SuperDrive G2

SuperDrive G2 is a program for the parameter-setting, command editing, and monitoring of WEG variable speed drives. It has a simple interface for the real-time monitoring of motor speed, current, DC-link voltage, and heat-sink temperature. Drives can be connected to your computer through USB, Bluetooth, RS232, and RS485 interfaces.

  • Publisher: WEG
  • Last updated: November 29th, 2019
Dicktator

Dicktator

Dicktator is a engine management software required for Dicktator components. Features : -1 to 12 cylinders are supported but 3 is excluded. -Fuel control adjustable in 1,5,10,Standard,250 micro second increments. -Fully interpolated RPM and load sites. -Load sensing BT map sensor or T.P.S. -Load range 3 BAR map sensor: -100KPA to 200KPA. -Water, air temperature and T.P.S sensor

  • Publisher: Graham Susman
  • Last updated: December 23rd, 2009
CenterONE

CenterONE

CenterONE was developed after years of watching customers struggle to design and order their MCC's. CenterONE simplifies this process through its user-friendly interface which helps to reduce user error and enables customers to get their MCC's more quickly.

  • Publisher: Rockwell Automation
  • Home page: www.ab.com
  • Last updated: October 16th, 2012
Celestron MCupdate

Celestron MCupdate

This program allows you to download new firmware from the Celestron website and update your motor control board of accessories with the latest firmware available. Make sure you select the COM port that is attached to your telescope and that you are using the proper Programming cable.

PowerTools Pro

PowerTools Pro

PowerTools Pro is an advanced motion control programming tool for servo motor applications. The program supports many servo programming modules including Epsilon EP, Control Techniques' Unidrive SP, and Digitax ST-Z drives. The application makes programming simpler using drag-and-drop of sequencing functions.

  • Publisher: Emerson Electric Co.
  • Home page: www.emerson.com
  • Last updated: August 27th, 2022
EFL CNC

EFL CNC

This is a program to control 3 axis stepper motors for GCode CNC projects. You can load your Gcode file and stream it to the Arduino and run your CNC machine. It can flash your Arduino UNO by single Click on button, simple. Setting your parameters is also simple.

Frigodata XP

Frigodata XP

The high-performance software FRIGODATA consistently sets new standards in the refrigeration and building automation market. This intelligent telecommunications software permits the central monitoring of connected systems around the clock. Whether refrigeration plants, ventilation and lighting control, with FRIGODATA you can monitor and analyse any number of control circuits.

  • Publisher: Wurm GmbH & Co KG
  • Home page: www.wurm.de
  • Last updated: August 26th, 2014
ROBOTC Virtual Worlds - VEX

ROBOTC Virtual Worlds - VEX

Robot Virtual Worlds is a high-end simulation environment that enables students, without robots, to learn programming.RVW simulates popular real world VEX®, LEGO®, and TETRIX® robots in 3D environments while using the same language, ROBOTC, to program both virtual and physical robots. The RVW environment is perfect for home, classroom, and competition environments.