Phytron stepper motor control in Title/Summary

Nanopro

NanoPro is a powerful control application designed for users without much experience of stepper motor technology. The program enables you to configure one of the Nanotec SMCI12, SMCI33, SMCI35, SMCI36, SMCI47-S-2, SMCP33 stepper motor controls or a Plug & Drive motor of the PDx-N series.

• Publisher: Nanotect Electronic GmbH Co. Kg
• Last updated: July 8th, 2015

Arcus Technology Inc. Performax Series

Performax Series is a free program that allows you to configure various Performax Stepper Motor Controllers. It allows the USB communication between the devices and the computer, enabling you to set the COM port, the baud rate and the device ID in order to exchange data.

• Publisher: Arcus Technology
• Home page: www.arcus-technology.com
• Last updated: July 10th, 2015

Troubleshooting - Motor Controls

The focus of Troubleshooting Control Circuits is to develop the skills required to diagnose and repair malfunctions in control circuits. It builds on the concepts covered in Troubleshooting Electrical Circuits V4 and includes 10 new troubleshooting tips to help you improve your troubleshooting strategies.

• Publisher: Simutech Multimedia Inc.
• Last updated: February 12th, 2011

Phytron stepper motor control in Description

STAC6 Configurator

The STAC Configurator™ software makes setting up and configuring STAC stepper drives a snap. The STAC6 Configurator™ software is used to setup and configure the motor, control mode, I/O, and encoder settings of each STAC6 stepper drive. This short video steps through setting up a STAC6 drive with this software.

• Publisher: Applied Motion Products
• Last updated: May 28th, 2012

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

• Publisher: KellyWare
• Home page: www.kellyware.com
• Last updated: April 12th, 2012

RoutOut CNC

Whether you are building your own CNC Machine/ converting an existing machine or you have simply bought a kit. The Routout software will enable you to control your new addition to the workshop with ease, RoutOut CNC Manager will control your stepper motor step and direction drive board directly from you LPT port (Parallel printer Port) Three axis Control i.e X,Y,Z.

• Publisher: RoutOut CNC
• Last updated: January 26th, 2010

SureStep PRO

SureStep PRO is a windows-based configuration software for use with SureStep STP-DRV-4850 and STP-DRV-80100 advanced stepper drives. It helps you program and configure different models of SureStep. You can adjust and reverse the stepper motor rotation.

• Publisher: Automation Direct
• Home page: www.automationdirect.com
• Last updated: March 26th, 2013

STM8MC-KIT

The STM8/128-MCKIT starter kit is an integrated system designed to provide a complete, ready-to-use motor control application developed around the STMicroelectronics STM8 microcontroller. This starter kit is particularly suited to drive 3-phase brushless motors (either AC induction or permanent magnet types).

• Publisher: STMicroelectronics
• Last updated: February 16th, 2010

Additional Phytron stepper motor control selection

PSIM

PSIM’s power electronics simulator can be used for the design of power supplies, motor drives, battery storage systems, microgrid connections, and multi-level converters. It can create embedded program codes from control system block diagrams with a single click.

• Publisher: Powersim, Inc.
• Last updated: February 24th, 2023

SoMove

SoMove is apowerful program designed for setting up Schneider Electric motor control devices. It incorporates numerous useful functions for the device setup phases- Design, Commissioning and Maintenance. It allows the preparation of configuration files, file management and storage, and print-out of the list of parameters.

• Publisher: Schneider Electric
• Last updated: August 26th, 2020

SuperDrive G2

SuperDrive G2 is a program for the parameter-setting, command editing, and monitoring of WEG variable speed drives. It has a simple interface for the real-time monitoring of motor speed, current, DC-link voltage, and heat-sink temperature. Drives can be connected to your computer through USB, Bluetooth, RS232, and RS485 interfaces.

• Publisher: WEG
• Last updated: November 29th, 2019

EFL CNC

This is a program to control 3 axis stepper motors for GCode CNC projects. You can load your Gcode file and stream it to the Arduino and run your CNC machine. It can flash your Arduino UNO by single Click on button, simple. Setting your parameters is also simple.

• Publisher: EFL
• Home page: www.engineeringforless.com
• Last updated: June 20th, 2020

Dicktator

Dicktator is a engine management software required for Dicktator components. Features : -1 to 12 cylinders are supported but 3 is excluded. -Fuel control adjustable in 1,5,10,Standard,250 micro second increments. -Fully interpolated RPM and load sites. -Load sensing BT map sensor or T.P.S. -Load range 3 BAR map sensor: -100KPA to 200KPA. -Water, air temperature and T.P.S sensor

• Publisher: Graham Susman
• Last updated: December 23rd, 2009

Pololu Simple Motor Controller

Pololu Simple Motor Controller is a program that allows the full control of your hardware Pololu controller device. It provides a wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications.

• Publisher: Pololu
• Home page: www.pololu.com
• Last updated: November 25th, 2014

CenterONE

CenterONE was developed after years of watching customers struggle to design and order their MCC's. CenterONE simplifies this process through its user-friendly interface which helps to reduce user error and enables customers to get their MCC's more quickly.

• Publisher: Rockwell Automation
• Home page: www.ab.com
• Last updated: October 16th, 2012

Celestron MCupdate

This program allows you to download new firmware from the Celestron website and update your motor control board of accessories with the latest firmware available. Make sure you select the COM port that is attached to your telescope and that you are using the proper Programming cable.

• Publisher: Celestron
• Last updated: April 18th, 2010

PowerTools Pro

PowerTools Pro is an advanced motion control programming tool for servo motor applications. The program supports many servo programming modules including Epsilon EP, Control Techniques' Unidrive SP, and Digitax ST-Z drives. The application makes programming simpler using drag-and-drop of sequencing functions.

• Publisher: Emerson Electric Co.
• Home page: www.emerson.com
• Last updated: August 27th, 2022

EFL Programmer

EFL Programmer is a program that allows you to control 6 axis stepper or servo motors for different kind of automation projects. You can program the position, speed and acceleration of this motors to follow your paths. Also, you can enable them to send and receive signals to and from outside.

• Publisher: Babak Manafi
• Last updated: October 31st, 2016