Stepper motor controller delphi in Title/Summary

Pololu Simple Motor Controller

Pololu Simple Motor Controller is a program that allows the full control of your hardware Pololu controller device. It provides a wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications.

• Publisher: Pololu
• Home page: www.pololu.com
• Last updated: November 25th, 2014

EFL Controller

This application helps you control axis stepper or servo motors for deferent kind of automation projects. It lets you program the position and speed of this motors to follow your paths. The program gives you the ability to send and receive signals to and from outside.

• Publisher: EFL
• Last updated: August 7th, 2014

Nanopro

NanoPro is a powerful control application designed for users without much experience of stepper motor technology. The program enables you to configure one of the Nanotec SMCI12, SMCI33, SMCI35, SMCI36, SMCI47-S-2, SMCP33 stepper motor controls or a Plug & Drive motor of the PDx-N series.

• Publisher: Nanotect Electronic GmbH Co. Kg
• Last updated: July 8th, 2015

Stepper motor controller delphi in Description

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

• Publisher: KellyWare
• Last updated: April 12th, 2012

SureStep PRO

SureStep PRO is a windows-based configuration software for use with SureStep STP-DRV-4850 and STP-DRV-80100 advanced stepper drives. It helps you program and configure different models of SureStep. You can adjust and reverse the stepper motor rotation.

• Publisher: Automation Direct
• Last updated: March 26th, 2013

Kelly PM User Program

Kelly’s PM motor controller is full bridge or 4 quadrant controller. It provides fast and reliable electronic direction control. There is no arc, spark, or life limit on motor direction changes. Features: - Extended fault detection and protection. The LED flashing pattern indicates the fault sources.

• Publisher: Kelly Controller
• Last updated: November 16th, 2011

Festo Configuration Tool Plugin CMMO-ST

The CMMO-ST plug-in enables the configuration and commissioning of the motor controller type CMMO-ST. The motor controller CMMO-ST includes a position controller with integrated closed-loop controllers for current, velocity and position. The Festo Configuration Tool (FCT) represents an access point for plug-ins with uniform project and data management.

• Publisher: Festo
• Last updated: March 19th, 2014

RoutOut CNC

Whether you are building your own CNC Machine/ converting an existing machine or you have simply bought a kit. The Routout software will enable you to control your new addition to the workshop with ease, RoutOut CNC Manager will control your stepper motor step and direction drive board directly from you LPT port (Parallel printer Port) Three axis Control i.e X,Y,Z.

• Publisher: RoutOut CNC
• Last updated: January 26th, 2010

Additional Stepper motor controller delphi selection

PositioningDrives

PositioningDrives is a program that offers support and guidance throughout the planning process of an electric drive system. This application provides you with support for finding the right combination of electromechanical components, an electric motor and a suitable motor controller.

• Publisher: Festo AG & Co.KG
• Last updated: January 27th, 2016

IndraSize

IndraSize is a program to calculate the optimum sizes of drive controllers, motors and mechanical transmissions. The motion sequence of the application can be configured freely with data of the kinematics and selection of the laws of motion. If the motion sequence can not be determined, the sizing can also be calculated with the relative duty cycle.

• Publisher: Bosch Rexroth AG
• Home page: www.boschrexroth.com
• Last updated: August 24th, 2016

Arcus Technology Inc. Performax Series

Performax Series is a free program that allows you to configure various Performax Stepper Motor Controllers. It allows the USB communication between the devices and the computer, enabling you to set the COM port, the baud rate and the device ID in order to exchange data.

• Publisher: Arcus Technology
• Last updated: July 10th, 2015

Festo Configuraton Tool Plugin for SFC-DC

Configuration and commissioning software for the motor controller:Main features:- PlugIn for SFC-DC V1.0.1.6 (I/O) - PlugIn for SFC-DC V2.0.0.74 (I/O PB) - PlugIn for SFC-DC V2.1.0.209 (I/O PB CO) - PlugIn for SFC-DC V2.2.1.1 (I/O PB CO DN) - PlugIn for SFC-DC V2.3.0.204 (I/O PB CO DN)

• Publisher: Festo
• Last updated: April 20th, 2010

CNC USB Controller

CNC motion controller is a link between personal computer and drivers for stepper or servo motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).

• Publisher: planet-cnc.com
• Home page: www.planet-cnc.com
• Last updated: April 23rd, 2012

Intel USB eXtensible Host Controller Driver

This driver contains support for the following Intel® Chipsets and Intel® Processors

• Publisher: Intel Corporation
• Last updated: April 1st, 2015

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

• Publisher: Native Instruments GmbH
• Last updated: September 19th, 2023

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller is a free-to-use driver for Atheros network card. This easy-to-install driver is recomended only for Windows XP.

• Publisher: Atheros Communications Inc.
• Last updated: November 14th, 2012

Grbl Controller

Grbl Controller is designed to send GCode to CNC machines, such as 3D milling machines. It isn’t super smart, it just needs to give the user a nice way to get commands down to whatever controller they are using. Qt is pretty cool because you can create a nice GUI application for Windows, Mac and Linux.

• Publisher: Zapmaker
• Last updated: June 27th, 2014

Cutting Plotter Controller

The Cutting Plotter Controller is a software program that lets you perform settings at your computer instead of having to make them at the plotter's control panel. In particular, frequently-used cutting condition settings and complicated registration mark reading procedures can be easily performed. Using the Controller together with the driver further improves overall operating efficiency.

• Publisher: Graphtec Corporation
• Home page: www.graphteccorp.com
• Last updated: July 10th, 2010