Podnova Player  Windows library  Podnova home
License: All
Sort by: Relevance

Pololu motor controller delphi in Title/Summary

Pololu Simple Motor Controller

Pololu Simple Motor Controller

Pololu Simple Motor Controller is a program that allows the full control of your hardware Pololu controller device. It provides a wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications.

  • Publisher: Pololu
  • Home page: www.pololu.com
  • Last updated: November 25th, 2014
Pololu Serial Transmitter

Pololu Serial Transmitter

Pololu Serial Transmitter is a simple serial transmitter utility for Windows which allows you to transmit sequences of bytes to a selectable COM port. The Pololu Serial Transmitter is used to send commands to the serially controllable devices, which can help you troubleshoot problems by letting you determine if the fault lies with your serial code or with the device itself.

  • Publisher: Pololu Corporation
  • Home page: www.pololu.com
  • Last updated: April 29th, 2012
Pololu Wixel

Pololu Wixel

This is a Windows application that allows you to load apps onto your Wixel. The Wixel Configuration Utility allows you to write and read settings from the Wixel. The program can open app files in either the WXL format or the standard Intel HEX format.

  • Publisher: Pololu
  • Home page: www.pololu.com
  • Last updated: March 18th, 2013

Pololu motor controller delphi in Description

Kelly PM User Program

Kelly PM User Program

Kelly’s PM motor controller is full bridge or 4 quadrant controller. It provides fast and reliable electronic direction control. There is no arc, spark, or life limit on motor direction changes. Features: - Extended fault detection and protection. The LED flashing pattern indicates the fault sources.

  • Publisher: Kelly Controller
  • Last updated: November 16th, 2011
Festo Configuration Tool Plugin CMMO-ST

Festo Configuration Tool Plugin CMMO-ST

The CMMO-ST plug-in enables the configuration and commissioning of the motor controller type CMMO-ST. The motor controller CMMO-ST includes a position controller with integrated closed-loop controllers for current, velocity and position. The Festo Configuration Tool (FCT) represents an access point for plug-ins with uniform project and data management.

  • Publisher: Festo
  • Last updated: March 19th, 2014
PositioningDrives

PositioningDrives

PositioningDrives is a program that offers support and guidance throughout the planning process of an electric drive system. This application provides you with support for finding the right combination of electromechanical components, an electric motor and a suitable motor controller.

  • Publisher: Festo AG & Co.KG
  • Last updated: January 27th, 2016
IndraSize

IndraSize

IndraSize is a program to calculate the optimum sizes of drive controllers, motors and mechanical transmissions. The motion sequence of the application can be configured freely with data of the kinematics and selection of the laws of motion. If the motion sequence can not be determined, the sizing can also be calculated with the relative duty cycle.

Parker System Solution Finder

Parker System Solution Finder

Parker System Solution Finder is a handy tool that helps you configure the full motor part numbers. It gives the compatible drives based on voltage and feedback type and the motor power and feedback cable part numbers. It also allows the configuration of the multi-axis controller and drive-controller part with compatible breakouts and accessories.

  • Publisher: Parker Hannifin Corporation
  • Home page: www.parkermotion.com
  • Last updated: May 27th, 2013

Additional Pololu motor controller delphi selection

Festo Configuraton Tool Plugin for SFC-DC

Festo Configuraton Tool Plugin for SFC-DC

Configuration and commissioning software for the motor controller:Main features:- PlugIn for SFC-DC V1.0.1.6 (I/O) - PlugIn for SFC-DC V2.0.0.74 (I/O PB) - PlugIn for SFC-DC V2.1.0.209 (I/O PB CO) - PlugIn for SFC-DC V2.2.1.1 (I/O PB CO DN) - PlugIn for SFC-DC V2.3.0.204 (I/O PB CO DN)

  • Publisher: Festo
  • Last updated: April 20th, 2010
Arcus Technology Inc. Performax Series

Arcus Technology Inc. Performax Series

Performax Series is a free program that allows you to configure various Performax Stepper Motor Controllers. It allows the USB communication between the devices and the computer, enabling you to set the COM port, the baud rate and the device ID in order to exchange data.

  • Publisher: Arcus Technology
  • Last updated: July 10th, 2015
Intel USB eXtensible Host Controller Driver

Intel USB eXtensible Host Controller Driver

This driver contains support for the following Intel® Chipsets and Intel® Processors

  • Publisher: Intel Corporation
  • Last updated: April 1st, 2015
Native Instruments Controller Editor

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

  • Publisher: Native Instruments GmbH
  • Last updated: September 19th, 2023
Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller is a free-to-use driver for Atheros network card. This easy-to-install driver is recomended only for Windows XP.

  • Publisher: Atheros Communications Inc.
  • Last updated: November 14th, 2012
Grbl Controller

Grbl Controller

Grbl Controller is designed to send GCode to CNC machines, such as 3D milling machines. It isn’t super smart, it just needs to give the user a nice way to get commands down to whatever controller they are using. Qt is pretty cool because you can create a nice GUI application for Windows, Mac and Linux.

  • Publisher: Zapmaker
  • Last updated: June 27th, 2014
Cutting Plotter Controller

Cutting Plotter Controller

The Cutting Plotter Controller is a software program that lets you perform settings at your computer instead of having to make them at the plotter's control panel. In particular, frequently-used cutting condition settings and complicated registration mark reading procedures can be easily performed. Using the Controller together with the driver further improves overall operating efficiency.

KELLYWARE KCam

KELLYWARE KCam

KCam Router/Mill software is designed to run low cost hobby CNC equipment. Program your paths using the built in Gcode editor, or import DXF, NC, and PLT files. Create signs and plates using your CAD software and import your work into KCam. Dual cutting depth allows for holes and outlines to be punched out after routing.

CTSoft

CTSoft

CTSoft allows you to optimize the drive tuning, back-up the configuration, configure the on-board automation and motion controller and setup the drive-to-drive communications links.rnCommissioning software packages:rnrn - CTSoft - Drive parameter configuration and index motion editor

X-Motor Racing

X-Motor Racing

X-Motor Racing offers an unique experience which hasn't similar experiences. Customizable racing simulation. All is customizable because it's possible to modify all the car specifications, including the physics. This can be useful for many things. It can be useful for adapting a car to the real model car and to make it to behave as the real one.