Mikroc brushless motor controller in Title/Summary

Pololu Simple Motor Controller

Pololu Simple Motor Controller is a program that allows the full control of your hardware Pololu controller device. It provides a wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications.

• Publisher: Pololu
• Home page: www.pololu.com
• Last updated: November 25th, 2014

PanatermBL

This software operates on Windows for communication between PC and brushless motor/brushless inverter/brushless amplifier. Brushless motor/brushless inverter/brushless amplifier has a function to perform serial communication with commercial PC via RS-232 by use of connection cable.

• Publisher: Panasonic Corporation
• Last updated: February 24th, 2014

mikroC PRO for AVR

mikroC PRO for AVR is an ANSI C compiler for Atmel AVR microcontrollers. You get features such as LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, and HID Terminal, which improve the speed of program development.

• Publisher: MikroElektronika
• Home page: www.mikroe.com
• Last updated: July 3rd, 2013

Mikroc brushless motor controller in Description

Marquee Loader

Marquee Loader - lets you upload customized controller settings. The loading calculation model has been developed to provide effective force demands for low cost DIY systems (compared to commercial control loader systems). The model uses control axis position and velocity as the indicator of control surface position and velocity, this is measureed at the brushless motor quadrature encoder.

• Publisher: VDC Display Systems INC
• Home page: vdcds.com
• Last updated: November 23rd, 2011

Kelly PM User Program

Kelly’s PM motor controller is full bridge or 4 quadrant controller. It provides fast and reliable electronic direction control. There is no arc, spark, or life limit on motor direction changes. Features: - Extended fault detection and protection. The LED flashing pattern indicates the fault sources.

• Publisher: Kelly Controller
• Last updated: November 16th, 2011

NewELCAFancoil

NewELCAFancoil is a professional fan coil application with high efficiency EC motor that provides continuous air flow regulation and speed modulation. The brushless motor ensures the perfect adaptation to the thermal load in the ambient and reduces the temperature fluctuations comparing to set point parameters.

• Publisher: Climaveneta
• Home page: www.climaveneta.com
• Last updated: January 30th, 2015

Festo Configuration Tool Plugin CMMO-ST

The CMMO-ST plug-in enables the configuration and commissioning of the motor controller type CMMO-ST. The motor controller CMMO-ST includes a position controller with integrated closed-loop controllers for current, velocity and position. The Festo Configuration Tool (FCT) represents an access point for plug-ins with uniform project and data management.

• Publisher: Festo
• Last updated: March 19th, 2014

Roland DRIVER MDX-540

This driver enables you to perform 2.5D engraving using Roland engraving machines or modeling machines via a Windows-based program. MDX-540 Subtractive Rapid Prototyping (SRP) System is a 4-axis desktop CNC device, that uses a 400W DC Brushless motor.

• Publisher: Roland DG Corporation
• Last updated: November 20th, 2015

Additional Mikroc brushless motor controller selection

PositioningDrives

PositioningDrives is a program that offers support and guidance throughout the planning process of an electric drive system. This application provides you with support for finding the right combination of electromechanical components, an electric motor and a suitable motor controller.

• Publisher: Festo AG & Co.KG
• Last updated: January 27th, 2016

IndraSize

IndraSize is a program to calculate the optimum sizes of drive controllers, motors and mechanical transmissions. The motion sequence of the application can be configured freely with data of the kinematics and selection of the laws of motion. If the motion sequence can not be determined, the sizing can also be calculated with the relative duty cycle.

• Publisher: Bosch Rexroth AG
• Home page: www.boschrexroth.com
• Last updated: August 24th, 2016

Festo Configuraton Tool Plugin for SFC-DC

Configuration and commissioning software for the motor controller:Main features:- PlugIn for SFC-DC V1.0.1.6 (I/O) - PlugIn for SFC-DC V2.0.0.74 (I/O PB) - PlugIn for SFC-DC V2.1.0.209 (I/O PB CO) - PlugIn for SFC-DC V2.2.1.1 (I/O PB CO DN) - PlugIn for SFC-DC V2.3.0.204 (I/O PB CO DN)

• Publisher: Festo
• Last updated: April 20th, 2010

Arcus Technology Inc. Performax Series

Performax Series is a free program that allows you to configure various Performax Stepper Motor Controllers. It allows the USB communication between the devices and the computer, enabling you to set the COM port, the baud rate and the device ID in order to exchange data.

• Publisher: Arcus Technology
• Home page: www.arcus-technology.com
• Last updated: July 10th, 2015

FlyCam BLGC Manager

FlyCam BLGC Manager is an application designed for operating a FlyCam Brushless Gimbal Controller (FlyCam BLGC). It provides support for the TILT, PAN, ROLL, CTRL and S.BUS input ports in order to control the BLGC and the trim feature applies only to roll control.

• Publisher: FlyCam co.
• Last updated: February 27th, 2015

Intel USB eXtensible Host Controller Driver

This driver contains support for the following Intel® Chipsets and Intel® Processors

• Publisher: Intel Corporation
• Last updated: April 1st, 2015

Native Instruments Controller Editor

Controller Editor turns your Native Instruments hardware controller into a MIDI remote control for your studio and live setup. With this tool, you can precisely define the MIDI messages to send when using your NI controller. You must switch your NI controller to MIDI mode to use this program.

• Publisher: Native Instruments GmbH
• Last updated: September 19th, 2023

Escon Studio

The ESCON servo controllers are small, powerful 4-quadrant PWM servo controllers for the highly efficient control of permanent magnet-activated DC brushed and brushless motors. Escon Studio is an application that allows you to program ESCON servo controllers. It also lets you update the firmware and capture realtime data from the devices.

• Publisher: maxon motor ag
• Last updated: August 14th, 2015

mikroC PRO for PIC

mikroC PRO for PIC is a full-featured ANSI C compiler for PIC devices from Microchip. It is the best solution for developing code for PIC devices. It features intuitive IDE, powerful compiler with advanced optimizations, lots of hardware and software libraries, and additional tools that will help you in your work.

• Publisher: MikroElektronika
• Home page: www.mikroe.com
• Last updated: December 15th, 2015

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller driver

Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller is a free-to-use driver for Atheros network card. This easy-to-install driver is recomended only for Windows XP.

• Publisher: Atheros Communications Inc.
• Home page: www.atheros-drivers.com
• Last updated: November 14th, 2012